I'm sorry if I come across as incompetent but I have limited skills in linux and I really dont know where else to turn to. 

 

I recently bought a DVB-S reciever to plug into my SBC (banana Pi M1) to use with tvheadend, as opposed to getting a dedicated chinese box. I just cant seem to get it to work!

This is the Tuner I bought: https://www.linuxtv.org/wiki/index.php/Geniatech_HD_Star_DVB-S2_USB2.0

Apparently I have revision 3 of the board: http://imgur.com/3IhpuGG

This is the comparison between the lsusb in the wiki, and my board: http://imgur.com/iHN3R5R

 

This is the output of dmesg:

[    7.847279] sun4i-ss 1c15000.crypto-engine: Die ID 0
[    7.911683] dw2102: su3000_identify_state

[    7.911711] dvb-usb: found a 'SU3000HD DVB-S USB2.0' in warm state.
[    7.911733] dw2102: su3000_power_ctrl: 1, initialized 0

[    7.919512] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[    7.920151] DVB: registering new adapter (SU3000HD DVB-S USB2.0)
[    7.931083] dvb-usb: MAC address: 00:af:78:66:2b:cf
[    8.002739] Registered IR keymap rc-empty
[    8.003442] input: sunxi-ir as /devices/platform/soc@01c00000/1c21800.ir/rc/rc0/input1
[    8.003487] rc rc0: sunxi-ir as /devices/platform/soc@01c00000/1c21800.ir/rc/rc0
[    8.021047] sunxi-ir 1c21800.ir: initialized sunXi IR driver
[    8.025796] lirc_dev: IR Remote Control driver registered, major 246 
[    8.034635] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-ir) registered at minor = 0
[    8.034663] IR LIRC bridge handler initialized
[    8.084644] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok
[    8.300174] DS3000 chip version: 0.208 attached.
[    8.456265] ts2020 2-0060: Montage Technology TS2022 successfully identified
[    8.456359] dw2102: Attached DS3000/TS2020!

[    8.456387] usb 1-1: DVB: registering adapter 0 frontend 0 (Montage Technology DS3000)...
[    8.457379] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
[    8.523385] Registered IR keymap rc-su3000
[    8.523992] input: IR-receiver inside an USB DVB receiver as /devices/platform/soc@01c00000/1c14000.usb/usb1/1-1/rc/rc1/input2
[    8.524650] rc rc1: IR-receiver inside an USB DVB receiver as /devices/platform/soc@01c00000/1c14000.usb/usb1/1-1/rc/rc1
[    8.524674] dvb-usb: schedule remote query interval to 150 msecs.
[    8.524691] dw2102: su3000_power_ctrl: 0, initialized 1

[    8.524700] dvb-usb: SU3000HD DVB-S USB2.0 successfully initialized and connected.
[    8.524875] usbcore: registered new interface driver dw2102
[    8.790118] Adding 131068k swap on /var/swap.  Priority:-1 extents:1 across:131068k SSFS
[   10.156341] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   10.371942] systemd-journald[233]: Received request to flush runtime journal from PID 1
[   10.919515]  RX IPC Checksum Offload disabled
[   10.919550]  No MAC Management Counters available
[   10.919937] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.225766] random: nonblocking pool is initialized
[   13.851099] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   13.852131] NFSD: starting 90-second grace period (net c0e92c80)
[   16.903720] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   16.903812] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   18.533280] dw2102: su3000_power_ctrl: 1, initialized 1

[   18.553986] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
[   18.557242] ds3000_firmware_ondemand: Waiting for firmware upload(2)...
[   19.645835] usb 1-1: DVB: adapter 0 frontend 0 frequency 0 out of range (950000..2150000)
[   19.649659] dw2102: su3000_power_ctrl: 0, initialized 1

[   19.654783] dw2102: su3000_power_ctrl: 1, initialized 1

[   19.674284] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
[   19.674555] ds3000_firmware_ondemand: Waiting for firmware upload(2)...

