tritium-h3, make image from sd card, then write this image to new sd card. occur FDT_ERR_BADMAGIC error

Wed, 21 Oct 2020 02:03:23 +0000

error log:

Found mainline kernel configuration
31792 bytes read in 15 ms (2 MiB/s)
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
No FDT memory address configured. Please configure
the FDT address via "fdt addr

" command.
Aborting!
SCRIPT FAILED: continuing...

Device 0: unknown device
ethernet@1c30000 Waiting for PHY auto negotiation to complete. done
BOOTP broadcast 1
DHCP client bound to address 192.168.1.103 (4 ms)
*** ERROR: `serverip' not set
Cannot autoload with TFTPGET
missing environment variable: pxeuuid
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/01-02-81-79-d2-f8-6c
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C0A80167
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C0A8016
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C0A801
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C0A80
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C0A8
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C0A
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C0
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-sunxi-sunxi
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-sunxi
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default
*** ERROR: `serverip' not set
Config file not found
BOOTP broadcast 1
DHCP client bound to address 192.168.1.103 (3 ms)
*** ERROR: `serverip' not set
Cannot autoload with TFTPGET
BOOTP broadcast 1
DHCP client bound to address 192.168.1.103 (4 ms)
*** ERROR: `serverip' not set
Cannot autoload with TFTPGET

OV5640 camera sensor with libretech tritium all-h3-cc board

Sat, 13 Oct 2018 19:31:40 +0000

Hi,

I have libretech all-h3-cc h2+ DIY board booting with armbian image from https://www.armbian.com/tritium-h3/.

I have updated overlays in armbianEnv.txt file to add i2c2 overlay which enable CSI in kernel. But even after I connect the camera sensor module, I can't find any `/dev/video0` and morever there is not any log in dmesg as well.

Please suggest how can I add get the camera work with the board.

I referred to https://forum.armbian.com/topic/7502-ov5640-on-mainline-kernel/ but as according to that, `/dev/video0` should come up automatically. I don't know what I'm missing.

Please help

Thanks

Librecomputer Tritium H3

Fri, 08 Dec 2017 07:19:19 +0000

[WIP]

https://libre.computer/products/boards/all-h3-cc/

Schematics

Pros:

- yet another H3

Cons:

- micro USB powering

Libre Tritium H3 Latest Topics

tritium-h3, make image from sd card, then write this image to new sd card. occur FDT_ERR_BADMAGIC error

OV5640 camera sensor with libretech tritium all-h3-cc board

Librecomputer Tritium H3