Hi,

 

I've installed Armbian 5.0.4 Wheezy.  I'm trying to configure the sound, but no success

jme@cubieboard:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: sun4icodec [sun4i-codec], device 0: CDC PCM Codec-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0

jme@cubieboard:~$ cat /etc/asound.conf 
pcm.!default {
  type hw
  card 0
  device 0
}
ctl.!default {
  type hw
  card 0
}

jme@cubieboard:~$ speaker-test -twav -c2

speaker-test 1.0.25

Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
WAV file(s)
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 128 to 131072
Period size range from 64 to 16384
Using max buffer size 131072
Periods = 4
was set period_size = 16384
was set buffer_size = 131072
 0 - Front Left
 1 - Front Right
Write error: -5,Input/output error
xrun_recovery failed: -5,Input/output error
Transfer failed: Operation not permitted

Any idea ?

 

Thank's

 

Regards

Audio might be muted, permission related - try playing audio under root.

Hi Igor,

 

Once again thank's a lot!!

 

Unfortunately it's not the problem

root@cubieboard:/home/jme# speaker-test -twav -c2

speaker-test 1.0.25

Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
WAV file(s)
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 128 to 131072
Period size range from 64 to 16384
Using max buffer size 131072
Periods = 4
was set period_size = 16384
was set buffer_size = 131072
 0 - Front Left
 1 - Front Right
Write error: -5,Input/output error
xrun_recovery failed: -5,Input/output error
Transfer failed: Operation not permitted

Regards

Then it might be broken in kernel. I'll do testing on new images / kernel builds ... soon.

Thank's a lot!!!