This is the output of lsusb: 

bpi@bananapitv:~/DVB-S_FW$ lsusb -s 002 -v

Bus 001 Device 002: ID 1f4d:3000 G-Tek Electronics Group 
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x1f4d G-Tek Electronics Group
  idProduct          0x3000 
  bcdDevice            0.00
  iManufacturer           1 
  iProduct                2 
  iSerial                 3 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength          219
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          4 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1 
      bInterfaceProtocol      1 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       1
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1 
      bInterfaceProtocol      1 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x13f2  3x 1010 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       2
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1 
      bInterfaceProtocol      1 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x12d6  3x 726 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       3
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1 
      bInterfaceProtocol      1 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x12ae  3x 686 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       4
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1 
      bInterfaceProtocol      1 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x03ca  1x 970 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       5
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1 
      bInterfaceProtocol      1 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x02ac  1x 684 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       6
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1 
      bInterfaceProtocol      1 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x03ac  1x 940 bytes
        bInterval               1

I even downloaded the firmwares and placed them in /lib/firmware : 

bpi@bananapitv:~/DVB-S_FW$ ls /lib/firmware/ | grep "dvb"
dvb-demod-mn88472-02.fw
dvb-fe-ds3000.fw
dvb-fe-xc4000-1.4.1.fw
dvb-fe-xc5000-1.6.114.fw
dvb-fe-xc5000c-4.1.30.7.fw
dvb-usb-dib0700-1.20.fw
dvb-usb-dw2102.fw
dvb-usb-it9135-01.fw
dvb-usb-it9135-02.fw
dvb-usb-tbs5520.fw
dvb-usb-terratec-h5-drxk.fw
dvb_nova_12mhz.inp
dvb_nova_12mhz_b0.inp
sms1xxx-hcw-55xxx-dvbt-02.fw
sms1xxx-nova-a-dvbt-01.fw
sms1xxx-nova-b-dvbt-01.fw
sms1xxx-stellar-dvbt-01.fw

 

What happens is that I login to the web interface, set up a mux, enable the receiver, and associlate it with the mux I made, but it never seems to work? All my scans fail. Im fairly sure that my line is alright since the cheap chinese box I had beforehand picked up the signals perfectly fine.

 

 

I went to the great and glorious google to try to look for an answer, I found out that for my revision of the tuner, a patch has been developed: 

 

https://gist.github.com/pdp7/cafd7e32fc3ec9e7a268

 

Link: https://github.com/Outernet-Project/orx-rpi/commit/4b336a8940604c91187ea7680a3e991d3c28ce37#diff-8b56063fa57e24b219cc9aba37202653

 

I've read that you need to recompile the kernel to patch it. 

 

This is the current kernel I am on: 

 

bpi@bananapitv:~$ cat /proc/version 
Linux version 4.6.3-sunxi (root@pluton) (gcc version 5.3.1 20160413 (Ubuntu/Linaro 5.3.1-14ubuntu2) ) #7 SMP Tue Jul 5 16:23:41 CEST 2016


bpi@bananapitv:~$ uname -a
Linux bananapitv 4.6.3-sunxi #7 SMP Tue Jul 5 16:23:41 CEST 2016 armv7l GNU/Linux

I edited /etc/apt/sources.list and uncommented "deb-src" and then did apt-get update and tried: 

bpi@bananapitv:/media/bpiDrive/KERNEL$ sudo apt-get source linux-image-$(uname -r)
Reading package lists... Done
Building dependency tree       
Reading state information... Done
E: Unable to find a source package for linux-image-4.6.3-sunxi

Soooo now I'm stuck. I dunno what to do ):

This is waaaay above my current skillset.

 

Since I cant get it done myself, I really don't mind paying somebody who will has the skills to be able to do it. I dont see anything wrong with compensating them for their time/expertise.

 

How much would be reasonable for a kernel patching/recompile? USD10? USD20? I really have no idea what the going rate is, so I'm sorry if anybody takes offence to my offers. 


Anyways, thanks for all your time and reading my drivel. I tried to be as detailed as I could, and include any important details.  

 

you can build the kernel yourself with the buildsystem and add the patch in userspace/patches.

you can build the kernel yourself with the buildsystem and add the patch in userspace/patches.

This is really several degrees above my current linux skillset. I barely know how to compile something

Bump? Anybody?  Is there anywhere more appropriate I can go for help? 

I had to change the patch a bit, it did not cleanly aply. I put the binaries and patches on Google drive. I have no idea if it will even boot or break anything.

I had to change the patch a bit, it did not cleanly aply. I put the binaries and patches on Google drive. I have no idea if it will even boot or break anything.

