RSS Bot

Description Add uarts dts as per vendor spec How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Built orangepi5-plus with kernel 6.8 and connected serial gps to uart3-m1 ttyS3 - got a fix Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] My changes generate no new warnings View the full article

networking: main-config: introduce NETWORKING_STACK to control network exts; allow "none"; fix typo networking: exts: introduce sanity checks, debug info protect against enabling networking exts directly debug logging fix typo in ext name networking: main-config: introduce NETWORKING_STACK to control network exts; allow "none"; fix typo NETWORKING_STACK can be set to none (in config phase, pre-extensions) to not-add any networking extensions keep defaulting to systemd-networkd if BUILD_MINIMAL and NetworkManager otherwise fix typo in extension name add NETWORKING_STACK to change-tracking View the full article

Description Closing https://github.com/armbian/build/issues/6773 Jira reference number AR-2382 How Has This Been Tested? [x] When netplan random mac defs are present, device (Odroid M1) does not get IP Checklist: [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Starting from Linux kernel v5.4, the HAVEGED inspired algorithm has been included in the Linux kernel, see the LKML article and the Linux Kernel commit. Additionally, since v5.6, as soon as the CRNG (the Linux cryptographic-strength random number generator) gets ready, /dev/random does not block on reads anymore: see this commit. SOURCE: jirka-h/haveged How Has This Been Tested? [x] Succesfully built nanopi-r5c BRANCH="current" RELEASE="jammy, bookworm, noble, trixie" Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] My changes generate no new warnings View the full article

Description Correcting hook locations in https://github.com/armbian/build/pull/6756 Jira reference number AR-2384 How Has This Been Tested? [x] Manual image assembly Checklist: [x] My changes generate no new warnings View the full article

Description Add v3 patch of rkvdec2. Add a v4l2 patch to fit rkvdec2's 16x16 minnimal decoding size for chromium. Remove VDPU121 node because there is already a 4K H264 decoder. Gstreamer can't handle two. Add udev rule for chromium How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh kernel BOARD=rock-5b BRANCH=edge DEB_COMPRESS=xz KERNEL_CONFIGURE=no KERNEL_GIT=shallow [x] gst-launch-1.0 --no-fault filesrc location=/home/jfliu/Big_Buck_Bunny_2160_10s_H264_1s.mp4 ! parsebin ! v4l2slh264dec ! autovideosink [x] chromium can decode 4K h264 video. Checklist: Please delete options that are not relevant. [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Information: https://docs.banana-pi.org/en/BPI-F3/BananaPi_BPI-F3 https://gitee.com/bianbu-linux Boot log: https://paste.armbian.com/ucabodotet.yaml Linux dmesg: https://paste.armbian.com/exagihupok.yaml Currently booting from SPI is an unknown. Flashing u-boot to eMMC: (This is not apart of the PR and needs to be added in the future.) echo 0 > /sys/block/mmcblk2boot0/force_ro sleep .50 dd if="bootinfo_emmc.bin" of="/dev/mmcblk2boot0" bs=512 conv=notrunc dd if="FSBL.bin" of="/dev/mmcblk2boot0" bs=512 seek=1 conv=notrunc dd if="FSBL.bin" of="/dev/mmcblk2boot0" bs=512 seek=512 conv=notrunc dd if="fw_dynamic.itb" of="/dev/mmcblk2" bs=512 seek=1280 conv=notrunc dd if="u-boot.itb" of="/dev/mmcblk2" bs=512 seek=2048 conv=notrunc sync Tested: Bluetooth and Wifi (useless without an ANT) Ethernet (1 and 2) PCIe USB HDMI Debug UART The only IMG I was able to build and test on was Ubuntu Noble Minimal. Not sure if that is a limitation of RISCV in the builder or a problem elsewhere. Neither Debian Sid or Ubuntu Noble Standard would build without error. NOTE: One major difference between this build and the others available else where is the use of SYSLINUX/EXTLINUX instead of the ENV file. View the full article

Description Add community support for lckfb TaishanPi. This PR depends on the following two PRs: https://github.com/armbian/linux-rockchip/pull/197 https://github.com/armbian/linux-rockchip/pull/196 How Has This Been Tested? [x] Successfully built. [x] System startup. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description don't store parameters for networking link establishment (avoid ghost wan/lan/eth link led up on bootup) How Has This Been Tested? [x] built nanopi-r5c, booted with wan cable plugged, rebooted unplugging it --> wan led was correctly NOT powered up Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] My changes generate no new warnings View the full article

Description This fixes a lot of labels not getting applied properly. Examples: https://github.com/armbian/build/pull/6763 https://github.com/armbian/build/pull/6758 How Has This Been Tested? [x] To be tested along the way Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code View the full article

Description packages.debian.org has been down a lot lately, so builds could not finish since the build system wants to find out the package name and version for base-files. Use Packages.gz from the mirrors as an alternative method to search for this information. How Has This Been Tested? [x] Building works as normal even if packages.debian.org is down Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings View the full article

Making its debut this week at Augmented World Expo (AWE) in Long Beach, ElectricMaple is an innovative project by Collabora and PlutoVR designed to enhance standalone XR experiences through remote-rendering. View the full article

