Hello, I'm having problems trying to boot armbian (Armbian_20.05.2_Orangepiplus2e_focal_current_5.4.43.img.xz) on this Orange Pi Plus 2e board. 

I'm using a fast original samsung 32gb sd card and I've tried multiple power adaptors. 

 

Here's the output from the serial console: 

U-Boot SPL 2020.04-armbian (Jun 03 2020 - 07:59:25 +0200)

DRAM: 2048 MiB

Trying to boot from MMC1





U-Boot 2020.04-armbian (Jun 03 2020 - 07:59:25 +0200) Allwinner Technology



CPU:   Allwinner H3 (SUN8I 1680)

Model: Xunlong Orange Pi Plus 2E

DRAM:  2 GiB

MMC:   Device 'mmc@1c11000': seq 1 is in use by 'mmc@1c10000'

mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1

Loading Environment from FAT... Unable to use mmc 1:1... In:    serial@1c28000

Out:   serial@1c28000

Err:   serial@1c28000

Net:   phy interface7

eth0: ethernet@1c30000

starting USB...

Bus usb@1c1a000: USB EHCI 1.00

Bus usb@1c1a400: USB OHCI 1.0

Bus usb@1c1b000: USB EHCI 1.00

Bus usb@1c1b400: USB OHCI 1.0

Bus usb@1c1c000: USB EHCI 1.00

Bus usb@1c1c400: USB OHCI 1.0

Bus usb@1c1d000: USB EHCI 1.00

Bus usb@1c1d400: USB OHCI 1.0

scanning bus usb@1c1a000 for devices... 1 USB Device(s) found

scanning bus usb@1c1a400 for devices... 1 USB Device(s) found

scanning bus usb@1c1b000 for devices... 1 USB Device(s) found

scanning bus usb@1c1b400 for devices... 1 USB Device(s) found

scanning bus usb@1c1c000 for devices... 1 USB Device(s) found

scanning bus usb@1c1c400 for devices... 1 USB Device(s) found

scanning bus usb@1c1d000 for devices... 1 USB Device(s) found

scanning bus usb@1c1d400 for devices... 1 USB Device(s) found

       scanning usb for storage devices... 0 Storage Device(s) found

Autoboot in 1 seconds, press <Space> to stop

switch to partitions #0, OK

mmc0 is current device

Scanning mmc 0:1...

Found U-Boot script /boot/boot.scr

3789 bytes read in 2 ms (1.8 MiB/s)

## Executing script at 43100000

U-boot loaded from SD

Boot script loaded from mmc

152 bytes read in 2 ms (74.2 KiB/s)

11634455 bytes read in 556 ms (20 MiB/s)

data abort

pc : [<bff970de>].   lr : [<0001ea42>]

reloc pc : [<4a01a0de>].   lr : [<8a0a1a42>]

sp : bbf54b70  ip : bbfc9dd8. fp : bffdc644

r10: 00000000  r9 : bbf5cee0. r8 : 000639f0

r7 : ffff0031  r6 : 00000200. r5 : bffd2784  r4 : ffff0031

r3 : 00000001  r2 : 0001ea41. r1 : 00011160  r0 : 00000006

Flags: nzCv  IRQs off  FIQs off  Mode SVC_32 (T)

Code: 4664 eb02 0e03 42ac (6827) d105 

Resetting CPU ...



resetting ...



U-Boot SPL 2020.04-armbian (Jun 03 2020 - 07:59:25 +0200)

DRAM: 2048 MiB

Trying to boot from MMC1

 

One time it acutally manage to decompress linux  and I even got a display signal with the linux kernel booting, but it stopped after about 10 seconds. 

The debian image on the organgepi website boots fine, although it's very old and pretty buggy. 

How can I fix this? 

Thanks in advance 

 

EDIT: I've managed to install that version of armbian on the integrated 16gb emmc memory.

Unfortunately armbian only boots when i apply pressure on the circled part of the PCB in the image.

I'm really confused. It boots fine debian image I got from the official link( https://drive.google.com/drive/folders/1wAdkC25BmjMwapWahEEQGTvi-yuwo8Gx ), but it refuses to boot armbian unless I apply pressure to that point of the board.

 

EDIT 2:

I've 3d printed a case for the orange pi and I've put some spongy material on the circled part of the board in order to get it running. It's been running for 10hrs and I haven't noticed any problem. I'm still confused on why the "stock" images work and armbian doesn't without this mod.

 

 

 

Edited June 10, 20206 yr by nik012003
solved

Please provide link to the actual image which you tried.