Hey, thanks, but how would I apply the patch? I've read online that you need to have the kernel sources to patch the kernel, but when I try to get the sources, I get an error: 

bpi@bananapitv:/media/bpiDrive/KERNEL$ sudo apt-get source linux-image-$(uname -r)
Reading package lists... Done
Building dependency tree       
Reading state information... Done
E: Unable to find a source package for linux-image-4.6.3-sunxi

Thanks for your time  and helping me out !

I also compiled the necessary files. If you download them to a folder you can install them with dpkg -i -R folder.

Reboot and check if it works.

EDIT: Ignore, the USB port was plugged in loosly. I've plugged it in and am re-investigating. 

Hey, even with the patches applied, it doesnt seem to help much: 

bpi@bananapitv:~$ dmesg 
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.7.2-sunxi (root@armbianbuild) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) ) #1 SMP Thu Aug 25 19:10:36 CEST 2016
[    0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: LeMaker Banana Pi
[    0.000000] cma: Reserved 16 MiB at 0x7e800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 260119
[    0.000000] free_area_init_node: node 0, pgdat c0e9f200, node_mem_map ef701000
[    0.000000]   Normal zone: 1728 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 196608 pages, LIFO batch:31
[    0.000000]   HighMem zone: 63511 pages, LIFO batch:15
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: Using PSCI v0.1 Function IDs from DT
[    0.000000] percpu: Embedded 14 pages/cpu @ef6bd000 s27968 r8192 d21184 u57344
[    0.000000] pcpu-alloc: s27968 r8192 d21184 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 258391
[    0.000000] Kernel command line: console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 rootwait rootfstype=ext4 cgroup_enable=memory swapaccount=1 sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_no_mali_mem_reserve sunxi_fb_mem_reserve=16 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 enforcing=0 loglevel=1
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 995476K/1040476K available (9905K kernel code, 674K rwdata, 2240K rodata, 1024K init, 309K bss, 28616K reserved, 16384K cma-reserved, 237660K highmem)
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
    lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc0cdc4c8   (13138 kB)
      .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
      .data : 0xc0e00000 - 0xc0ea8b0c   ( 675 kB)
       .bss : 0xc0eaa000 - 0xc0ef7430   ( 310 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000023] Switching to timer-based delay loop, resolution 41ns
[    0.000599] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000872] clocksource: hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 12741736309 ns
[    0.001304] Console: colour dummy device 80x30
[    0.001464] console [tty1] enabled
[    0.001496] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.001513] pid_max: default: 32768 minimum: 301
[    0.001693] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001710] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002749] CPU: Testing write buffer coherency: ok
[    0.002816] ftrace: allocating 29867 entries in 88 pages
[    0.055009] /cpus/cpu@0 missing clock-frequency property
[    0.055050] /cpus/cpu@1 missing clock-frequency property
[    0.055066] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.055120] Setting up static identity map for 0x40100000 - 0x40100058
[    0.067770] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.067917] Brought up 2 CPUs
[    0.067940] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[    0.067948] CPU: All CPU(s) started in HYP mode.
[    0.067953] CPU: Virtualization extensions available.
[    0.069108] devtmpfs: initialized
[    0.085210] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[    0.085611] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.086471] xor: measuring software checksum speed
[    0.177683]    arm4regs  :  1227.600 MB/sec
[    0.277756]    8regs     :   710.400 MB/sec
[    0.377838]    32regs    :   726.000 MB/sec
[    0.477919]    neon      :  1141.200 MB/sec
[    0.477928] xor: using function: arm4regs (1227.600 MB/sec)
[    0.478093] pinctrl core: initialized pinctrl subsystem
[    0.479566] NET: Registered protocol family 16
[    0.480969] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.508041] cpuidle: using governor ladder
[    0.528133] cpuidle: using governor menu
[    0.537106] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.537128] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.708705] raid6: int32x1  gen()   142 MB/s
[    0.878649] raid6: int32x1  xor()   110 MB/s
