Skip to content
View in the app

A better way to browse. Learn more.

Armbian Community Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Javad Rahimipetroudi

Members
  • Joined

  • Last visited

Everything posted by Javad Rahimipetroudi

  1. Great, I will test it on my side. By the way, I have ported most of the patches on 6.12. This is the last one and I hope it also finishes finally
  2. Hi Nick, Yes, hopefully, the error has been fixed and the panfrost kernel module will be loaded. However, when I play a video, it freezes after a few seconds.
  3. Hi I'm trying to enable GPU on my custom kernel. I have applied a patch from Nick's repository, But when I allow `gpu` node in the Transpeed device tree, the kernel freezes here: [ 9.931994] sun50i-h616-codec 5096000.codec: Failed to register against DMAEngine [ 9.933237] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 9.947692] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 9.955742] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 9.964193] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 9.972000] sun8i-ce 1904000.crypto: Register cbc(aes) [ 9.977448] sun8i-ce 1904000.crypto: Register ecb(aes) [ 9.982650] sun8i-ce 1904000.crypto: Register cbc(des3_ede) [ 9.988522] sun8i-ce 1904000.crypto: Register ecb(des3_ede) [ 9.994324] sun8i-ce 1904000.crypto: CryptoEngine Die ID 0 [ 10.054128] sun8i-mixer 1100000.mixer: Adding to iommu group 0 [ 10.150367] ahub_dam-snd-soc-dummy-dai: substream ahub_dam-snd-soc-dummy-dai has no playback, no capture [ 10.160265] sunxi-snd-mach soc:ahub_dam_mach: ASoC: can't create pcm ahub_dam-snd-soc-dummy-dai :-22 [ 10.176581] sunxi-snd-mach soc:ahub_dam_mach: probe with driver sunxi-snd-mach failed with error -22 [ 10.355412] videodev: Linux video capture interface: v2.00 [ OK ] Reached target sound.target - Sound Card. [ 10.394078] Registered IR keymap rc-empty [ 10.398320] rc rc0: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0 [ 10.405141] input: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0/input4 [ 10.413088] sunxi-ir 7040000.ir: initialized sunXi IR driver [ 10.475252] panfrost 1800000.gpu: clock rate = 432000000 [ 10.480726] panfrost 1800000.gpu: bus_clock rate = 200000000 When I disable the `gpu` node. The Xserver comes up. However, the videos are playing slowly and the CPU usage is 100%. Any idea what could be the problem?
  4. Thanks Nick, I didn't patched my U-Boot yet, is it required for the custom kernel? I finally see something In the logs: [ 4.083865] dwmac-sun8i 5030000.ethernet: IRQ eth_wake_irq not found [ 4.083897] dwmac-sun8i 5030000.ethernet: IRQ eth_lpi not found [ 4.083908] dwmac-sun8i 5030000.ethernet: IRQ sfty not found [ 4.084838] dwmac-sun8i 5030000.ethernet: supply phy-io not found, using dummy regulator [ 4.085323] dwmac-sun8i 5030000.ethernet: PTP uses main clock [ 4.085359] dwmac-sun8i 5030000.ethernet: Current syscon value is not the default 58000 (expect 50000) [ 4.090231] dwmac-sun8i 5030000.ethernet: No HW DMA feature register supported [ 4.090260] dwmac-sun8i 5030000.ethernet: RX Checksum Offload Engine supported [ 4.090268] dwmac-sun8i 5030000.ethernet: COE Type 2 [ 4.090277] dwmac-sun8i 5030000.ethernet: TX Checksum insertion supported [ 4.090285] dwmac-sun8i 5030000.ethernet: Normal descriptors [ 4.090293] dwmac-sun8i 5030000.ethernet: Chain mode enabled But , now it shows the following error. From here https://linux-sunxi.org/Sun8i_emac It seems that the PHY regulator is not enabled: [ 4.323988] dwmac-sun8i 5030000.ethernet: EMAC reset timeout [ 4.329709] dwmac-sun8i 5030000.ethernet eth0: stmmac_dvr_remove: removing driver [ 4.358296] dwmac-sun8i 5030000.ethernet: probe with driver dwmac-sun8i failed with error -110
  5. Hello, I want to activate the ethernet driver in Transpeed 8k H618 TV Box. Which patches should I apply. I have applied the following patches, but still it doesn't work. It is a custom 6.10 kernel that I only need ethernet for it. 0001-nvmem-sunxi_sid-add-sunxi_get_soc_chipid-sunxi_get_serial.patch 0505-net-phy-Add-support-for-AC200-EPHY.patch 0614-clk-sunxi-ng-ccu-sun6i-rtc-fix-32k-clk.patch 0002-drivers-pwm-Add-pwm-sunxi-enhance-driver-for-h616.patch 0531-iommu-sun50i-Allow-page-sizes-multiple-of-4096.patch 0615-drivers-iommu-sun50i-iommu-fix-iommu-on-h616.patch 0003-ASoC-AC200-Initial-driver.patch 0534-media-cedrus-Don-t-CPU-map-source-buffers.patch Code-to-enable-Internal-OSC-Clock-Auto-Calibration.patch 0004-driver-allwinner-h618-emac.patch 0600-drivers-h616-wip-add-usb-emac2-support.patch 0504-mfd-add-AC200.patch 0606-dma-sun6i-dma-add-h616-support.patch

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.