j0ta

It was already fixed in 7.2.9 edge nightly, but 7.2 branch is gone due to 7.3 rc 6 edge nightly which makes the board unstable to use, (yesterday, after .debs build it will be solved, (Thanks Igor for the pr) people who don't know how to upgrade kernel will have that thread issue using current kernel (default)

Bleeding-edge branch was where 7.1 rc was put first, then moved to edge The ethernet fix patch is the following, current kernel gives upload speeds of 10/mbps https://github.com/armbian/build/blob/main/patch/kernel/archive/rockchip64-7.3/board-odroidm1-change-ethernet-TXD-timing-delay-value.patch The following thread describes the issue that various users have with current kernel I'll try with edge kernel instead of current kernel (No nightly build) maybe it's just the current kernel that is doing that speed cut Thanks !

I understand what you are saying, and I appreciate the work that you guys do here, but since only nightly edge kernels contain the ethernet speed fix for m1 we are kinda forced to use that one I'm not asking for testing it, just move the rc kernels into bleeding-edge until the stable release Thanks once again !

Seems it will be fixed with this pr https://github.com/armbian/build/commit/294f074c9da2902b51146ab56ddb36c7236e1f54 Until .debs build avoid upgrading

Edge kernel 7.3.0-rc6 Makes board unstable [ 1173.843180] rockchip-dw-pcie 3c0800000.pcie: PCIe Gen.3 x2 link up [ 1173.971258] pcieport 0002:20:00.0: Root Port has been reset [ 1173.971328] nvme nvme0: restart after slot reset [ 1173.982877] nvme nvme0: D3 entry latency set to 8 seconds [ 1173.994210] nvme nvme0: 4/0/0 default/read/poll queues [ 1173.994642] pcieport 0002:20:00.0: AER: device recovery successful [ 1173.994719] pcieport 0002:20:00.0: Recovering Root Port due to Link Down [ 1173.994761] nvme nvme0: frozen state error detected, reset controller [ 1174.028524] phy phy-fe8c0000.phy.7: lane number 0, val 1 [ 1174.343104] rockchip-dw-pcie 3c0800000.pcie: PCIe Gen.3 x2 link up [ 1174.471131] pcieport 0002:20:00.0: Root Port has been reset [ 1174.471191] nvme nvme0: restart after slot reset [ 1174.486326] nvme nvme0: D3 entry latency set to 8 seconds [ 1174.496045] nvme nvme0: 4/0/0 default/read/poll queues [ 1174.496250] pcieport 0002:20:00.0: AER: device recovery successful [ 1174.496284] pcieport 0002:20:00.0: Recovering Root Port due to Link Down [ 1174.496303] nvme nvme0: frozen state error detected, reset controller Please test rc in bleeding-edge before making it available on edge Thanks !

solved with 7.1.8

Hey there, can someone build 7.1.5 debs for me 7.1.6 broke my iptables Thanks !

It's fixed in 7.1.0-rc6-bleedingedge-rockchip64 Cheers !

Just to let you know usb bug is still present in 7.1 rc3 [ 2.596444] usb 4-1: new full-speed USB device number 2 using ohci-platform [ 2.784449] usb 4-1: device descriptor read/64, error -62 [ 3.076447] usb 4-1: device descriptor read/64, error -62 [ 3.356447] usb 4-1: new full-speed USB device number 3 using ohci-platform [ 3.532450] usb 4-1: device descriptor read/64, error -62 [ 3.824440] usb 4-1: device descriptor read/64, error -62 [ 3.928486] usb usb4-port1: attempt power cycle [ 4.140440] usb 4-1: new full-speed USB device number 4 using ohci-platform [ 4.548447] usb 4-1: device not accepting address 4, error -62 [ 4.732456] usb 4-1: new full-speed USB device number 5 using ohci-platform [ 5.140438] usb 4-1: device not accepting address 5, error -62 [ 5.140481] usb usb4-port1: unable to enumerate USB device

This issue is not from u-boot but rather a board config Please see this https://github.com/armbian/build/pull/9333 and use edge kernel instead, stable doesn't include this fix Cheers !

Maybe because it's a "zombie" system with systemd removed and the monitor tools fails to address Here's the dmesg of current system blank

blank

No problem, just to let you guys know Everything else is working Cheers !

Connecting a usb keyboard doesn't seem to work with 7.1 .. [ 2.836541] usb 7-1: new full-speed USB device number 2 using ohci-platform [ 3.024538] usb 7-1: device descriptor read/64, error -62 [ 3.304535] usb 7-1: device descriptor read/64, error -62 [ 3.596542] usb 7-1: new full-speed USB device number 3 using ohci-platform [ 3.780527] usb 7-1: device descriptor read/64, error -62 [ 4.076543] usb 7-1: device descriptor read/64, error -62 [ 4.180566] usb usb7-port1: attempt power cycle [ 4.372529] usb 7-1: new full-speed USB device number 4 using ohci-platform [ 4.780541] usb 7-1: device not accepting address 4, error -62 [ 4.964529] usb 7-1: new full-speed USB device number 5 using ohci-platform [ 5.372526] usb 7-1: device not accepting address 5, error -62 [ 5.372569] usb usb7-port1: unable to enumerate USB device

Bleedingedge Kernel 7.1 rc2 fixed it [ 12.686942] panfrost fde60000.gpu: clock rate = 594000000 [ 12.686994] panfrost fde60000.gpu: bus_clock rate = 500000000 [ 12.710029] panfrost fde60000.gpu: mali-g52 id 0x7402 major 0x1 minor 0x0 status 0x0 [ 12.710053] panfrost fde60000.gpu: features: 00000000,00000df7, issues: 00000000,00000400 [ 12.710062] panfrost fde60000.gpu: Features: L2:0x07110206 Shader:0x00000002 Tiler:0x00000209 Mem:0x1 MMU:0x00002823 AS:0xff JS:0x7 [ 12.710070] panfrost fde60000.gpu: shader_present=0x1 l2_present=0x1