Skip to content
View in the app

A better way to browse. Learn more.
Armbian Community Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

boot hangs

s0m3body
in Allwinner sunxi

Featured Replies

Hi,

I'm watching a problem during boot of my A20-OLinuXino-MICRO-4GB, running 4.6.3-sunxi #7 SMP Tue Jul 5 16:23:41 CEST 2016 armv7l GNU/Linux It seems to hang an multiple points and needs 417 seconds at all.

It looks like a problem with initializing /dev/random and network configuration

 

Here the entire log:

Aug 30 00:23:49 autokino kernel: [    7.624658] rt2800usb 1-1:1.0 wlan0: renamed from rename4
Aug 30 00:23:49 autokino kernel: [    8.917512] random: mktemp urandom read with 96 bits of entropy available
Aug 30 00:23:49 autokino kernel: [    9.142494] EXT4-fs (mmcblk0p1): re-mounted. Opts: data=writeback,commit=600,errors=remount-ro
Aug 30 00:23:49 autokino kernel: [    9.540278] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
Aug 30 00:23:49 autokino kernel: [   11.831662] Adding 131068k swap on /var/swap.  Priority:-1 extents:2 across:139260k SSFS
Aug 30 00:23:49 autokino kernel: [   12.267136] BTRFS info (device sda1): disk space caching is enabled
Aug 30 00:23:49 autokino kernel: [   14.295623]  RX IPC Checksum Offload disabled
Aug 30 00:23:49 autokino kernel: [   14.295665]  No MAC Management Counters available
Aug 30 00:23:49 autokino kernel: [   14.296059] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Aug 30 00:23:49 autokino kernel: [   16.353295] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
Aug 30 00:23:49 autokino kernel: [   16.353406] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Aug 30 00:23:49 autokino kernel: [   36.360978] random: nonblocking pool is initialized
Aug 30 00:23:49 autokino kernel: [  150.328053] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
Aug 30 00:23:49 autokino kernel: [  150.329706] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.33
Aug 30 00:23:49 autokino kernel: [  150.650190] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Aug 30 00:23:49 autokino kernel: [  152.431899] wlan0: authenticate with 5c:49:79:21:2b:d3
Aug 30 00:23:49 autokino kernel: [  152.494813] wlan0: send auth to 5c:49:79:21:2b:d3 (try 1/3)
Aug 30 00:23:49 autokino kernel: [  152.498227] wlan0: authenticated
Aug 30 00:23:49 autokino kernel: [  152.503090] wlan0: associate with 5c:49:79:21:2b:d3 (try 1/3)
Aug 30 00:23:49 autokino kernel: [  152.530590] wlan0: RX AssocResp from 5c:49:79:21:2b:d3 (capab=0x431 status=0 aid=1)
Aug 30 00:23:49 autokino kernel: [  152.543793] wlan0: associated
Aug 30 00:23:49 autokino kernel: [  152.544084] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Aug 30 00:23:49 autokino kernel: [  285.154641] rtl8192cu: MAC auto ON okay!
Aug 30 00:23:49 autokino kernel: [  285.187781] rtl8192cu: Tx queue select: 0x05
Aug 30 00:23:49 autokino kernel: [  285.674737] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Aug 30 00:23:49 autokino acpid: starting up with netlink and the input layer
Aug 30 00:23:49 autokino acpid: 1 rule loaded
Aug 30 00:23:49 autokino acpid: 1 rule loaded
Aug 30 00:23:49 autokino acpid: waiting for events: event logging is off
Aug 30 00:23:49 autokino named[7001]: starting BIND 9.8.4-rpz2+rl005.12-P1 -u bind
Aug 30 00:23:49 autokino named[7001]: built with '--prefix=/usr' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--sysconfdir=/etc/bind' '--localstatedir=/var' '--enable-threads' '--enable-largefile' '--with-libtool' '--enable-shared' '--enable-static' '--with-openssl=/usr' '--with-gssapi=/usr' '--with-gnu-ld' '--with-geoip=/usr' '--enable-ipv6' 'CFLAGS=-fno-strict-aliasing -DDIG_SIGCHASE -O2'
Aug 30 00:23:49 autokino named[7001]: ----------------------------------------------------
Aug 30 00:23:49 autokino named[7001]: BIND 9 is maintained by Internet Systems Consortium,
Aug 30 00:23:49 autokino named[7001]: Inc. (ISC), a non-profit 501©(3) public-benefit
Aug 30 00:23:49 autokino named[7001]: corporation.  Support and training for BIND 9 are
Aug 30 00:23:49 autokino named[7001]: available at https://www.isc.org/support
Aug 30 00:23:49 autokino named[7001]: ----------------------------------------------------
Aug 30 00:23:49 autokino named[7001]: adjusted limit on open files from 4096 to 1048576
Aug 30 00:23:49 autokino named[7001]: found 2 CPUs, using 2 worker threads
Aug 30 00:23:49 autokino named[7001]: using up to 4096 sockets
Aug 30 00:23:49 autokino named[7001]: loading configuration from '/etc/bind/named.conf'
Aug 30 00:23:49 autokino named[7001]: reading built-in trusted keys from file '/etc/bind/bind.keys'
Aug 30 00:23:49 autokino named[7001]: using default UDP/IPv4 port range: [1024, 65535]
