As the title says, I would like to ask your help if you still keep some old working orange pi one plus image. I have downloaded some images  in https://dl.armbian.com/orangepioneplus/ but none of them work with my boards. I could not SSH to the board or it says  `Network error: Connection refused`

 

As far as I know orange pi one plus H6 image OPi One Plus - 5.1.0-sunxi64 works with board.

 

Please share your working image download links. Thank you for your help

 

5 hours ago, magicstone1412 said:

Please share your working image download links.

No, we will continue to hide out all working images 

19 hours ago, Igor said:

No, we will continue to hide out all working images 

@Igor, getting back to more serious stuff, seeing this post yesterday, I've downloaded the Armbian_5.89.190626_Orangepioneplus_Debian_stretch_dev_5.1.12.img, and it was effectively crashing during boot, and creating a boot loop after 10 seconds wait.

I've decided to compile my own image and ended up with Armbian_5.90_Orangepioneplus_Debian_stretch_dev_5.1.15.img which works without issue.

I don't know where is the issue, maybe the fact that I always compile my own image without Wireguard ...

29 minutes ago, martinayotte said:

I don't know where is the issue, maybe the fact that I always compile my own image without Wireguard ...

 

At least we know something. That could be related, but on the other hand, there were changes elsewhere ...

 

@magicstone1412 This is build system: https://github.com/armbian/build Make two builds for Opi one Plus with additional parameters:
1. EXPERT="yes" WIREGUARD="yes"

2. EXPERT="yes" WIREGUARD="no"

Boot images and report what works and not.

3 hours ago, martinayotte said:

I don't know where is the issue, maybe the fact that I always compile my own image without Wireguard ...

for any special reason or only personal "taste"?

16 minutes ago, guidol said:

for any special reason or only personal "taste"?

Maybe both ...

Several months ago, the compile with Wireguard was broken, since then, I do all my own builds without it ...

2 minutes ago, martinayotte said:

Several months ago, the compile with Wireguard was broken, since then, I do all my own builds without it ...

Since

they are paying attention that it works on Armbian. 

 

I got message few hours ago saying:
"20190702 is released, which should work on all your kernels."

On 7/2/2019 at 9:38 PM, Igor said:

 

@magicstone1412 This is build system: https://github.com/armbian/build Make two builds for Opi one Plus with additional parameters:
1. EXPERT="yes" WIREGUARD="yes"

2. EXPERT="yes" WIREGUARD="no"

Boot images and report what works and not.

Sorry I dont know why VirtualBox hang on my computer. I could not make it run with Ubuntu ISO, getting stuck at installation screen. After that I tried Vagrant but it has similar issues. So I could not build image. Maybe I will try later on the other machine.

 

On 7/2/2019 at 8:58 PM, martinayotte said:

I've decided to compile my own image and ended up with Armbian_5.90_Orangepioneplus_Debian_stretch_dev_5.1.15.img which works without issue.

I don't know where is the issue, maybe the fact that I always compile my own image without Wireguard ...

Could you please upload your image in the download link. I will try your image first.

43 minutes ago, magicstone1412 said:

Sorry I dont know why VirtualBox hang on my computer.

Ask for help and try again.

21 hours ago, magicstone1412 said:

Could you please upload your image in the download link.

That should be working : https://gofile.io/?c=lDWzy8

 

3 hours ago, martinayotte said:

That should be working : https://gofile.io/?c=lDWzy8

 

Thank you so much. It works well on the board.

 

On 7/3/2019 at 11:52 PM, Igor said:

Ask for help and try again.

I found the similar errors here. I have removed "Windows Hypervisor Platform" and the Virtual Box is okay now on my computer. I am using Vagrant and try to build. Thank you for your help

I built an image for the OPi1+ today and it works well. Default options, so it includes wireguard.

13 hours ago, Werner said:

Default options, so it includes wireguard.

It was disabled due to problems
https://github.com/armbian/build/blob/master/lib/configuration.sh#L72

but can now be switched back, since things are under control now
https://github.com/armbian/build/blob/master/lib/compilation-prepare.sh#L46

Images on the download section were rebuild. They are tested and have WG.

I could modprobe wireguard with this image, so I assume that it is included ¯\_(ツ)_/¯

On 7/2/2019 at 9:38 PM, Igor said:

1. EXPERT="yes" WIREGUARD="yes"

2. EXPERT="yes" WIREGUARD="no"

Boot images and report what works and not.

Sorry this is the first time I build image file so  I dont know where I should put these parameters? I have built some images for orange pi one+ but it looks like I did something wrong because the output images have the same size (about 1.2Gb)

 

After the building process was completed, I saw something like this command

./compile.sh BOARD=orangepioneplus BRANCH=next RELEASE=stretch BUILD_DESKTOP=no KERNEL_ONLY=no KERNEL_CONFIGURE=no

I have tried to include your parameters by using this

 

./compile.sh BOARD=orangepioneplus BRANCH=next RELEASE=stretch BUILD_DESKTOP=no KERNEL_ONLY=no KERNEL_CONFIGURE=no EXPERT="yes" WIREGUARD="yes"

But it looks like that is not the correct way!

It is...kind of. Remove the "" from yes and no and you are good to go.

 

Anyways as stated above a freshly built image from the script will work, regardless of wireguard.