Hellow there,

I installed Armbian_5.67_Aml-s9xxx_Ubuntu_bionic_default_4.19.0-rc7_desktop_20181117 to my Phicomm N1 box and found that the WIFI/Bluetooth is not available. 

 

Anyone can help me install the drivers?

 

 ____  ___                   
/ ___|/ _ \__  ____  ____  __
\___ \ (_) \ \/ /\ \/ /\ \/ /
 ___) \__, |>  <  >  <  >  < 
|____/  /_//_/\_\/_/\_\/_/\_\
                             

Welcome to ARMBIAN 5.67 user-built Ubuntu 18.04.1 LTS 4.19.0-rc7-aml-s9xxx   
System load:   2.45 1.19 0.57            Up time:       9 min        
Memory usage:  16 % of 1844MB     IP:            192.168.9.46
CPU temp:      49°C               
Usage of /:    9% of 29G        storage/:      51% of 128M       

[ General system configuration (beta): armbian-config ]

Last login: Wed Nov 28 12:14:46 2018

 

hardware info:

 

CPU: Amlogic S905D

RAM: 2G DDR3

8G eMMC

Ethernet: RTL8211F Gigabit Ethernet

WIFI/Bluetooth: CYW43455 ( same as Raspberry Pi 3B+ ) 5G WiFi IEEE 802.11n/ac with Integrated Bluetooth 4.1 

Datasheet

http://www.cypress.com/documentation/datasheets/cyw43455-single-chip-5g-wifi-ieee-80211nac-macbaseband-radio-integrated

Maybe @balbes150 could you help with informations about to integrate the Cypress w43455 - if you do ask in this thread:

 

The case of the Phicomm N1 looks - for me - very nice   A Bit like a NeXT-device in white
Where did you get your device and whats the normal price?

Phicomm N1:
http://www.phicomm.com/vn/index.php/Products/personal_show/cateid/15/id/72.html

 

Specifications:

Spoiler

CPU：

Amlogic S905 Cortex-A53 Quad Core 1.5Ghz

Dimension：

110 x 110 x 40 mm

Weight：

248g

Wi-Fi：

2.4G/5G

BT：

BLE 4.1

Remote Access：

Y

RAM+ROM：

2GB+8GB

HDMI Port：

1

USB Port：

USB2.0 x 2

Maximum Hard disk su：

4

Write/Read Speed：

60MB/s

Resolution：

4K 60fps

Screen Projection：

Y

Screen Shot：

Y

TV Remote：

Y

Digital Currency：

DayDay Win

 

Other page for armbian-reference:

https://www.mivm.cn/phicomm-n1-linux/

@guidol  I am trying to upload Phicomm N1 to my eBay shop. But its postage is higher than the device itself. I can say it is bloody cheap. Just 30usd/set plus shipping charges from China to worldwide. 7*7*3 Inch in size, less than 2 lb. I think the shipping charges will be 40usd by FedEx to the USA.

 

Hardware:

CPU: Amlogic S905D, ARM Cortex-A53, Quad Core 2GHz

GPU: ARM Mali™-450, 4K@60fps Hardware acceleration support, HDMI 2.0

RAM: K4B4G1646E, DDR3-1866MHz 512MB*4=2GB

ROM: KLM8G1GEME, 8GB eMMC

Port: 1*HDMI 2.0; 2*USB2.0; 1*Gigabit Ethernet

Power Adapter: Input 110-240V～50/60Hz AC; Output 12V/2A DC

Ethernet(LAN): RTL8211F Gigabit Ethernet

WIFI/Bluetooth: CYW43455 (same as Raspberry Pi 3B+) 2.4G/5G WiFi IEEE 802.11n/ac with Integrated Bluetooth 4.1

Wireless Datasheet:

http://www.cypress.com/documentation/datasheets/cyw43455-single-chip-5g-wifi-ieee-80211nac-macbaseband-radio-integrated

17 minutes ago, Bangliang Shen said:

Output 12V/2A

awesome 24W..  @Bangliang Shen

can you confirm this?

Yes I read this on the power adaptor it says Output 12V/2A and the adaptor size is even smaller than those of Netgear routers.  This is a really cool device!

Interesting box, especially with all the Linux distributions provided by the Chinese community.
But I can't find it for sale anywhere, even in China. I could see it in JD (for 1099 RMB!), but it's now been removed.

3 hours ago, cnxsoft said:

Interesting box, especially with all the Linux distributions provided by the Chinese community.
 

https://www.cnx-software.com/2019/03/11/phicomm-n1-tv-box-linux-distributions/

On 11/28/2018 at 3:37 PM, Bangliang Shen said:

Phicomm N1 box and found that the WIFI/Bluetooth is not available. 

 

Anyone can help me install the drivers?

Have you tried the latest version of the image with the kernel 5 ?

Quote

Phicomm N1 box and found that the WIFI/Bluetooth is not available. 

 

Anyone can help me install the drivers?

there is an article about using dtd&dtc to replace the current wifi/bluetooth module as Raspberry Pi 3B+

but i am not tried yet.  wish it helps

 

https://www.raspberrypi.org/documentation/configuration/device-tree.md