Hello every one I'm new to this site and I have recently purchased an Orange Pi Win Plus but got a lot of issues in configuring it.
I'm now able to blink LED through Shell and C with WiringPi but I couldn't find any working Python 3 based Library for GPIO.

I installed WiringPi from : https://github.com/OrangePiLibra/WiringPi

This actually helped me to access GPIO through C/C++ and Shell but I couldn't find any thing for Python that's working.

I came accross a new Python Library : "pyA64" but its not working. Also, the library "OPi.GPIO" doesn't supports my Board.
I also tried this : https://github.com/lanefu/WiringPi-Python-OP
but that's makes my "gpio" command to stop functioning.

I need help!!
Does anyone knows how to access GPIO on Orange Pi Win Plus through Python ?

I never tried to use directly the GPIO with c/c++ but I skipped the whole hassle to find a working overlay using an 8 way i2c GPIO port expander.  If you have electronic skills you can buy this chip:

http://www.ti.com/lit/ds/symlink/tca9554.pdf

and make a board for it or you can go with a plug&play alternative like this:

https://www.abelectronics.co.uk/p/54/IO-Pi-Plus

 

You can manage the the i2c bus enabling it's overlay (add in /boot/armbianEnv.txt overlays=i2c0), install i2ctools (apt-get install i2c-tools) and smbus2 library for python (pip install...)

good luck!

 

I'm starting with the orange pi win plus. Does anyone have tips on how to install phyton on it?

 

Thank the all ;D

3 hours ago, Renisson said:

Does anyone have tips on how to install phyton on it?

Python is installed by default ... while Python I/O libraries are not.

On 02/07/2018 at 02:22, Igor said:

O Python é instalado por padrão ... enquanto as bibliotecas de E / S do Python não são.

 

I need tips to use GPIO on orange pi Win plus. All my attempts were flawed

There are many ways to use GPIO. You can use classic sysfs, ie : /sys/class/gpio

You can also take the python Pine64 library : https://github.com/swkim01/RPi.GPIO-PineA64

You can even use that one since it has been ported for H5 with proper 64bits pointers : https://github.com/herzig/orangepi_PC_gpio_pyH5

 

EDIT : There is also this one coming from A64-OlinuXino : https://files.pythonhosted.org/packages/29/a8/e9ce35c362e6340713bbbffcf260c4ffca87b404d9811e5d400f33e6c5c8/pyA64-0.1.0.tar.gz