[    1.048866] raid6: int32x2  gen()   189 MB/s
[    1.218841] raid6: int32x2  xor()   129 MB/s
[    1.388854] raid6: int32x4  gen()   180 MB/s
[    1.559069] raid6: int32x4  xor()   124 MB/s
[    1.729165] raid6: int32x8  gen()   182 MB/s
[    1.899513] raid6: int32x8  xor()   110 MB/s
[    2.069493] raid6: neonx1   gen()   437 MB/s
[    2.239522] raid6: neonx1   xor()   324 MB/s
[    2.409688] raid6: neonx2   gen()   578 MB/s
[    2.579820] raid6: neonx2   xor()   422 MB/s
[    2.749978] raid6: neonx4   gen()   705 MB/s
[    2.920049] raid6: neonx4   xor()   477 MB/s
[    3.090280] raid6: neonx8   gen()   644 MB/s
[    3.260324] raid6: neonx8   xor()   446 MB/s
[    3.260332] raid6: using algorithm neonx4 gen() 705 MB/s
[    3.260339] raid6: .... xor() 477 MB/s, rmw enabled
[    3.260346] raid6: using intx1 recovery algorithm
[    3.260726] reg-fixed-voltage usb0-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb0_vbus_pin@0, deferring probe
[    3.260789] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
[    3.260829] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
[    3.261746] reg-fixed-voltage gmac-3v3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/gmac_power_pin@0, deferring probe
[    3.263045] SCSI subsystem initialized
[    3.263392] libata version 3.00 loaded.
[    3.263753] usbcore: registered new interface driver usbfs
[    3.263830] usbcore: registered new interface driver hub
[    3.263940] usbcore: registered new device driver usb
[    3.264245] media: Linux media interface: v0.10
[    3.264309] Linux video capture interface: v2.00
[    3.264396] pps_core: LinuxPPS API ver. 1 registered
[    3.264405] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    3.264430] PTP clock support registered
[    3.266305] clocksource: Switched to clocksource arch_sys_counter
[    3.322046] VFS: Disk quotas dquot_6.6.0
[    3.322159] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    3.323294] simple-framebuffer 7f817000.framebuffer: framebuffer at 0x7f817000, 0x7e9000 bytes, mapped to 0xf0900000
[    3.323317] simple-framebuffer 7f817000.framebuffer: format=x8r8g8b8, mode=1920x1080x32, linelength=7680
[    3.360128] Console: switching to colour frame buffer device 240x67
[    3.395774] simple-framebuffer 7f817000.framebuffer: fb0: simplefb registered!
[    3.407050] NET: Registered protocol family 2
[    3.407901] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    3.408002] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    3.408135] TCP: Hash tables configured (established 8192 bind 8192)
[    3.408252] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    3.408319] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    3.408593] NET: Registered protocol family 1
[    3.409160] RPC: Registered named UNIX socket transport module.
[    3.409180] RPC: Registered udp transport module.
[    3.409187] RPC: Registered tcp transport module.
[    3.409194] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.409623] Trying to unpack rootfs image as initramfs...
[    3.697009] Freeing initrd memory: 3976K (c9c1e000 - ca000000)
[    3.697816] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    3.699224] futex hash table entries: 512 (order: 3, 32768 bytes)
[    3.699968] Initialise system trusted keyrings
[    3.700699] workingset: timestamp_bits=12 max_order=18 bucket_order=6
[    3.710812] zbud: loaded
[    3.714392] NFS: Registering the id_resolver key type
[    3.714470] Key type id_resolver registered
[    3.714479] Key type id_legacy registered
[    3.714498] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    3.714508] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    3.716176] JFS: nTxBlock = 7936, nTxLock = 63489
[    3.727800] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    3.737014] Key type asymmetric registered
[    3.737126] bounce: pool size: 64 pages
[    3.737496] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    3.737723] io scheduler noop registered
[    3.737738] io scheduler deadline registered
[    3.737807] io scheduler cfq registered (default)
[    3.738803] sun4i-usb-phy 1c13400.phy: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb0_id_detect_pin@0, deferring probe
[    3.742189] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    3.818181] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    3.821825] console [ttyS0] disabled
[    3.842047] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 45, base_baud = 1500000) is a U6_16550A
[    3.842585] console [ttyS0] enabled
[    3.866395] 1c28c00.serial: ttyS1 at MMIO 0x1c28c00 (irq = 46, base_baud = 1500000) is a U6_16550A
[    3.890195] 1c29c00.serial: ttyS2 at MMIO 0x1c29c00 (irq = 47, base_baud = 1500000) is a U6_16550A
