Hi!

I have a Espressobin V7 and would make a router with this tutorial

https://blog.tjll.net/building-my-perfect-router/

 

Dnsmasq is nativ with ArchLinux ARM

That is dnsmasq.conf of the floder /etc

# Listen for requests on this interface
interface=br0

# Address range to draw from
dhcp-range=192.168.1.5,192.168.1.250,255.255.255.0,24h

# Default route for clients (the address we used in /etc/systemd/network/br0.network)
dhcp-option=option:router,192.168.1.1

 

 cat /etc/systemd/network/

 

br0.netdev

[NetDev]
Name=br0
Kind=bridge

br0.network
 

[Match]
Name=br0

[Network]
Address=192.168.1.1/24
IPForward=ipv4
#IPMasquerade=yes not activ while I need 1 Gbit/s between wan and br0
ConfigureWithoutCarrier=yes

eth0.network

[Match]
Name=eth0

lan.network

[Match]
Name=lan*

[Network]
Bridge=br0
BindCarrier=eth0

wan.network

[Match]
Name=wan

[Network]
DHCP=yes
DNSSEC=no
BindCarrier=eth0
IPForward=ipv4

Error when i start dnsmasq with

systemctl start dnsmasq

 

May 13 00:49:46 alarm systemd-resolved[344]: Using degraded feature set (UDP) f>
May 13 00:49:50 alarm systemd-resolved[344]: Using degraded feature set (UDP) f>
lines 2046-2068/2068 (END)[ 1302.028960] audit: type=1130 audit(1557699855.230:359): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dnsmasq comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1302.048344] audit: type=1131 audit(1557699855.230:360): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dnsmasq comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1302.105771] audit: type=1130 audit(1557699855.310:361): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dnsmasq comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'

ifconfig

 

[root@alarm ~]# ifconfig
br0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.1  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 2a02:120b:c3f6:f671:50ea:a8ff:fe06:b6a  prefixlen 64  scopeid 0x0<global>
        inet6 fe80::50ea:a8ff:fe06:b6a  prefixlen 64  scopeid 0x20<link>
        ether 52:ea:a8:06:0b:6a  txqueuelen 1000  (Ethernet)
        RX packets 722  bytes 408503 (398.9 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 562  bytes 70734 (69.0 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1508
        inet6 fe80::f2ad:4eff:fe09:6a7f  prefixlen 64  scopeid 0x20<link>
        ether f0:ad:4e:09:6a:7f  txqueuelen 1024  (Ethernet)
        RX packets 722  bytes 424387 (414.4 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 582  bytes 76891 (75.0 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 11  

lan0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether f0:ad:4e:09:6a:7f  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lan1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        ether f0:ad:4e:09:6a:7f  txqueuelen 1000  (Ethernet)
        RX packets 722  bytes 408503 (398.9 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 562  bytes 70734 (69.0 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 80  bytes 6320 (6.1 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 80  bytes 6320 (6.1 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wan: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether f0:ad:4e:09:6a:7f  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

What is wrong ?

And have also no Internet

I pluged a FritzBox 5490 with DHCP v6 and v4  to the Wan Port

Shorewall is not running

Hi Joel, and welcome to the forum of armbian (Debian)

 

19 hours ago, Joel Müller said:

with ArchLinux

given the hint above, people here are using Debian and Ubuntu - you seem to use something else