Description station-m2: use radxa's vendor u-boot. The issue of legacy & vendor kernel failing to boot has been resolved using the radxa's vendor u-boot. It has been tested on legacy, vendor, current, and edge kernel branches. How Has This Been Tested? [x] Successfully built. [x] System startup. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description bash-completion adds the functionality for autocompleting command when pressing . This is an essential shell functionality and should be enabled even on a minimal image. The package has no dependencies and is slim: https://packages.ubuntu.com/noble/bash-completion How Has This Been Tested? [x] Install minimal image without bash-completion: pain 😵‍💫 [x] Install minimal image without bash-completion: nice and efficient 🌈 Checklist: [x] My code follows the style guidelines of this project [ ] My changes generate no new warnings View the full article

Description Maintainace. How Has This Been Tested? [x] Noticed that it breaks on building if this repo is enabled Checklist: [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Renaming network device to eth0 How Has This Been Tested? [x] Generated image Checklist: [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description This will allow dynamic selection and we could make even leaner NM free minimal images. Which will be defaulted to systemd networking. move Netplan with it Jira reference number AR-2373 How Has This Been Tested? [ ] Brief assembly test Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Rename audios like other rk3588 boards. Jira reference number [AR-9999] Documentation summary for feature / change Please delete this section if entry to main documentation is not needed. If documentation entry is predicted, please provide key elements for further implementation into main documentation and set label to "Needs Documentation". You are welcome to open a PR to documentation or you can leave following information for technical writer: [ ] short description (copy / paste of PR title) [ ] summary (description relevant for end users) [ ] example of usage (how to see this in function) How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Test A [ ] Test B Checklist: Please delete options that are not relevant. [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Add support for rk3399 based SBC Leez P710 How Has This Been Tested? Build noble desktop img with command: ./compile.sh build BOARD=leez-rk3399 BRANCH=edge BUILD_DESKTOP=yes BUILD_MINIMAL=no DESKTOP_APPGROUPS_SELECTED='browsers chat desktop_tools editors email internet multimedia office programming remote_desktop' DESKTOP_ENVIRONMENT=gnome DESKTOP_ENVIRONMENT_CONFIG_NAME=config_base DOWNLOAD_MIRROR=bfsu EXPERT=yes EXTRAWIFI=no KERNEL_CONFIGURE=no PREFER_DOCKER=no RELEASE=noble Write the output img to tf card, inserd the card into the board, power up the board, the board can run into noble desktop. Checklist: [ ✓] My code follows the style guidelines of this project [✓] ] I have performed a self-review of my own code [ ✓]] I have commented my code, particularly in hard-to-understand areas [ ✓]] My changes generate no new warnings [ ✓]] Any dependent changes have been merged and published in downstream modules View the full article

Description Fix boot from btrfs fs in uboot 2024.01/2024.04 How Has This Been Tested? [x] Compile image and boot from (zstd-compressed) btrfs sole rootfs/bootfs partition Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code View the full article

Description basiclly, legacy kernel for board firefly-itx-3588j How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] build [x] boot [x] can play music, Hi-Fi! Checklist: Please delete options that are not relevant. [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings [ ] dependent on https://github.com/armbian/linux-rockchip/pull/193 View the full article

Description Shellcheck errors/warnings were: In lib/functions/rootfs/distro-agnostic.sh line 155: display_alert "Adding to extlinux.conf" "fdtoverlays=${DEFAULT_OVERLAYS[@]}" "debug" ^--------------------^ SC2145 (error): Argument mixes string and array. Use * or separate argument. In lib/functions/rootfs/distro-agnostic.sh line 156: echo " fdtoverlays ${DEFAULT_OVERLAYS[@]}" >> "$SDCARD/boot/extlinux/extlinux.conf" ^--------------------^ SC2145 (error): Argument mixes string and array. Use * or separate argument. In lib/functions/rootfs/distro-agnostic.sh line 193: if [[ -n $DEFAULT_OVERLAYS && -f "${SDCARD}"/boot/armbianEnv.txt ]]; then ^---------------^ SC2128 (warning): Expanding an array without an index only gives the first element. Fixes https://github.com/armbian/build/pull/6744 How it was tested [x] Shellcheck does not output any warnings or errors anymore: https://github.com/armbian/build/actions/runs/9522581973/job/26252408859?pr=6746 View the full article

Quick fix for PR https://github.com/armbian/build/pull/6743, see https://github.com/armbian/build/actions/runs/9520292766/job/26245280729 It's not any-globs-to-all-files, but any-glob-to-all-files. View the full article

Description Jira reference number AR-2368 How Has This Been Tested? [x] Generated Gnome desktop image didn't go into suspend by default Checklist: [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Khadas Edge 2 images has been shipped without Uboot and it may cause some problems like not-booting when eMMC and SPI is empty. This PR adds vendor's uboot to Edge 2 images. I've also added BL32 blob because the board doesn't boot when SPI has BL32 blobs and SD card doesn't have. cc @rpardini @viraniac How Has This Been Tested? [x] SPI + SD card [ ] Empty SPI + SD card [ ] SPI + eMMC [ ] Empty SPI + eMMC Checklist: Please delete options that are not relevant. [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article