Can someone please test this img on Orange Pi Lite. 4gb sd card or larger

 

You can use nmtui to connect to wifi

Connect to wifi the point browser to port 5000 of the IP address to see if gui starts and doesn't have any issues. http://x.x.x.x:5000

Thank you for your help.

 

login root password octoprint

 

Full instructions here

 

http://www.cnx-software.com/2017/07/11/how-to-use-octoprint-on-orange-pi-lite-board-amlogic-s905x-and-s912-tv-boxes/

 

 

Hi prahjister

 

Thanks for the img file

 

what is the Path to CuraEngine and can i use the camera come with orange pi late ?

 

 

Thanks

I'm also very interested in the 5MP camera opi comes with there is alreadya guy that figured it out. http://sanchosk.blogspot.ro/2016/08/orange-pi-one-and-camera.html

there is a forum post (that I'm not able to find at the moment) that makes it copy pastable but still there is no tut to combine all with Octo. This can be all scripted for !!!!!!armbian-config!!!!!!! instead of images.

Hi B K O

 

 

I didn't manage to get camera work with Orange Pi Lite and if any one know how let us know.

 

 

thanks

Sorry guys thanks for the reply. 

 

No Cura Engine on this build. It is really old so didnt see the need

 

Camera does work. Dont recommend opi camera. Not very good. But to use usb camera.  First plug in the camera. Go into settings and video adjust the one ip address from 10.0.0.40 to the IP address of your orange PI. Then under power button turn on the webcam

 

Is anyone successfully using this for multiple days?

I just start Testing , so far great , I was able to start the device , connect to my network , reach oktoprint, so im close to a few Tests, only one point I didnt get working so far ( sorry im a rel beginner) how to set a fixed IP adress for the wifi connection ?

br

Thomas

@prahjister Have you set up Avahi on that image? Just wondering if something like http://octoprint.local would work with your image, making IP addresses not necessary? Otherwise it's probably either setting a fixed address on your router, using (sudo) nmtui to configure the connection (assuming network manager is managing the connection) or some ugly /etc/network/interfaces edits. 

 

octoprint.local is not working in mycase ( if that information is helping you)

 

one more point i just find out, I could sucessfully connect to the printer now , but the webcam only show me webcamstream loading .

 

Any idea for that Camera Point ?

 

br

Thomas

Thanks pfeerick the network point i could solve with your tip ( i not found the edit connectione before)

 

so finaly I only not get my logitech webcam runnng, hope someone have an idea here too.

 

tomorrow hope to test with a first print on it

 

BR

Thomas

I test the image for 10 days and so far everything work  great i have  one more question what is (

OctoPrint checkout folder path) so we can set auto plugin update.

 

 (Please configure the checkout folder of OctoPrint, otherwise this plugin won't be able to update it. )     

 thanks

Thank you so much for the feedback. This is for an article I am writing and will update and make it easier with full instructions. Also one for s905x box. 

 

Did you find wifi dropping periodically. I think I might have got a bad board.

 

On 26. 6. 2017 at 11:19 AM, pfeerick said:

@prahjister Have you set up Avahi on that image? Just wondering if something like http://octoprint.local would work with your image, making IP addresses not necessary? Otherwise it's probably either setting a fixed address on your router, using (sudo) nmtui to configure the connection (assuming network manager is managing the connection) or some ugly /etc/network/interfaces edits. 

 

I will setup avahi as well. Thank yoy

 

Also sorry for ling time between reply. I didn't have notifications setup properly

Here you can find more about this: http://www.cnx-software.com/2017/07/11/how-to-use-octoprint-on-orange-pi-lite-board-amlogic-s905x-and-s912-tv-boxes/

Hi

 

I have one issue some time when i start print my printer restart randomly

On 7/13/2017 at 11:00 AM, ooaa said:

Hi

 

I have one issue some time when i start print my printer restart randomly

I had one do that as well until i changed my usb cable.  I used a shorter one and it resolved the issue

Hi I am. Using octoprint with orange pi lite.  I encountered some freeze in middle print, no particular reason, but I think is freezing if for some reason you restart your rooter