Kernel 5.3.y has just been labelled as EOL which was anyway expected to happen soon and most of our "current" kernels are already at 5.4.y ... Is sunxi/sunx64 ready for this upgrade? 

Don't care about 5.5.y at this moment which means DEV branch can remain as is or if someone out of the regulars take it further.

2 minutes ago, Igor said:

Don't care about 5.5.y at this moment which means DEV branch can remain as is or if someone out of the regulars take it further.

I will spend sometime during next 2 weeks to migrate DEV to @megi 's 5.5.y branch ...

Just now, martinayotte said:

out of the regulars

 I hope we will get some help here once.

Few findings - also with other 5.4.y kernels:

- Orangepi3 = broken network
- Opi Lite crashing wifi

- Teres A64 = doesn't boot / no hdmi ?
- Tinkerboard 5.4.y = no HDMI

1 hour ago, Igor said:

Few findings - also with other 5.4.y kernels:

- Orangepi3 = broken network
- Opi Lite crashing wifi

- Teres A64 = doesn't boot / no hdmi ?
- Tinkerboard 5.4.y = no HDMI

Thanks Igor for the info. i thought i broke my board when the Ethernet stop working after flashing a new image.

3 hours ago, Igor said:

- Orangepi3 = broken network
- Opi Lite crashing wifi

Isn't those problems related to NetworkManager ?

On my board, since I'm using almost every time "old school" /etc/network/interface, I've disabled NetworkManager and I don't have any network issues and boards are up since more than 3 weeks ...

2 minutes ago, martinayotte said:

Isn't those problems related to NetworkManager ?

At least for Opi3 I don't think so:

[   17.213687] dwmac-sun8i 5020000.ethernet eth0: no phy at addr -1
[   17.222692] dwmac-sun8i 5020000.ethernet eth0: stmmac_open: Cannot attach to PHY (error: -19)
[   17.386257] dwmac-sun8i 5020000.ethernet eth0: no phy at addr -1
[   17.395289] dwmac-sun8i 5020000.ethernet eth0: stmmac_open: Cannot attach to PHY (error: -19)
[   17.428555] dwmac-sun8i 5020000.ethernet eth0: no phy at addr -1
[   17.437574] dwmac-sun8i 5020000.ethernet eth0: stmmac_open: Cannot attach to PHY (error: -19)
[   17.466272] dwmac-sun8i 5020000.ethernet eth0: no phy at addr -1
[   17.475285] dwmac-sun8i 5020000.ethernet eth0: stmmac_open: Cannot attach to PHY (error: -19)
[   17.504444] dwmac-sun8i 5020000.ethernet eth0: no phy at addr -1
[   17.513515] dwmac-sun8i 5020000.ethernet eth0: stmmac_open: Cannot attach to PHY (error: -19)

 

4 minutes ago, Igor said:

At least for Opi3 I don't think so:

Ah ! I was using WiFi ... But I just plugged ETH and don't see the issue ... Maybe issue is been introduced later than my 5.4.1 built on Dec 5th ...

59 minutes ago, martinayotte said:

Maybe issue is been introduced later than my 5.4.1 built on Dec 5th ...

Yes, that is possible. 

And one more findings. I used DT found on LE from @jernej and it shows the same symptoms while LibreELEC (2019-12-20) works fine.

Problem is in u-boot. Last known good one: 2019.04

38 minutes ago, Igor said:

Problem is in u-boot. Last known good one: 2019.04

Strange ... My OPi3 build from Dec 5th is using 2019.10 ...

4 minutes ago, martinayotte said:

from Dec 5th is using 2019.10

From master branch? Hmm. Nothing strange is in the commits. 

4 hours ago, Igor said:

From master branch?

Of course !