Tusemanu

for tv-box it's all at your own risk
anything you find in this thread should always be considered non-functional or unreleased
do not buy any tv-box, buy only official boards from manufacturers https://www.armbian.com/partners/

@max-ermilov @hzdm @Tusemanu
As the VPU was working on this kernel, if somebody want to test NPU, GPU and VPU integration,
I recomend Frigate: https://docs.frigate.video/frigate/installation/#rockchip-platform
Object detector: https://docs.frigate.video/configuration/object_detectors#rockchip-platform
Video Processor: https://docs.frigate.video/configuration/hardware_acceleration#rockchip-platform
 

🏆 Become a sponsor, help to add other boards in armbian standart, you don't need to be a programmer to help the community,
just need a copy of the ARM BOARD and a x86 computer to compile new versions.
 
If you like what you see here and want to help: Donate Armbian the like button only costs a few dollars.
Armbian Needs you help!

 
Product Specification:
Chipset: Rockchip RK3576 Octa Core ARM Mali G52 MC3
WIFI: WiFi6 11ax 1x1 80 MHz
wifi controller: AP6275P
RAM: DDR4 4GB/8GB
ROM: eMMC 32GB/64GB/128GB
OS: Android 14.0 || Armbian Vendor 6.1
Ethernet: 1000M Standard RJ-45
Bluetooth: BT 5.0
The RK3576 is indeed a lower-cost SoC but features four Cortex-A72 and four Cortex-A53 cores instead
 
Android Base Files:
H96-RK3576-ANDROID.dts
H96-RK3576-ANDROID.dts
H96-RK3576-BOX.dtb
H96-RK3576-BOX.dtb
RK3576_MiniLoaderAll.bin
 
Vendor Kernel DTS:
@RealAn H96-RK3576-VENDOR.dts
 
Mainline status:
Verify
 
wifi controller: AP6275P
Wifi Driver:
https://drive.google.com/file/d/1n6x4tg5Xh24nWllOTJTq1ldVyDkK8W2Q/view?usp=sharing
 
Flashing Tools:
https://drive.google.com/file/d/1nLgPCBN0qmbzufWDFmISYc92JUpvwMPc/view?usp=sharing
 
build_armbian.csc:
https://drive.google.com/file/d/1VNR5QJlPylPsce9PI9O2TB3wOpshK2Bh/view?usp=sharing
 
@hzdm Stock Firmware: method
https://drive.google.com/file/d/1zLGvIxLE6vf8iSTjsyEr-Ly4MZ6ZahBB/view?usp=sharing
 
Flashing Firmware Tutorial
 
Factory Firmware for H96 Max M9
https://disk.yandex.ru/d/pWGEtRel0P9ejg
https://drive.google.com/drive/folders/1g63F8fGSLEA9iK2_Mqzd6F0xfaTRnGlm?usp=sharing

Factory Firmware for H96 Max M9S
https://disk.yandex.ru/d/H17eGTYCjgmCsg
https://drive.google.com/drive/folders/1Q360l5XbTVsWIvWkqy2xJ0sLpqHRSApM?usp=sharing
 
TTL debug:
RX TX GND pins:

 
 
Enable SDCARD Reader:
@rustamt  method from 4pda

 
 
Force board Maskrom Mode
Maskrom Pins:
 
 
 
 

We left this method behind in 2022,
Our focus here is To compile mainline Linux 
@hzdm did an armbian compilated with vendor kernel, that is better then reverse engineer another device kernel.
but over time, the device will be stuck on a kernel that has little support,
thus making the idea of compiling the mainline 6.8 kernel an ideal
 

Great Idea!! @Tusemanu
you mean uefi images,
you can make it work like this example
it's not easy to find a "bios" or "uefi" translation layer for rk3576
@Tusemanu your proposal would only be possible with UEFI boot,
without UEFI boot your OS can't estimate which pin goes where inside the board.