USB-touchscreen doesn't work with Cubietruck 3.4.113.

The touchscreen well works with versions 4.9.xxx, but doesn't work with 3.4.xxx.

I connected the monitor 1920*1080 and a touchscreen to Cubietruck.

Cubietruck smartly works in video browse mode, but the mouse and the keypad aren't always convenient for control.

Especially at night, too loud clicks. 

I pasted a touchscreen on the monitor.

It works with versions 4.xxx, but video doesn't work. And with versions 3.xxx on the contrary.

What I should make that the touchscreen worked with version 3.4.113?

Try to provide as much information as possible regarding display, otherwise is hard / impossible to provide any help.

Linux cubietruck 3.4.113-sun7i version.

The touchscreen doesn't work.

Information on a touchscreen.

 

Response to the command "dmesg":

...

[   12.190584] input: Touch Touch Device T1 as /devices/platform/sw-ehci.2/usb4/4-1/4-1.3/4-1.3:1.0/input/input2

[   12.205405] hid-multitouch 0003:1FF7:0013.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [Touch Touch Device T1] on usb-sw-ehci-1.3/input0

[   12.211921] usbcore: registered new interface driver eucr

[   12.232911] sd 1:0:0:0: Attached scsi generic sg0 type 0

[   12.237727] sd 2:0:0:0: Attached scsi generic sg1 type 0

[   12.298823] input: Touch Touch Device T1 as /devices/platform/sw-ehci.2/usb4/4-1/4-1.3/4-1.3:1.1/input/input3

[   12.351571] hid-multitouch 0003:1FF7:0013.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Touch Touch Device T1] on usb-sw-ehci-1.3/input1

...

[ 3052.626051] hid-multitouch 0003:1FF7:0013.0001: can't reset device, sw-ehci-1.3/input0, status -71

[ 3052.648371] hid-multitouch 0003:1FF7:0013.0001: can't reset device, sw-ehci-1.3/input0, status -71

[ 3052.670734] hid-multitouch 0003:1FF7:0013.0001: can't reset device, sw-ehci-1.3/input0, status -71

[ 3052.692970] hid-multitouch 0003:1FF7:0013.0001: can't reset device, sw-ehci-1.3/input0, status -71

[ 3052.706853] usb 4-1.3: USB disconnect, device number 4

[ 3053.053445] usb 4-1.3: new full-speed USB device number 6 using sw-ehci

[ 3053.205528] input: Touch Touch Device T1 as /devices/platform/sw-ehci.2/usb4/4-1/4-1.3/4-1.3:1.0/input/input4

[ 3053.219532] hid-multitouch 0003:1FF7:0013.0003: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [Touch Touch Device T1] on usb-sw-ehci-1.3/input0

[ 3053.236939] input: Touch Touch Device T1 as /devices/platform/sw-ehci.2/usb4/4-1/4-1.3/4-1.3:1.1/input/input5

[ 3053.251759] hid-multitouch 0003:1FF7:0013.0004: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Touch Touch Device T1] on usb-sw-ehci-1.3/input1

[ 3176.434287] hid-multitouch 0003:1FF7:0013.0003: can't reset device, sw-ehci-1.3/input0, status -71

...

[15061.406646] input: Touch Touch Device T1 as /devices/platform/sw-ehci.2/usb4/4-1/4-1.3/4-1.3:1.1/input/input25

[15061.419502] hid-multitouch 0003:1FF7:0013.0018: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Touch Touch Device T1] on usb-sw-ehci-1.3/input1

 

Response to the command "lsusb -tv":

/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=sw-ohci/1p, 12M

/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=sw-ehci/1p, 480M

    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M

        |__ Port 1: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 480M

        |__ Port 3: Dev 15, If 0, Class=Human Interface Device, Driver=usbhid, 12M

        |__ Port 3: Dev 15, If 1, Class=Human Interface Device, Driver=usbhid, 12M

        |__ Port 4: Dev 5, If 0, Class=Mass Storage, Driver=usb-storage, 480M

/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=sw-ohci/1p, 12M

    |__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M

    |__ Port 1: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M

/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=sw-ehci/1p, 480M

/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=sw_hcd_host0/1p, 480M

 

Response to the command "lsusb -v":

...

Bus 004 Device 015: ID 1ff7:0013 CVT Electronics.Co.,Ltd CVTouch Screen (HID)

...

