Orange Pi PC = Server = Debian Jessie

Programs does not start automatically at boot,  I tested the deluge, transmission and vsftpd;

Same commands used in Raspbian Jessie: Does not start automatic:

sudo update-rc.d deluge-daemon defaults
sudo update-rc.d transmission-daemon defaults

 

Edited April 12, 20179 yr by Igor
formatting

We use stock Debian Jessie system(d) manager. Some background and tips:

https://www.digitalocean.com/community/tutorials/how-to-use-systemctl-to-manage-systemd-services-and-units

This is very complicated for me, , I usually find tutorials ready to install programs, 
I would not know how to do these boot modifications

IIRC if you install Transmission with this command: 

apt install transmission-cli transmission-common transmission-daemon

you don't need to do anything else. It starts automatically. Similar goes for others ... just follow generic Debian & Ubuntu install guides and you should be fine.

BTW: with next update we will include this installer:

 

https://github.com/igorpecovnik/Debian-micro-home-server

It is possible that the transmission "issue" is this - wrong start order in relation to network related services:

which is not an Armbian issue since it comes from upstream releases, and AFAIK there is no proper solution for this yet, only workarounds.

Maybe is the same problem I have in Raspbian and Rapberry Pi 

https://raspberryparatorpes.net/comandos/transmission-no-se-reinicia-en-raspbian/

I think the Solution #3:

sudo systemctl enable transmission-daemon.service

9 minutes ago, manuti said:

Maybe is the same problem I have in Raspbian and Rapberry Pi 

https://raspberryparatorpes.net/comandos/transmission-no-se-reinicia-en-raspbian/

I think the Solution #3:

sudo systemctl enable transmission-daemon.service

In raspberry everything works normal, according to friend above, in armbian it works other than initialization

 

Need to install these only programs, PYLOAD, DELUGE, TRANSMISSION, ARIA2C vsftpd

3 hours ago, Igor said:

IIRC if you install Transmission with this command: 

apt install transmission-cli transmission-common transmission-daemon

you don't need to do anything else. It starts automatically. Similar goes for others ... just follow generic Debian & Ubuntu install guides and you should be fine.

I installed it now, but it does not start automatically, to start I have to use  sudo service transmission-daemon stop 
command and then sudo service transmission-daemon start

Now add this to /etc/rc.local and it will.

29 minutes ago, Igor said:

Now add this to /etc/rc.local and it will.

open sudo nano /etc/rc.local and add this sudo service transmission-daemon start ?

I got it, thanks to everyone who helped