Here my changes over the script.fex file to achieve compatibility with the 15.6FHD LCD display
 

[disp_init]
disp_init_enable = 1
disp_mode = 0
screen0_output_type = 1
screen0_output_mode = 4
screen1_output_type = 0
screen1_output_mode = 4
fb0_width = 1920
fb0_height = 1080
fb0_framebuffer_num = 2
fb0_format = 10
fb0_pixel_sequence = 0
fb0_scaler_mode_enable = 1
fb1_width = 1024
fb1_height = 600
fb1_framebuffer_num = 2
fb1_format = 10
fb1_pixel_sequence = 0
fb1_scaler_mode_enable = 0
lcd0_backlight = 0
lcd1_backlight = 197
lcd0_bright = 50
lcd0_contrast = 50
lcd0_saturation = 57
lcd0_hue = 50
lcd1_bright = 239
lcd1_contrast = 50
lcd1_saturation = 57
lcd1_hue = 50

[lcd0_para]
lcd_used = 1
lcd_x = 1920
lcd_y = 1080
lcd_dclk_freq = 152
lcd_pwm_not_used = 0
lcd_pwm_ch = 0
lcd_pwm_freq = 1000
lcd_pwm_pol = 1
lcd_max_bright = 240
lcd_min_bright = 64
lcd_if = 3
lcd_hbp = 100
lcd_ht = 2226
lcd_vbp = 23
lcd_vt = 2284
lcd_vspw = 0
lcd_hspw = 0
lcd_hv_if = 0
lcd_hv_smode = 0
lcd_hv_s888_if = 0
lcd_hv_syuv_if = 0
lcd_lvds_ch = 1
lcd_lvds_mode = 0
lcd_lvds_bitwidth = 1
lcd_lvds_io_cross = 0
lcd_cpu_if = 0
lcd_frm = 1
lcd_io_cfg0 = 268435456
lcd_gamma_correction_en = 0
lcd_gamma_tbl_0 = 0x0
lcd_gamma_tbl_1 = 0x10101
lcd_gamma_tbl_255 = 0xffffff
lcd_power_used = 1
lcd_power = port:PH08<1><0><default><1>
lcd_pwm_used = 1
lcd_pwm = port:PB02<2><0><default><default>
lcdd0 = port:PD00<3><0><default><default>
lcdd1 = port:PD01<3><0><default><default>
lcdd2 = port:PD02<3><0><default><default>
lcdd3 = port:PD03<3><0><default><default>
lcdd4 = port:PD04<3><0><default><default>
lcdd5 = port:PD05<3><0><default><default>
lcdd6 = port:PD06<3><0><default><default>
lcdd7 = port:PD07<3><0><default><default>
lcdd8 = port:PD08<3><0><default><default>
lcdd9 = port:PD09<3><0><default><default>
lcdd10 = port:PD10<3><0><default><default>
lcdd11 = port:PD11<3><0><default><default>
lcdd12 = port:PD12<3><0><default><default>
lcdd13 = port:PD13<3><0><default><default>
lcdd14 = port:PD14<3><0><default><default>
lcdd15 = port:PD15<3><0><default><default>
lcdd16 = port:PD16<3><0><default><default>
lcdd17 = port:PD17<3><0><default><default>
lcdd18 = port:PD18<3><0><default><default>
lcdd19 = port:PD19<3><0><default><default>
lcdd20 = port:PD20<3><0><default><default>
lcdd21 = port:PD21<3><0><default><default>

thanks man! It did the trick for me

Hi,

I'm trying to do something similar with the OLIMEX 10.4" 1024x600 LCD.

Any suggestions?
Thanks

Hi,

I'm trying to do something similar with the OLIMEX 10.4" 1024x600 LCD.

Any suggestions?

Thanks

 

Try to change this values to your desired LCD screen size

 

[disp_init]

fb0_width = 1920

fb0_height = 1080

 

[lcd0_para]

lcd_x = 1920

lcd_y = 1080

 

Finally, check the LCD pin-map and change the ports according to this parameters: lcddX