Tu Hu

@going: it's strange，Armbian_23.10_Bananapim3_bookworm_edge_6.4.16_minimal.img doesn't work at all on my board.

@going i tested Armbian_23.10_Bananapim3_bookworm_edge_6.4.10_minimal.zip, it works also on my borad, but if i change the language from RU to US, then dead😵‍💫

@goingmy moard: Bpi-M3 v1.2 AXP813 RTL8211E i can not see the info of LPDDR3, the heat sink glued on the chips

@Gunjan Guptafirst boot with ethernet, works☺️, but run upgrade... dad 😩(log8), new booted.... (log9😩) log8.txt log9.txt

@Gunjan Gupta in the Armbian_5.83_Bananapim3> armbian-image-release # PLEASE DO NOT EDIT THIS FILE BOARD=bananapim3 BOARD_NAME="Banana Pi M3" BOARDFAMILY=sun8i VERSION=5.83 LINUXFAMILY=sunxi BRANCH=next ARCH=arm IMAGE_TYPE=stable BOARD_TYPE=csc INITRD_ARCH=arm KERNEL_IMAGE_TYPE=zImage IMAGE_UUID=0de509c3-93b2-4c43-b227-2a5a7d0ed2aa

@Gunjan Gupta@going dmesg output lod_5.83_notime.txt

@Gunjan Guptaagain with debug log6.txt

@Gunjan Guptai can not find the links of img (Armbian_5.83_Bananapim3_Debian_stretch_next_4.19.38.img), i just have a backup in my disk. the log is very short. log3.txt

@Gunjan Guptathanks for your suggestion. I use always barrel jack. I'm not sure, the power supply hat problem. The old IMG 5.83 works very well on my board.

@Gunjan Guptai have tested 3 different power supplys, nothing changed😥

@Gunjan Gupta again logs from 24.2 log.txt

@Gunjan Guptathanks, i changed the armbianEnv.txt and got the logs log.txt and with img 24.2 got log2.txt log2.txt

@Werneru r right, i changed the speed to 115200, but still didn't work on Windows, but on linux it works:) i got some screenshot, m3 booted to staring kernel.... then reboot, i didn't see any error message

@Wernerthanks. i can not connect to my M3 board via putty, i will try it on linux agagin.

@goingyes, i used HDMI. Sorry, i don't know, how can i get uart output🥺. via UART-->TTL and special programm? during the booting, i saw, error at console-setup.service

@Gunjan Gupta: thanks, your img doesn't work either on my board. booted... then black screen😩

@goingi have Ethernet😟

@Igor@IgorHello, here is the pic of my m3

@going thanks a lot. It's very strange, your img dosen't work either on my m3 board😩. It booted only once, and then black screen. not reboot again.

Hello Going, actualy i have tried a lot of imgs on diffrent SD cars: https://redirect.armbian.com/region/EU/bananapim3/Bookworm_current https://armbian.hosthatch.com/archive/bananapim3/archive/Armbian_23.5.1_Bananapim3_bookworm_current_6.1.30.img.xz https://armbian.hosthatch.com/archive/bananapim3/archive/Armbian_23.5.1_Bananapim3_jammy_current_6.1.30_xfce_desktop.img.xz https://armbian.hosthatch.com/archive/bananapim3/archive/Armbian_23.8.1_Bananapim3_bookworm_current_6.1.47.img.xz https://armbian.hosthatch.com/archive/bananapim3/archive/Armbian_23.8.1_Bananapim3_jammy_current_6.1.47_xfce_desktop.img.xz also https://armbian.hosthatch.com/dl/bananapim3/archive/Armbian_23.11.1_Bananapim3_bookworm_current_6.1.63.img.xz https://armbian.hosthatch.com/dl/bananapim3/archive/Armbian_23.11.1_Bananapim3_jammy_current_6.1.63_xfce_desktop.img.xz external devices just: USB Nano Receiver for keyboard power supply: i habe tried 5V2A, 5V2.5A, 5V 3A, 5V4A，none of them works, but with old Armbian_5.83 works well☹️ with new img boots the board up to login , then reboot.....😥

Hello, i get question for BananaPi M3 user: which img are u using ? on my M3 works only old Armbian_5.83. If i try a new img, reboot it all the time😩