 

Response to the command "lsmod":

Module                           Size   Used by

bnep                            14360   2

cpufreq_userspace        3540   0

sg                                 23918   0

keucr                            58671   0

hid_multitouch               7719   0

mali                            112222   0

ump                             61778   1 mali

ap6210                      623704   0

sunxi_ir                          4044   0

hidp                             17740   0

rfcomm                        58820   2

hci_uart                      25074   1

bluetooth                  265449   27 bnep,hidp,hci_uart,rfcomm

 

 

++++++++++++++++++++++++++++++++++++++

 

Linux cubietruck 4.9.11-sunxi version.

The touchscreen works.

Information on a touchscreen.

 

Response to the command "dmesg":

...

[    5.595234] usb 2-1.3: Product: Touch Device T1

[    5.595240] usb 2-1.3: Manufacturer: Touch

[    5.595245] usb 2-1.3: SerialNumber: WГїnq\xffffffc2\xffffff84WH2g28

[    5.617178] input: Touch Touch Device T1 as /devices/platform/soc@01c00000/1c1c000.usb/usb2/2-1/2-1.3/2-1.3:1.1/0003:1FF7:0013.0004/input/input3

[    5.623122] hid-generic 0003:1FF7:0013.0004: input,hiddev0,hidraw2: USB HID v1.10 Mouse [Touch Touch Device T1] on usb-1c1c000.usb-1.3/input1

...

[   11.903343] input: Touch Touch Device T1 as /devices/platform/soc@01c00000/1c1c000.usb/usb2/2-1/2-1.3/2-1.3:1.0/0003:1FF7:0013.0003/input/input5

[   11.932020] hid-multitouch 0003:1FF7:0013.0003: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [Touch Touch Device T1] on usb-1c1c000.usb-1.3/input0

...

 

Response to the command "lsusb -tv":

/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=musb-hdrc/1p, 480M

/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M

/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M

    |__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M

    |__ Port 1: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M

/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M

    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M

        |__ Port 1: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 480M

        |__ Port 3: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 12M

        |__ Port 3: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 12M

        |__ Port 4: Dev 5, If 0, Class=Mass Storage, Driver=usb-storage, 480M

/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M

 

Response to the command "lsusb -v":

...

Bus 002 Device 004: ID 1ff7:0013 CVT Electronics.Co.,Ltd CVTouch Screen (HID)

 

Response to the command "lsmod":

Module Size    Used by

fuse 62777 3

ir_xmp_decoder 2583 0

ir_mce_kbd_decoder 3454 0

ir_sharp_decoder 1921 0

ir_sanyo_decoder 2113 0

ir_sony_decoder 1938 0

ir_jvc_decoder 1936 0

ir_rc6_decoder 2429 0

ir_nec_decoder 2365 0

ir_rc5_decoder 2064 0

bnep 8221 2

hci_uart 13285 1

snd_soc_simple_card 4330 1

snd_soc_simple_card_utils 2374 1 snd_soc_simple_card

snd_soc_spdif_tx 1936 1

sun4i_codec 10104 3

sun4i_spdif 4004 2

hid_multitouch 8053 0

ir_lirc_codec 4088 0

lirc_dev 6245 1 ir_lirc_codec

snd_soc_core 97876 5 snd_soc_spdif_tx,sun4i_codec,snd_soc_simple_card_utils,sun4i_spdif,snd_soc_simple_card

snd_pcm_dmaengine 2770 1 snd_soc_core

snd_pcm 57757 2 snd_pcm_dmaengine,snd_soc_core

pwm_sun4i 4180 0

snd_timer 14809 1 snd_pcm

sunxi_cir 3159 0

nvmem_sunxi_sid 1967 0

snd 35783 9 snd_timer,snd_soc_core,snd_pcm

soundcore 858 1 snd

nvmem_core 7158 1 nvmem_sunxi_sid

sun4i_ts 3414 0

evdev 9412 8

input_leds 2292 0

sun4i_ss 13213 0

cpufreq_dt 2920 0

uio_pdrv_genirq 2780 0

uio 6272 1 uio_pdrv_genirq

bonding 82855 0

hidp 10350 0

rfcomm 25650 14

bluetooth 247788 39 hidp,hci_uart,bnep,rfcomm

brcmfmac 144129 0

brcmutil 4189 1 brcmfmac

cfg80211 337391 1 brcmfmac

rfkill 8383 6 bluetooth,cfg80211

uas 10265 0

pwrseq_simple 2066 1

realtek 2583 0

From this information it is visible that the touchscreen in system is defined.

The system tries to drop it, but can't.

Obviously in a kernel the necessary modules aren't set.