I have compiled u-boot-sunxi-with-spl.bin and and write to sdcard

 

UART show

 

Quote

U-Boot SPL 2020.04-gc1ab7274 (Feb 14 2021 - 22:26:03 -0300)

DRAM: 1024 MiB

Trying to boot from MMC1

NOTICE:  BL31: v2.4(debug):v2.4-358-gd3e145b4c

NOTICE:  BL31: Built : 21:02:09, Feb 14 2021

NOTICE:  BL31: Detected Allwinner H6 SoC (1728)

NOTICE:  BL31: Found U-Boot DTB at 0xc083fb8, model: OrangePi One Plus

INFO:    ARM GICv2 driver initialized

INFO:    Configuring SPC Controller

INFO:    PMIC: Probing AXP805 on RSB

INFO:    PMIC: aldo1 voltage: 3.300V

INFO:    PMIC: aldo3 voltage: 3.300V

INFO:    PMIC: bldo1 voltage: 1.800V

INFO:    PMIC: bldo2 voltage: 1.800V

INFO:    PMIC: bldo3 voltage: 1.800V

INFO:    PMIC: cldo1 voltage: 3.300V

INFO:    PMIC: dcdcd voltage: 0.960V

INFO:    PMIC: dcdce voltage: 1.200V

INFO:    BL31: Platform setup done

INFO:    BL31: Initializing runtime services

INFO:    BL31: cortex_a53: CPU workaround for 855873 was applied

INFO:    BL31: cortex_a53: CPU workaround for 1530924 was applied

NOTICE:  PSCI: System suspend is unavailable

INFO:    BL31: Preparing for EL3 exit to normal world

INFO:    Entry point address = 0x4a000000

INFO:    SPSR = 0x3c9

 

 

U-Boot 2020.04-gc1ab7274 (Feb 14 2021 - 22:26:03 -0300) Allwinner Technology

 

CPU:   Allwinner H6 (SUN50I)

Model: OrangePi One Plus

DRAM:  1 GiB

MMC:   mmc@4020000: 0

Loading Environment from FAT... Unable to use mmc 0:0... In:    serial@5000000

Out:   serial@5000000

Err:   serial@5000000

Net:   No ethernet found.

starting USB...

Bus usb@5101000: USB EHCI 1.00

Bus usb@5101400: USB OHCI 1.0

Bus usb@5311000: USB EHCI 1.00

Bus usb@5311400: USB OHCI 1.0

scanning bus usb@5101000 for devices... 1 USB Device(s) found

scanning bus usb@5101400 for devices... 1 USB Device(s) found

scanning bus usb@5311000 for devices... 1 USB Device(s) found

scanning bus usb@5311400 for devices... 1 USB Device(s) found

       scanning usb for storage devices... 0 Storage Device(s) found

Autoboot in 2 seconds, press <Space> to stop

switch to partitions #0, OK

mmc0 is current device

** No partition table - mmc 0 **

 

Device 0: unknown device

No ethernet found.

missing environment variable: pxeuuid

missing environment variable: bootfile

Retrieving file: pxelinux.cfg/00000000

No ethernet found.

missing environment variable: bootfile

Retrieving file: pxelinux.cfg/0000000

No ethernet found.

missing environment variable: bootfile

Retrieving file: pxelinux.cfg/000000

No ethernet found.

missing environment variable: bootfile

Retrieving file: pxelinux.cfg/00000

No ethernet found.

missing environment variable: bootfile

Retrieving file: pxelinux.cfg/0000

No ethernet found.

missing environment variable: bootfile

Retrieving file: pxelinux.cfg/000

No ethernet found.

missing environment variable: bootfile

Retrieving file: pxelinux.cfg/00

No ethernet found.

missing environment variable: bootfile

Retrieving file: pxelinux.cfg/0

No ethernet found.

missing environment variable: bootfile

Retrieving file: pxelinux.cfg/default-arm-sunxi-sunxi

No ethernet found.

missing environment variable: bootfile

Retrieving file: pxelinux.cfg/default-arm-sunxi

No ethernet found.

missing environment variable: bootfile

Retrieving file: pxelinux.cfg/default-arm

No ethernet found.

missing environment variable: bootfile

Retrieving file: pxelinux.cfg/default

No ethernet found.

Config file not found

No ethernet found.

No ethernet found.

 

Can anyone please help make ethernet work on u-boot so i cant pxe boot? Ty

Your issue report is invalid for one or multiple reasons (non-exhaustive enumeration):

 

• it has been stated at the wrong place
• it lacks fundamental requested data
• it could have been easily solved by a quick search and/or reading documentation

 

Since you refused to use the bug reporting form carefully and follow the information there as you have been asked for we have no intention to further investigate.

 

https://www.armbian.com/bugs