Aug 30 00:23:49 autokino named[7001]: using default UDP/IPv6 port range: [1024, 65535]
Aug 30 00:23:49 autokino named[7001]: listening on IPv6 interfaces, port 53
Aug 30 00:23:49 autokino haveged: haveged starting up
Aug 30 00:23:49 autokino named[7001]: listening on IPv4 interface lo, 127.0.0.1#53
Aug 30 00:23:49 autokino named[7001]: listening on IPv4 interface eth0, 192.168.178.29#53
Aug 30 00:23:49 autokino named[7001]: listening on IPv4 interface wlan1, 192.168.27.1#53
Aug 30 00:23:49 autokino named[7001]: listening on IPv4 interface wlan0, 192.168.178.30#53
Aug 30 00:23:49 autokino named[7001]: generating session key for dynamic DNS
Aug 30 00:23:50 autokino named[7001]: sizing zone task pool based on 7 zones
Aug 30 00:23:50 autokino named[7001]: set up managed keys zone for view _default, file 'managed-keys.bind'
Aug 30 00:23:50 autokino named[7001]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
Aug 30 00:23:50 autokino named[7001]: automatic empty zone: 254.169.IN-ADDR.ARPA
Aug 30 00:23:50 autokino named[7001]: automatic empty zone: 2.0.192.IN-ADDR.ARPA
Aug 30 00:23:50 autokino named[7001]: automatic empty zone: 100.51.198.IN-ADDR.ARPA
Aug 30 00:23:50 autokino named[7001]: automatic empty zone: 113.0.203.IN-ADDR.ARPA
Aug 30 00:23:50 autokino named[7001]: automatic empty zone: 255.255.255.255.IN-ADDR.ARPA
Aug 30 00:23:50 autokino named[7001]: automatic empty zone: 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA
Aug 30 00:23:50 autokino named[7001]: automatic empty zone: 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA
Aug 30 00:23:50 autokino named[7001]: automatic empty zone: D.F.IP6.ARPA
Aug 30 00:23:50 autokino named[7001]: automatic empty zone: 8.E.F.IP6.ARPA
Aug 30 00:23:50 autokino named[7001]: automatic empty zone: 9.E.F.IP6.ARPA
Aug 30 00:23:50 autokino named[7001]: automatic empty zone: A.E.F.IP6.ARPA
Aug 30 00:23:50 autokino named[7001]: automatic empty zone: B.E.F.IP6.ARPA
Aug 30 00:23:50 autokino named[7001]: automatic empty zone: 8.B.D.0.1.0.0.2.IP6.ARPA
Aug 30 00:23:50 autokino named[7001]: command channel listening on 127.0.0.1#953
Aug 30 00:23:50 autokino named[7001]: command channel listening on ::1#953
Aug 30 00:23:50 autokino named[7001]: zone 0.in-addr.arpa/IN: loaded serial 1
Aug 30 00:23:50 autokino named[7001]: zone 127.in-addr.arpa/IN: loaded serial 1
Aug 30 00:23:50 autokino named[7001]: zone 27.168.192.in-addr.arpa/IN: loaded serial 15060902
Aug 30 00:23:50 autokino named[7001]: zone 255.in-addr.arpa/IN: loaded serial 1
Aug 30 00:23:50 autokino named[7001]: /etc/bind/db.autokino.fritz.box:13: ignoring out-of-zone data (ns1.fritz.box)
Aug 30 00:23:50 autokino named[7001]: zone autokino.fritz.box/IN: loaded serial 3
Aug 30 00:23:50 autokino named[7001]: zone localhost/IN: loaded serial 2
Aug 30 00:23:50 autokino named[7001]: managed-keys-zone ./IN: loaded serial 33
Aug 30 00:23:50 autokino named[7001]: zone 27.168.192.in-addr.arpa/IN: sending notifies (serial 15060902)
Aug 30 00:23:50 autokino bluetoothd[7057]: Bluetooth daemon 4.99
Aug 30 00:23:50 autokino bluetoothd[7057]: Starting SDP server
Aug 30 00:23:50 autokino kernel: [  417.282361] Bluetooth: Core ver 2.21
Aug 30 00:23:50 autokino kernel: [  417.282537] NET: Registered protocol family 31
Aug 30 00:23:50 autokino kernel: [  417.282548] Bluetooth: HCI device and connection manager initialized
Aug 30 00:23:50 autokino kernel: [  417.282579] Bluetooth: HCI socket layer initialized
Aug 30 00:23:50 autokino kernel: [  417.282599] Bluetooth: L2CAP socket layer initialized
Aug 30 00:23:50 autokino kernel: [  417.282667] Bluetooth: SCO socket layer initialized
Aug 30 00:23:50 autokino bluetoothd[7057]: Failed to init alert plugin
Aug 30 00:23:50 autokino bluetoothd[7057]: Failed to init time plugin
Aug 30 00:23:50 autokino bluetoothd[7057]: Failed to init gatt_example plugin
Aug 30 00:23:50 autokino kernel: [  417.333333] Bluetooth: RFCOMM TTY layer initialized
Aug 30 00:23:50 autokino kernel: [  417.333399] Bluetooth: RFCOMM socket layer initialized
Aug 30 00:23:50 autokino kernel: [  417.333446] Bluetooth: RFCOMM ver 1.11
Aug 30 00:23:50 autokino kernel: [  417.336358] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Aug 30 00:23:50 autokino kernel: [  417.336387] Bluetooth: BNEP filters: protocol multicast
Aug 30 00:23:50 autokino kernel: [  417.336421] Bluetooth: BNEP socket layer initialized
 

Do you have an idea what I can do to get it a little bit faster? I've no problem with an insecure initialized /dev/random.

 

Thanks for any suggestions.

Bye

Guest
This topic is now closed to further replies.
Go to topic listing

Account

Navigation

Search

Search

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.