Skip to content
View in the app

A better way to browse. Learn more.

Armbian Community Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

CIFS mount is failed on 5.23

Featured Replies

Hello!

 

I have faced with following issue on CubieBoard. After upgrade from 5.11 to 5.23 I can't mount cifs remote drive (Apple Time Capsule). There is only one log in syslog during mount attempt.

sun4i-ss 1c15000.crypto-engine: ERROR: Empty IV

Is it known issue?

or try putting

blacklist sun4i_ss

into 

 

/etc/modprobe.d/sun4i.conf

  • Author

Hello!

 

I have tested @gTS2 solution. Cifs mount works fine with sun4i_ss in blacklist. What I miss with this option?

 

@Igor, I will test daily and dev kernels later.

  • Author

Hi, Igor!

 

I have tested 4.9.0 kernel on my Cubieboard (A10, Debian jessie). The same issue:

root@cubieboard:~# mount.cifs //10.0.1.1/Data /mnt/cifs -o sec=ntlm
Password for root@//10.0.1.1/Data:  ********
mount error(22): Invalid argument
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)
root@cubieboard:~# uname -a
Linux cubieboard 4.9.0-sunxi #6 SMP Sun Oct 23 16:00:06 CEST 2016 armv7l GNU/Linux
root@cubieboard:~# tail /var/log/messages
Nov  1 21:50:32 localhost kernel: [   47.234972] vdd-cpu: ramp_delay not set
Nov  1 21:50:32 localhost kernel: [   47.485529] vdd-cpu: ramp_delay not set
Nov  1 21:50:32 localhost kernel: [   47.785429] vdd-cpu: ramp_delay not set
Nov  1 21:50:42 localhost kernel: [   57.796352] vdd-cpu: ramp_delay not set
Nov  1 21:50:43 localhost kernel: [   58.355434] vdd-cpu: ramp_delay not set
Nov  1 21:50:49 localhost kernel: [   64.115095] vdd-cpu: ramp_delay not set
Nov  1 21:50:49 localhost kernel: [   64.595420] vdd-cpu: ramp_delay not set
Nov  1 21:50:55 localhost kernel: [   71.020496] Key type cifs.idmap registered
Nov  1 21:50:55 localhost kernel: [   71.026614] vdd-cpu: ramp_delay not set
Nov  1 21:50:56 localhost kernel: [   71.785428] vdd-cpu: ramp_delay not set
root@cubieboard:~# tail /var/log/syslog
Nov  1 21:50:32 localhost kernel: [   47.485529] vdd-cpu: ramp_delay not set
Nov  1 21:50:32 localhost kernel: [   47.785429] vdd-cpu: ramp_delay not set
Nov  1 21:50:42 localhost kernel: [   57.796352] vdd-cpu: ramp_delay not set
Nov  1 21:50:43 localhost kernel: [   58.355434] vdd-cpu: ramp_delay not set
Nov  1 21:50:49 localhost kernel: [   64.115095] vdd-cpu: ramp_delay not set
Nov  1 21:50:49 localhost kernel: [   64.595420] vdd-cpu: ramp_delay not set
Nov  1 21:50:55 localhost kernel: [   71.020496] Key type cifs.idmap registered
Nov  1 21:50:55 localhost kernel: [   71.026614] vdd-cpu: ramp_delay not set
Nov  1 21:50:55 localhost kernel: [   71.030719] sun4i-ss 1c15000.crypto-engine: ERROR: Empty IV
Nov  1 21:50:56 localhost kernel: [   71.785428] vdd-cpu: ramp_delay not set

Also I have tried to downgrade to 3.4 kernel. But I received unbootable image. Board just switch off after "Starting kernel". The same issue after clean install 5.20 with legacy 3.4 kernel.

 

It seems module blacklist is the only option now.

I think as a new bug on the allwinner security system sun4i-ss kernel module (maybe new version in armbian) or something changed on the armbian kernel that conflicts with this module.

 

I have come to the same problem with ecryptfs, which internally uses ss.

sun4i-ss 1c15000.crypto-engine: ERROR: Empty IV

 

I have tested the same solution (blacklisting module) and it works. You just lose hardware acceleration (=slower)

hello i have a same problem, 

 

mount.cifs //192.168.1.10/Elements /media/elements/

Password for root@//192.168.1.10/Elements:  

mount error(22): Invalid argument

Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)

 

uname -a

Linux bananapi 4.8.4-sunxi #6 SMP Sun Oct 23 15:55:47 CEST 2016 armv7l armv7l armv7l GNU/Linux

 

 

how can fix problem??

 

thx

Guest
This topic is now closed to further replies.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.