[    3.895834] brd: module loaded
[    3.904850] loop: module loaded
[    3.966408] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
[    3.966476] ahci-sunxi 1c18000.sata: SSS flag set, parallel bus scan disabled
[    3.966512] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[    3.966529] ahci-sunxi 1c18000.sata: flags: ncq sntf stag pm led clo only pio slum part ccc 
[    3.968081] scsi host0: ahci-sunxi
[    3.968505] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 33
[    3.971663] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.971685] ehci-platform: EHCI generic platform driver
[    3.972068] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.972105] ohci-platform: OHCI generic platform driver
[    3.972528] usbcore: registered new interface driver usb-storage
[    3.973725] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
[    3.973744] sunxi-rtc 1c20d00.rtc: RTC enabled
[    3.973870] i2c /dev entries driver
[    3.975038] axp20x-i2c 0-0034: AXP20x variant AXP209 found
[    3.988388] input: axp20x-pek as /devices/platform/soc@01c00000/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input0
[    3.996440] axp20x-i2c 0-0034: Backup (RTC) battery charging is disabled
[    3.996676] axp20x-i2c 0-0034: AXP20X driver loaded
[    4.016582] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    4.018407] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[    4.056613] sunxi-mmc 1c0f000.mmc: base:0xf08fa000 irq:28
[    4.057598] ledtrig-cpu: registered to indicate activity on CPUs
[    4.057702] hidraw: raw HID events driver (C) Jiri Kosina
[    4.057904] usbcore: registered new interface driver usbhid
[    4.057913] usbhid: USB HID core driver
[    4.059074] Initializing XFRM netlink socket
[    4.060346] NET: Registered protocol family 10
[    4.061581] NET: Registered protocol family 17
[    4.061637] NET: Registered protocol family 15
[    4.061711] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    4.061782] 8021q: 802.1Q VLAN Support v1.8
[    4.061844] Key type dns_resolver registered
[    4.062271] Registering SWP/SWPB emulation handler
[    4.064287] registered taskstats version 1
[    4.064307] Loading compiled-in X.509 certificates
[    4.064413] zswap: loaded using pool lzo/zbud
[    4.067627] Btrfs loaded, crc32c=crc32c-generic
[    4.067646] BTRFS: selftest: sectorsize: 4096  nodesize: 4096
[    4.067653] BTRFS: selftest: sectorsize: 4096  nodesize: 8192
[    4.067660] BTRFS: selftest: sectorsize: 4096  nodesize: 16384
[    4.067667] BTRFS: selftest: sectorsize: 4096  nodesize: 32768
[    4.067674] BTRFS: selftest: sectorsize: 4096  nodesize: 65536
[    4.088797] Key type encrypted registered
[    4.115729] mmc0: host does not support reading read-only switch, assuming write-enable
[    4.119764] mmc0: new high speed SDHC card at address e624
[    4.120682] mmcblk0: mmc0:e624 SL08G 7.40 GiB 
[    4.122260]  mmcblk0: p1
[    4.196415] sun7i-dwmac 1c50000.ethernet: no reset control found
[    4.196442]  Ring mode enabled
[    4.196452]  DMA HW capability register supported
[    4.196460]  Normal descriptors
[    4.212432] libphy: stmmac: probed
[    4.212462] eth0: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[    4.212473] eth0: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[    4.213023] ehci-platform 1c14000.usb: EHCI Host Controller
[    4.213078] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
[    4.213436] ehci-platform 1c14000.usb: irq 30, io mem 0x01c14000
[    4.226349] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
[    4.226726] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.226745] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.226756] usb usb1: Product: EHCI Host Controller
[    4.226765] usb usb1: Manufacturer: Linux 4.7.2-sunxi ehci_hcd
[    4.226775] usb usb1: SerialNumber: 1c14000.usb
[    4.227757] hub 1-0:1.0: USB hub found
[    4.227841] hub 1-0:1.0: 1 port detected
[    4.228850] ehci-platform 1c1c000.usb: EHCI Host Controller
[    4.228905] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
[    4.229197] ehci-platform 1c1c000.usb: irq 34, io mem 0x01c1c000
[    4.246345] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[    4.246688] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    4.246703] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.246715] usb usb2: Product: EHCI Host Controller
[    4.246724] usb usb2: Manufacturer: Linux 4.7.2-sunxi ehci_hcd
[    4.246734] usb usb2: SerialNumber: 1c1c000.usb
[    4.247674] hub 2-0:1.0: USB hub found
[    4.247760] hub 2-0:1.0: 1 port detected
[    4.248755] ohci-platform 1c14400.usb: Generic Platform OHCI controller
[    4.248808] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
