Hi,

 

i recently installed jessie (vanilla) on a cubietruck.

I have problems with a usb stick to be correctly detected.

It is a rf stick to communicate with Homematic devices (HM-CFG-USB).

 

When I plug it in, I get following messages in syslog:

 

Feb  8 21:34:38 localhost kernel: [ 5043.855985] usb 3-1: new full-speed USB device number 8 using ohci-platform

Feb  8 21:34:38 localhost kernel: [ 5044.079007] usb 3-1: New USB device found, idVendor=1b1f, idProduct=c00f

Feb  8 21:34:38 localhost kernel: [ 5044.079041] usb 3-1: New USB device strings: Mfr=4, Product=14, SerialNumber=36

Feb  8 21:34:38 localhost kernel: [ 5044.079060] usb 3-1: Product: HM-CFG-USB

Feb  8 21:34:38 localhost kernel: [ 5044.079077] usb 3-1: Manufacturer: eQ-3

Feb  8 21:34:38 localhost kernel: [ 5044.079093] usb 3-1: SerialNumber: LEQ0659333

Feb  8 21:34:38 localhost kernel: [ 5044.092021] hid-generic 0003:1B1F:C00F.000A: device has no listeners, quitting

Feb  8 21:34:38 localhost mtp-probe: checking bus 3, device 8: "/sys/devices/platform/soc@01c00000/1c14400.usb/usb3/3-1"

Feb  8 21:34:38 localhost mtp-probe: bus: 3, device: 8 was not an MTP device

 

On raspberry / wheezy I have no problems detecting the stick:

Feb  8 19:56:49 raspberrypi kernel: [4414242.954861] usb 1-1.2: new full-speed USB device number 8 using dwc_otg

Feb  8 19:56:49 raspberrypi kernel: [4414243.059928] usb 1-1.2: New USB device found, idVendor=1b1f, idProduct=c00f

Feb  8 19:56:49 raspberrypi kernel: [4414243.059972] usb 1-1.2: New USB device strings: Mfr=4, Product=14, SerialNumber=36

Feb  8 19:56:49 raspberrypi kernel: [4414243.059991] usb 1-1.2: Product: HM-CFG-USB

Feb  8 19:56:49 raspberrypi kernel: [4414243.060008] usb 1-1.2: Manufacturer: eQ-3

Feb  8 19:56:49 raspberrypi kernel: [4414243.060025] usb 1-1.2: SerialNumber: LEQ0659333

Feb  8 19:56:49 raspberrypi kernel: [4414243.077115] hid-generic 0003:1B1F:C00F.0002: hiddev0,hidraw0: USB HID v1.10 Device [eQ-3 HM-CFG-USB] on usb-20980000.usb-1

.2/input0

 

Could someone help me, please?

 

Thanks!

Martin

 

I added hiddev and hidraw options to mainline kernel config, so this should be fixed with new kernel release.

If you want to test it now, you can try installing prebuilt kernel from this topic (you need to install at least linux-image and linux-dtb packages).

Hi,

 

The new kernel now lets me access the USB stick and I can fetch RF-data from it.

 

Thx very much for the quick help!

Martin

On 2/8/2016 at 10:39 PM, zador.blood.stained said:

I added hiddev and hidraw options to mainline kernel config, so this should be fixed with new kernel release.

If you want to test it now, you can try installing prebuilt kernel from this topic (you need to install at least linux-image and linux-dtb packages).

 

I have a similar problem with apcupsd on a Odroid XU4 board, see this topic

 

CONFIG_USB_HIDDEV was disabled on the kernel configuration file, while CONFIG_HIDRAW is already enabled.

I build the kernel with CONFIG_USB_HIDDEV enabled, but it is still not working.

Any ideas?

 

Thanks in advance.

 

P.S. In this case

https://forum.odroid.com/viewtopic.php?f=93&t=28978

enabling CONFIG_USB_HIDDEV was enough

https://github.com/hardkernel/linux/commit/be592282a08a2493692448e365e46b52ac715b3f