Hello guys,

 

I built OS with legacy kernel for Orange Pi One using github framework https://github.com/armbian/build .

Everything went fine and I got a resulting img file. I copied it to 16GB SD card (7Samsung EVO class 10)

and powered up my device but it couldn't start. 

Below is the log I got from UART console. You can see from it that my device was retrying boot sequence over and over unsuccessfully.

Can you help with the problem, please ?

 

P.S. I also built Armbian with mainline kernel and it loaded fine, i.e. problem exists only with legacy kernel

 

-------------------------------------------------------------------------------------------

 

U-Boot 2017.05-armbian (Jun 05 2017 - 15:22:02 +0300) Allwinner Technology

CPU:   Allwinner H3 (SUN8I 1680)
Model: Xunlong Orange Pi One
DRAM:  512 MiB
MMC:   SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   phy interface0
eth0: ethernet@1c30000
Hit any key to stop autoboot:  0
38518 bytes read in 144 ms (260.7 KiB/s)
Unknown command 'bmp' - try 'help'
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
3565 bytes read in 196 ms (17.6 KiB/s)
## Executing script at 43100000
U-boot loaded from SD
Boot script loaded from mmc
115 bytes read in 156 ms (0 Bytes/s)
5172433 bytes read in 520 ms (9.5 MiB/s)
4805832 bytes read in 520 ms (8.8 MiB/s)
Found legacy kernel configuration
34704 bytes read in 476 ms (70.3 KiB/s)
## Loading init Ramdisk from Legacy Image at 43300000 ...
   Image Name:   uInitrd
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    5172369 Bytes = 4.9 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK

Starting kernel ...

[sun8i_fixup]: From boot, get meminfo:
        Start:  0x40000000
        Size:   512MB
ion_carveout reserve: 160m@0 256m@0 130m@1 200m@1
ion_reserve_select: ion chipid  [0x2c00081!
ion_reserve_common: ion reserve: [0x56000000, 0x60000000]!
Loading, please wait...
starting version 229
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
done.
Begin: Will now check root file system ... fsck from util-linux 2.27.1
[/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1
/dev/mmcblk0p1 has unsupported feature(s): metadata_csum
e2fsck: Get a newer version of e2fsck!
fsck exited with status code 8
done.
Warning: File system check failed but did not detect errors
mount: mounting /dev/mmcblk0p1 on /root failed: Invalid argument
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... mount: mounting /dev on /root/dev failed: No such file or directory
done.
mount: mounting /run on /root/run failed: No such file or directory
run-init: current directory on the same filesystem as the root: error 0
Target filesystem doesn't have requested /sbin/init.
run-init: current directory on the same filesystem as the root: error 0
run-init: current directory on the same filesystem as the root: error 0
run-init: current directory on the same filesystem as the root: error 0
run-init: current directory on the same filesystem as the root: error 0
run-init: current directory on the same filesystem as the root: error 0
No init found. Try passing init= bootarg.
Rebooting automatically due to panic= boot argument

 

-----------------------------------------------------------------------------------------------------------------

Please provide build logs