[    4.249071] ohci-platform 1c14400.usb: irq 31, io mem 0x01c14400
[    4.288138] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.288819] ata1.00: ATA-9: WDC WD7500BPVX-00JC3T0, 01.01A01, max UDMA/133
[    4.288832] ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    4.289543] ata1.00: configured for UDMA/133
[    4.290518] scsi 0:0:0:0: Direct-Access     ATA      WDC WD7500BPVX-0 1A01 PQ: 0 ANSI: 5
[    4.310662] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    4.310680] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.310692] usb usb3: Product: Generic Platform OHCI controller
[    4.310701] usb usb3: Manufacturer: Linux 4.7.2-sunxi ohci_hcd
[    4.310711] usb usb3: SerialNumber: 1c14400.usb
[    4.311686] hub 3-0:1.0: USB hub found
[    4.311778] hub 3-0:1.0: 1 port detected
[    4.312791] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[    4.312844] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
[    4.313111] ohci-platform 1c1c400.usb: irq 35, io mem 0x01c1c400
[    4.367571] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
[    4.367595] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    4.367906] sd 0:0:0:0: [sda] Write Protect is off
[    4.367923] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.368049] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.369365] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.370692] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    4.370710] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.370721] usb usb4: Product: Generic Platform OHCI controller
[    4.370731] usb usb4: Manufacturer: Linux 4.7.2-sunxi ohci_hcd
[    4.370741] usb usb4: SerialNumber: 1c1c400.usb
[    4.371625] hub 4-0:1.0: USB hub found
[    4.371717] hub 4-0:1.0: 1 port detected
[    4.372829] usb_phy_generic.0.auto supply vcc not found, using dummy regulator
[    4.373484] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    4.373512] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 5
[    4.373943] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    4.373967] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.373979] usb usb5: Product: MUSB HDRC host driver
[    4.373988] usb usb5: Manufacturer: Linux 4.7.2-sunxi musb-hcd
[    4.373998] usb usb5: SerialNumber: musb-hdrc.1.auto
[    4.374910] hub 5-0:1.0: USB hub found
[    4.374995] hub 5-0:1.0: 1 port detected
[    4.397043] of_cfs_init
[    4.397182] of_cfs_init: OK
[    4.403481] vcc3v0: disabling
[    4.403516] vcc5v0: disabling
[    4.404061] usb0-vbus: disabling
[    4.458843]  sda: sda1
[    4.460946] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.462283] Freeing unused kernel memory: 1024K (c0d00000 - c0e00000)
[    4.522659] systemd-udevd[146]: starting version 215
[    4.525532] random: systemd-udevd: uninitialized urandom read (16 bytes read, 17 bits of entropy available)
[    4.566485] usb 2-1: new high-speed USB device number 2 using ehci-platform
[    4.718895] usb 2-1: New USB device found, idVendor=1f4d, idProduct=3000
[    4.718922] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.718934] usb 2-1: Product: USB Stick
[    4.718944] usb 2-1: Manufacturer: Max
[    4.718953] usb 2-1: SerialNumber: 080116
[    5.711001] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
[    6.086589] random: systemd: uninitialized urandom read (16 bytes read, 42 bits of entropy available)
[    6.120980] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    6.121455] systemd[1]: Detected architecture 'arm'.
[    6.134380] systemd[1]: Set hostname to <bananapitv>.
[    6.240591] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 43 bits of entropy available)
[    6.331050] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 45 bits of entropy available)
[    6.349638] random: systemd: uninitialized urandom read (16 bytes read, 45 bits of entropy available)
[    6.350865] random: systemd: uninitialized urandom read (16 bytes read, 45 bits of entropy available)
[    6.352019] random: systemd: uninitialized urandom read (16 bytes read, 45 bits of entropy available)
[    6.372040] random: systemd: uninitialized urandom read (16 bytes read, 45 bits of entropy available)
[    6.372909] random: systemd: uninitialized urandom read (16 bytes read, 45 bits of entropy available)
[    6.373101] random: systemd: uninitialized urandom read (16 bytes read, 45 bits of entropy available)
[    6.581688] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    6.585269] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    6.585819] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.585935] systemd[1]: Expecting device dev-ttyS0.device...
[    6.586819] systemd[1]: Starting Remote File Systems (Pre).
