June 1, 20233 yr Hi! I am trying to use Armbian 23.5 Jammy XFCE for new Orange Pi Zero Plus 2. I have TTL-USB connection through Serial port. In pyutty window i see log U-Boot SPL 2022.07-armbian (May 27 2023 - 19:28:04 +0000) DRAM: 512 MiB Trying to boot from MMC1 U-Boot 2022.07-armbian (May 27 2023 - 19:28:04 +0000) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi Zero Plus 2 DRAM: 512 MiB Core: 65 devices, 18 uclasses, devicetree: separate WDT: Not starting watchdog@1c20ca0 MMC: mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1 Loading Environment from FAT... Unable to use mmc 0:1... In: serial Out: serial Err: serial Net: No ethernet found. ** Reading file would overwrite reserved memory ** Failed to load '/boot/boot.bmp' There is no valid bmp file at the given address starting USB... Bus usb@1c1b000: USB EHCI 1.00 Bus usb@1c1c000: USB EHCI 1.00 Bus usb@1c1d000: USB EHCI 1.00 scanning bus usb@1c1b000 for devices... 1 USB Device(s) found scanning bus usb@1c1c000 for devices... 1 USB Device(s) found scanning bus usb@1c1d000 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Autoboot in 1 seconds, press <Space> to stop switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 4121 bytes read in 4 ms (1005.9 KiB/s) ## Executing script at 43100000 U-boot loaded from SD Boot script loaded from mmc 180 bytes read in 3 ms (58.6 KiB/s) 16682525 bytes read in 693 ms (23 MiB/s) 8477464 bytes read in 355 ms (22.8 MiB/s) Found mainline kernel configuration 33498 bytes read in 10 ms (3.2 MiB/s) 504 bytes read in 6 ms (82 KiB/s) Applying kernel provided DT overlay sun8i-h3-usbhost2.dtbo 504 bytes read in 6 ms (82 KiB/s) Applying kernel provided DT overlay sun8i-h3-usbhost3.dtbo 4185 bytes read in 6 ms (680.7 KiB/s) Applying kernel provided DT fixup script (sun8i-h3-fixup.scr) ## Executing script at 45000000 Kernel image @ 0x42000000 [ 0x000000 - 0x815b18 ] ## Loading init Ramdisk from Legacy Image at 43400000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 16682461 Bytes = 15.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Ramdisk to 49017000, end 49fffddd ... OK Loading Device Tree to 48fa6000, end 49016fff ... OK Starting kernel ... and this is all. My orange can not boot propertly. Is it possible to do something? Other image... Please help!
June 1, 20233 yr Edit /boot/armbianEnv.txt and bump verbosity to 7 Also you can dig archives for older images and try those.
June 2, 20233 yr Author Thank you for answer. Is it possible to edit img file in Windows? I dont have linux now.
June 2, 20233 yr Author I have installed linux and try to edit armbianEnv.txt, but filesystem is read only. How to do it in img file. Thanks for your answers!
June 2, 20233 yr 2 hours ago, gonzales said: but filesystem is read only Fix your setup. Armbian does not write-protect this file. Anyway you can probably stop debugging on your side: https://armbian.atlassian.net/browse/AR-1764
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.