Hello,

 

I installed Armbian/(debian jessie) on my Orange Pi Plus (EMMC). Works good, but i can't find the temp of the processor. (lm-sensors don't work/can't detect sensors)

 

What should i do?

 

 

sudo armbianmonitor -m

or '-r': http://www.cnx-software.com/2016/03/17/rpi-monitor-is-a-web-based-remote-monitor-for-arm-development-boards-such-as-raspberry-pi-and-orange-pi/

Thnx!

 

Great, my fan works really wel.. :-)

my fan works really wel.. :-)

 

Just for the general public (others who stumble accross this thread by accident ): In case you don't want to run heavy loads permanently with Armbian and H3 boards no fan is needed. If you want to run heavy stuff choose a good heatsink instead. Only a fan is a waste of ressources, only combined with a heatsink a fan starts to make some sense (but useless anyway since Plus, Plus 2 or Plus 2E are known to survive even heavy loads with heatsink without slowing down -- no throttling)

Just so you (who ever reads this) know:

 

I have my OPI+ running at 100% all the time (gov: performance). Installed a fan. Fan did not cool the  cpu much. Installed 3 little heatsinks. Max temp dropped 25  degrees celsius (with the fan blowing of course). (at 100% load / performace the cpu-temp = 50 degrees celsius, in my case)

 

I am just fooling around with the OPI+ and armbian. Still looking for a "better" OS. (hope DietPi will get a dev sample board and will make an image for the Orange Pi+)

I am just fooling around with the OPI+ and armbian. Still looking for a "better" OS. (hope DietPi will get a dev sample board and will make an image for the Orange Pi+)

 

When you find a better one, please drop as a note. We would really like to improve Armbian. The only other second option is (will be!) armbian (or some other well supported OS) with kernel 4.9+, when ready. Since alternative is not yet polished, you can only fry the board by using it at full load ...

 

BTW. DietPi uses Armbian as a base.