May i ask about support for Khadas vim3l?

2 hours ago, jaffac said:

May i ask about support for Khadas vim3l?

We support VIM3L, just download page was disabled by mistake. Enabled now https://www.armbian.com/khadas-vim3l/

Thank you Igor.

I just tried 4. or 5. versions for kvim3l. On start is always same message.

 

"Gave up waiting for root file system device. Common problems: Boot args (cat /proc/cndline)

Check rootdelay= (did the system wait long enough?) Missing modules (cat /proc/modules: ls /deu)

ALERT! UUID=fb208f7b-bf5e-4f42-a9c1-3c0111c20c?? does not exist. Dropping to a shell! (initramfs)_"

This is actualy on 5.19.17 old 22.11

But on 23.5.1 is almost the same. Goes to shell

(initramfs)_

On 6/11/2023 at 2:56 PM, jaffac said:

But on 23.5.1 is almost the same. Goes to shell

That is strange. Can you tell which image exactly you are trying?

It was supported 23.5 desktop and server. And some old archived versions. Maybe is something with my power source or something. Then i use whoohoho or rescue to go back and install coreelec. When Armbian get in whohoho and automatic instalation..

that will be nice.

@jaffac 

 

Works for me, logs: https://paste.armbian.com/feyuxegepo

 

 _  ___               _            __     _____ __  __ _____ _     
| |/ / |__   __ _  __| | __ _ ___  \ \   / /_ _|  \/  |___ /| |    
| ' /| '_ \ / _` |/ _` |/ _` / __|  \ \ / / | || |\/| | |_ \| |    
| . \| | | | (_| | (_| | (_| \__ \   \ V /  | || |  | |___) | |___ 
|_|\_\_| |_|\__,_|\__,_|\__,_|___/    \_/  |___|_|  |_|____/|_____|
                                                                   
Welcome to Armbian 23.05.1 Jammy with Linux 6.1.30-meson64

System load:   40%           	Up time:       2 min	Local users:   2            	
Memory usage:  31% of 1.90G  	IP:	       10.0.10.236
CPU temp:      59°C           	Usage of /:    38% of 15G    	
RX today:      35.6 KiB  

 

Installation:

• Download Khadas Rescue system (flash to SD card, insert, power on, hold FUNCTION and short press RESET button)
• Download Armbian image and place it to the USB drive (copy .xz or .img file, do not flash with Etcher)
• Boot into Khadas OOWOW and install to eMMC by selecting image from USB drive

This will soon be simplified as we are going to get into OOWOW.

Igor u are the BOSS! Thanks again.