Orima

Yes. Please wait. I was busy with other personal projects, so I haven't been doing armbian stuff for a few weeks.

So, here's what I had to do to successfully build the image. First, I corrected my board file in the config/board/orangepizero3.csc directory. The processor value was incorrect, it was 616, so I set it to 618.
Menuconf suggested selecting a board with a 618 chip, but in the board file it was listed as family 616.
Later, I copied my board file to the userpatches directory and added the value CONFIG_DRM_PANEL_MIPI_DBI=m. Then I ran the image build script with the menuconf viewer. I was surprised that the CONFIG_DRM_PANEL_MIPI_DBI parameter already had the value "m"; previously, it was empty.
After all these manipulations, the build went smoothly. Thank you so much for your support.

So, here's what I had to do to successfully build the image. First, I corrected my board file in the config/board/orangepizero3.csc directory. The processor value was incorrect, it was 616, so I set it to 618.
Menuconf suggested selecting a board with a 618 chip, but in the board file it was listed as family 616.
Later, I copied my board file to the userpatches directory and added the value CONFIG_DRM_PANEL_MIPI_DBI=m. Then I ran the image build script with the menuconf viewer. I was surprised that the CONFIG_DRM_PANEL_MIPI_DBI parameter already had the value "m"; previously, it was empty.
After all these manipulations, the build went smoothly. Thank you so much for your support.

No, it wont work.
 
I have made another thread just for the orange pi zero 3 and ili9488
https://forum.armbian.com/topic/47971-driving-the-ili9488-lcd-40-inch-cheap-chinese-clone/#comment-208446
Change the GPIOs to match your wiring and connections.
 

Starting with the DTS that worked for me in the orange pi zero 3, with ili9341:
 
 
https://forum.armbian.com/topic/44191-orangepi-zero-lts-ili9341-tft-lcd-and-later-orangepi-zero-3/?do=findComment&comment=204672
 
My DTS is for a customized set of pins that works for me, and it is different than/from the waveshare set of pins.
 
You need to change:
* file name change to: ili9486-ads7846-spi1.dts
* gpio pin selections everywhere in the DTS
* "adafruit,yx240qv29" should be "ilitek,ili9486"
* change "rotation" to "rotate"
* change "reset-gpios = <&pio N N 0>;" to "reset-gpios = <&pio N N 1>;
 
Then sudo armbian-add-overlay ili9486-ads7846-spi1.dts
Reboot
 
(does anyone know the correct DRM driver for ili9486?)