dryce

usb@01c13000 {
            compatible = "allwinner,sun4i-a10-musb";
            reg = <0x1c13000 0x400>;
            clocks = <0x4 0x0>;
            interrupts = <0x0 0x26 0x4>;
            interrupt-names = "mc";
            phys = <0x2b 0x0>;
            phy-names = "usb";
            extcon = <0x2b 0x0>;
            allwinner,sram = <0x2c 0x1>;
            status = "okay";
            dr_mode = "host";
            linux,phandle = <0x61>;
            phandle = <0x61>;
 
        phy@01c13400 {
            #phy-cells = <0x1>;
            compatible = "allwinner,sun7i-a20-usb-phy";
            reg = <0x1c13400 0x10 0x1c14800 0x4 0x1c1c800 0x4>;
            reg-names = "phy_ctrl", "pmu1", "pmu2";
            clocks = <0x2d 0x8>;
            clock-names = "usb_phy";
            resets = <0x2d 0x0 0x2d 0x1 0x2d 0x2>;
            reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
            status = "okay";
            pinctrl-names = "default";
            pinctrl-0 = <0x2e>;
            usb0_id_det-gpio = <0x25 0x7 0x3 0x0>;
            usb0_vbus_power-supply = <0x2f>;
            usb0_vbus-supply = <0x30>;
            linux,phandle = <0x2b>;
            phandle = <0x2b>;
 

    usb0-vbus {
        compatible = "regulator-fixed";
        pinctrl-names = "default";
        pinctrl-0 = <0x49>;
        regulator-name = "usb0-vbus";
        regulator-min-microvolt = <0x4c4b40>;
        regulator-max-microvolt = <0x4c4b40>;
        enable-active-high;
        gpio = <0x25 0x1 0x9 0x0>;
        status = "okay";
        linux,phandle = <0x30>;
        phandle = <0x30>;
 
The file has several differences throughout compared to the armbian version. These are just a few of note. The values for some of the above properties are different in the default file vs the SimpleNAS dtb I used. I don't believe the OTG port was getting power before. There are other property differences throughout and everything appears to be working without issue.
 
 

https://github.com/armbian/build/blob/master/config/kernel/linux-sunxi-next.config#L2882

On OPiOne and OPiLite, there was similar issue that reg_usb0_vbus was not present.
I've fix that a month ago with this commit :
https://github.com/armbian/build/commit/fb0d3c6ea4b06df236d198af825d31a073dd2b81
Maybe similar patch could fix it on BananaPro ...