It was set to mount cifs in fstab, but seem not automatically mount. Since this is not supported?

 

Please provide your /etc/fstab file.

Are you sure the  network connexion is properly established when the automounting is started.

 

 

sorry. Did not seem to be displayed properly when once not the access to the folder.

Even if the df -h immediately after login, was Michigae because looked like not mounted.

Again, provide your /etc/fstab, otherwise we can't point you at the syntax error.

Also, tell us which Armbian version are you using.

Hi, am trying Lubuntu desktop on Orange Pi Zero, that I downloaded from:
http://www.orangepi.org/downloadresources/

I tried to set the ram disk mounting in the /etc/fstab to existing directory /home/orangepi/ramdisk.

/etc/fstab:

tmpfs       /home/orangepi/ramdisk tmpfs   nodev,nosuid,exec,nodiratime,size=50M   0 0

 

 

and system doesn't boot:
[    2.607697] cmdline,disp=
[    2.611103] [DISP] disp_init_tv,line:540:screen 0 do not support TV TYPE!
[    2.611126] [DISP] bsp_disp_tv_register,line:946:'ptv is null
[    2.625218] sunxi-rtc sunxi-rtc: setting system clock to 1970-01-01 00:00:08 UTC (8)
[    2.633968] ths_fetch_sysconfig_para: type err  device_used = 1.
[    2.642459] CPU Budget:Register notifier
[    2.646832] CPU Budget:register Success
[    2.651145] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
[    2.666021] ALSA device list:
[    2.669332]   #0: audiocodec
[    2.672605]   #1: sndhdmi
[    2.675791] Waiting for root device /dev/mmcblk0p2...
[    3.200072] [DISP] disp_hdmi_set_detect,line:405:hdmi0's mgr is NULL
[    3.837287] *******************Try sdio*******************
[    3.844283] mmc0: req failed (CMD5): -110, retrying...
[    3.850869] mmc0: req failed (CMD5): -110, retrying...
[    3.857440] mmc0: req failed (CMD5): -110, retrying...
[    3.864031] *******************Try sd *******************
[    3.939048] mmc0: new high speed SDHC card at address aaaa
[    3.945778] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
[    3.955734]  mmcblk0: p1 p2
[    3.959683] *******************sd init ok*******************
[    4.045197] EXT4-fs (mmcblk0p2): recovery complete
[    4.054438] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    4.063518] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    4.074755] devtmpfs: mounted
[    4.078433] Freeing init memory: 324K
[    4.552821] init: plymouth-upstart-bridge main process (96) terminated with status 1
[    4.561673] init: plymouth-upstart-bridge main process ended, respawning
[    4.601867] init: plymouth-upstart-bridge main process (106) terminated with status 1
[    4.610880] init: plymouth-upstart-bridge main process ended, respawning
[    4.639058] init: plymouth-upstart-bridge main process (109) terminated with status 1
[    4.648032] init: plymouth-upstart-bridge main process ended, respawning
[    4.687652] init: plymouth-upstart-bridge main process (111) terminated with status 1
[    4.696556] init: plymouth-upstart-bridge main process ended, respawning
[    4.705364] init: ureadahead main process (99) terminated with status 5
 

Thank you in advance.

Edited May 6, 20188 yr by tarbal

The format of your command in /etc/fstab looks fine. Did you make sure that the /home/orangepi/ramdisk directory exists for mounting?

 

You could have done a 'sudo mount /home/orangepi/ramdisk' after making the changes to /etc/fstab,  and hopefully got a reaonsable error message then, instead of at boot time. And just a quick FYI, this isn't the OrangePi support forum! :-P

 

Oh sorry!
I found the Orange Pi forum. I believe so
The directory exists, I succeed mounting it manually.

 

The same setting /etc/fstab of Nano Pi NEO Ubuntu operates fine.
Thank you for help.