[    6.587413] systemd[1]: Reached target Remote File Systems (Pre).
[    6.587642] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    6.587981] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.588071] systemd[1]: Starting Paths.
[    6.588607] systemd[1]: Reached target Paths.
[    6.588698] systemd[1]: Starting Encrypted Volumes.
[    6.589190] systemd[1]: Reached target Encrypted Volumes.
[    6.589391] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    6.590737] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.590873] systemd[1]: Expecting device dev-disk-by\x2duuid-19adc0b3\x2d75fb\x2d4b42\x2daf6a\x2dc5b95fbf592c.device...
[    6.591525] systemd[1]: Starting Root Slice.
[    6.592120] systemd[1]: Created slice Root Slice.
[    6.592216] systemd[1]: Starting User and Session Slice.
[    6.592998] systemd[1]: Created slice User and Session Slice.
[    6.593098] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    6.593894] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.593988] systemd[1]: Starting Delayed Shutdown Socket.
[    6.594667] systemd[1]: Listening on Delayed Shutdown Socket.
[    6.594766] systemd[1]: Starting Journal Socket (/dev/log).
[    6.595544] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.595693] systemd[1]: Starting udev Control Socket.
[    6.596428] systemd[1]: Listening on udev Control Socket.
[    6.596568] systemd[1]: Starting udev Kernel Socket.
[    6.597221] systemd[1]: Listening on udev Kernel Socket.
[    6.597370] systemd[1]: Starting Journal Socket.
[    6.598107] systemd[1]: Listening on Journal Socket.
[    6.598339] systemd[1]: Starting System Slice.
[    6.599219] systemd[1]: Created slice System Slice.
[    6.599407] systemd[1]: Started File System Check on Root Device.
[    6.599475] systemd[1]: Starting system-systemd\x2dfsck.slice.
[    6.600473] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    6.600585] systemd[1]: Starting system-serial\x2dgetty.slice.
[    6.601489] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    6.601588] systemd[1]: Starting system-getty.slice.
[    6.602424] systemd[1]: Created slice system-getty.slice.
[    6.602656] systemd[1]: Starting Increase datagram queue length...
[    6.627425] systemd[1]: Starting Restore / save the current clock...
[    6.641049] systemd[1]: Mounting Debug File System...
[    6.647078] systemd[1]: Mounted Huge Pages File System.
[    6.647410] systemd[1]: Starting udev Coldplug all Devices...
[    6.680034] systemd[1]: Started Set Up Additional Binary Formats.
[    6.680763] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.685619] systemd[1]: Mounting POSIX Message Queue File System...
[    6.722490] systemd[1]: Starting Load Kernel Modules...
[    6.727953] systemd[1]: Starting LSB: Set keymap...
[    6.738054] systemd[1]: Starting Slices.
[    6.761831] systemd[1]: Reached target Slices.
[    6.768257] systemd[1]: Mounted POSIX Message Queue File System.
[    6.769366] systemd[1]: Mounted Debug File System.
[    6.772244] systemd[1]: Started Increase datagram queue length.
[    6.795667] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    6.800064] systemd[1]: Started Restore / save the current clock.
[    6.804161] systemd[1]: Started LSB: Set keymap.
[    6.808804] fuse init (API version 7.25)
[    6.823030] systemd[1]: Time has been changed
[    6.939461] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[    6.959636] systemd[1]: Started Load Kernel Modules.
[    6.962462] systemd[1]: Started udev Coldplug all Devices.
[    6.979813] systemd[1]: Mounting Configuration File System...
[    7.017064] systemd[1]: Mounting FUSE Control File System...
[    7.021616] systemd[1]: Starting Apply Kernel Variables...
[    7.027645] systemd[1]: Starting Create Static Device Nodes in /dev...
[    7.040107] systemd[1]: Starting Syslog Socket.
[    7.045485] systemd[1]: Listening on Syslog Socket.
[    7.046041] systemd[1]: Starting Journal Service...
[    7.056003] systemd[1]: Started Journal Service.
[    7.234947] systemd-udevd[243]: starting version 215
[    7.747809] sun4i-ss 1c15000.crypto-engine: no reset control found
[    7.749504] sun4i-ss 1c15000.crypto-engine: Die ID 0
[    7.929816] Registered IR keymap rc-empty
[    7.930340] input: sunxi-ir as /devices/platform/soc@01c00000/1c21800.ir/rc/rc0/input1
[    7.930390] rc rc0: sunxi-ir as /devices/platform/soc@01c00000/1c21800.ir/rc/rc0
[    7.955759] sunxi-ir 1c21800.ir: initialized sunXi IR driver
[    7.971853] lirc_dev: IR Remote Control driver registered, major 245 
[    7.996531] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-ir) registered at minor = 0
[    7.996561] IR LIRC bridge handler initialized
[    8.018431] dw2102: su3000_identify_state

