Skip to content
View in the app

A better way to browse. Learn more.

Armbian Community Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Bug Armbian 5.38 and wifi on Cubietruck

Featured Replies

Hello on mainline stretch debian 9 Armbian 5.38 with cubietruck

cubietruck is connected to eth0 and wlan0

 

My problem: when i disconnect eth0 i can not connect to wlan0 ( ssh and explorer page ), on my router i look wlan0: 192.168.1.119 and all is ok

 

config: Welcome to ARMBIAN 5.38 stable Debian GNU/Linux 9 (stretch) 4.14.15-sunxi   
System load:   0.36 0.59 0.64      Up time:       1 day        
Memory usage:  15 % of 2011MB     IP:            192.168.1.161 192.168.1.119
CPU temp:      35°C               
Usage of /:    43% of 7.2G       Battery:       100% charged   

 

result ifconfig:

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.161  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 fe80::11:2ff:fe81:7dd0  prefixlen 64  scopeid 0x20<link>
        ether 02:11:02:81:7d:d0  txqueuelen 1000  (Ethernet)
        RX packets 1054055  bytes 1055518587 (1006.6 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 1093663  bytes 773751245 (737.9 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 51  

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 49326  bytes 6945080 (6.6 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 49326  bytes 6945080 (6.6 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST>  mtu 1500
        inet 10.9.1.37  netmask 255.255.255.255  destination 10.9.1.38
        inet6 fe80::d347:d69e:2a2c:e7ae  prefixlen 64  scopeid 0x20<link>
        unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  txqueuelen 100  (UNSPEC)
        RX packets 245  bytes 54989 (53.7 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 226  bytes 72769 (71.0 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.119  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 fe80::a586:2b7a:315e:8a3b  prefixlen 64  scopeid 0x20<link>
        ether 98:3b:16:80:ad:f3  txqueuelen 1000  (Ethernet)
        RX packets 82537  bytes 5781701 (5.5 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 1191  bytes 147673 (144.2 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 

result iwconfig:

wlan0     IEEE 802.11  ESSID:"NICOXYGEN"  
          Mode:Managed  Frequency:2.462 GHz  Access Point: 14:DD:A9:71:83:10   
          Bit Rate=5.5 Mb/s   Tx-Power=31 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=41/70  Signal level=-69 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:8  Invalid misc:0   Missed beacon:0
 

Guest
This topic is now closed to further replies.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.