Hi friends,

 

i'm new here, i found an old Orange Pi PC (V1.2) in my treasure-box and try to find a bootable image in the Orange Pi sources. But any image i tried was faulty, one time the system is starting, but not booting completely ore i have a red LED (don't boot). I tried it with a 8GB und a 32GB card. Pls, can you tell me, where i can download a running image and do you know, if a 32GB-Card ist ok?

 

I write the img with "BelanaEtcher" on the SD-Card, same as i write it on a SD-Card für a Rasp-Pi.

 

Thank you for any helpful answer.

 

Stefan

https://www.armbian.com/orange-pi-pc/

 

Thank's for the link, this link i know. I tried all available images from there, but no image is running. I tried it with different sd-cards, different manufactures and different sizes, no success.

 

 

11 minutes ago, der_c said:

Thank's for the link, this link i know. I tried all available images from there, but no image is running. I tried it with different sd-cards, different manufactures and different sizes, no success.

 

 

the images are normally OK. 
Do you got error messages on the images which doesnt boot complete?

Or do you got a TTL-serial-dongle to give us the output then your OPi PC v1.2 is trying to boot from a card?

32GB cards should also be OK, because armbian will resize the filesystem and the 4xt filesystem can handle 32GB without problems.

Are you sure you have a OPi PC (H3 CPU) and not a Opi PC2 (H5 CPU)?
PC: http://www.orangepi.org/orangepipc/
PC2: http://www.orangepi.org/orangepipc2/

Hi,

 

last question first, yes i#m absolutly shure that i have an oPi-PC, the difference between the boards is significant. Depend on the image what i use, i see a red LED (don't boot) ore i have a green LED and i see a short boot with feedback on the monitor, but it will not boot complete. An Armbian image will not start.

 

I don't have a TTL-serial-dongle, the effort is too great for me. If it is not work, the oPi will go into trash.

 

 

Edited January 21, 20215 yr by der_c

35 minutes ago, der_c said:

 

last question first, yes i#m absolutly shure that i have an oPi-PC, the difference between the boards is significant. Depend on the image what i use, i see a red LED (don't boot) ore i have a green LED and i see a short boot with feedback on the monitor, but it will not boot complete. An Armbian image will not start.

Just in case try one version back, older from archive.