[    8.018437] dvb-usb: found a 'SU3000HD DVB-S USB2.0' in warm state.
[    8.018455] dw2102: su3000_power_ctrl: 1, initialized 0

[    8.024363] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[    8.025167] DVB: registering new adapter (SU3000HD DVB-S USB2.0)
[    8.037848] dvb-usb: MAC address: 00:af:78:66:2b:cf
[    8.105970] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok
[    8.405611] DS3000 chip version: 0.208 attached.
[    8.408046] 	Chip ID = [DS3103]!
[    8.409444] dw2102: Attached DS3000/TS2020!

[    8.409495] usb 2-1: DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...
[    8.480250] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
[    8.486900] Registered IR keymap rc-su3000
[    8.487504] input: IR-receiver inside an USB DVB receiver as /devices/platform/soc@01c00000/1c1c000.usb/usb2/2-1/rc/rc1/input2
[    8.489034] rc rc1: IR-receiver inside an USB DVB receiver as /devices/platform/soc@01c00000/1c1c000.usb/usb2/2-1/rc/rc1
[    8.489070] dvb-usb: schedule remote query interval to 150 msecs.
[    8.489089] dw2102: su3000_power_ctrl: 0, initialized 1

[    8.489098] dvb-usb: SU3000HD DVB-S USB2.0 successfully initialized and connected.
[    8.489313] usbcore: registered new interface driver dw2102
[    8.923584] Adding 131068k swap on /var/swap.  Priority:-1 extents:1 across:131068k SSFS
[   10.250064] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   10.493930] systemd-journald[239]: Received request to flush runtime journal from PID 1
[   11.008489]  RX IPC Checksum Offload disabled
[   11.008516]  No MAC Management Counters available
[   11.008841] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.411847] random: nonblocking pool is initialized
[   13.661720] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   13.663028] NFSD: starting 90-second grace period (net c0e93880)
[   17.006786] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   17.006875] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   18.043027] dw2102: su3000_power_ctrl: 1, initialized 1

[   18.100871] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3103.fw)...
[   18.100897] ds3000_firmware_ondemand: Waiting for firmware upload(2)...
[   19.172644] usb 2-1: DVB: adapter 0 frontend 0 frequency 0 out of range (950000..2150000)
[   19.175611] dw2102: su3000_power_ctrl: 0, initialized 1

[   19.183924] dw2102: su3000_power_ctrl: 1, initialized 1

[   19.252152] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3103.fw)...
[   19.252193] ds3000_firmware_ondemand: Waiting for firmware upload(2)...

bpi@bananapitv:~$ ls /lib/firmware/ | grep "dvb-"
dvb-demod-m88ds3103.fw
dvb-demod-mn88472-02.fw
dvb-fe-ds3000.fw
dvb-fe-ds3103.fw
dvb-fe-xc4000-1.4.1.fw
dvb-fe-xc5000-1.6.114.fw
dvb-fe-xc5000c-4.1.30.7.fw
dvb-usb-dib0700-1.20.fw
dvb-usb-dw2102.fw
dvb-usb-it9135-01.fw
dvb-usb-it9135-02.fw
dvb-usb-tbs5520.fw
dvb-usb-terratec-h5-drxk.fw

It could be that the firmware is different.

the md5sum from the firmware in this openelec is 2c12c1931ead080490e91bbc181aa285.

I don't own this card so I can not test myself.

 

PS armbian used the sources from kernel.org

EDIT: Ignore, the USB port was plugged in loosly. I've plugged it in and am re-investigating. 

 

Did you get it working? It might be worth looking at this.