Skip to content
View in the app

A better way to browse. Learn more.
Armbian Community Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

[RK3308] Rock Pi S 256

RudiO
in Beginners

Featured Replies

Rock Pi S @%^ Mb Ram no WiFi not starting with Armbian. Got this as output

 

Spoiler 

Resetting CPU ...

INFO:    PSCI Power Domain Map:
INFO:      Domain Node : Level 2, parent_node -1, State ON (0x0)
INFO:      Domain Node : Level 1, parent_node 0, State ON (0x0)
INFO:      Domain Node : Level 0, parent_node 0, State ON (0x0)
INFO:      Domain Node : Level 0, parent_node 0, State ON (0x0)
INFO:      CPU Node : MPID 0x0, parent_node 1, State ON (0x0)
INFO:      CPU Node : MPID 0xffffffffffffffff, parent_node 1, State OFF (0x2)
INFO:      CPU Node : MPID 0xffffffffffffffff, parent_node 1, State OFF (0x2)
INFO:      CPU Node : MPID 0xffffffffffffffff, parent_node 1, State OFF (0x2)

DDR Version V1.26
REGFB: 0x00000032, 0x00000032
In
589MHz
DDR3
 Col=10 Bank=8 Row=14 Size=256MB
msch:1
Returning to boot ROM...
Boot1 Release Time: Mar 12 2019 11:59:07, version: 1.12
chip_id:330800,0
ChipType = 0x13, 35791008
DPLL = 1300 MHz
sfc_ver 3
sfc nor id: ff ff ff
sfc_nand_init
DPLL = 1300 MHz
sfc_ver 3
sfc_nand id: ff ff ff
DPLL = 1300 MHz
NeedKHz=200KHz,clock=12000KHz
NeedKHz=200KHz,clock=12000KHz
NeedKHz=200KHz,clock=12000KHz
mmc2:cmd1,20
NeedKHz=200KHz,clock=12000KHz
emmc reinit
NeedKHz=200KHz,clock=12000KHz
mmc2:cmd1,20
NeedKHz=200KHz,clock=12000KHz
emmc reinit
NeedKHz=200KHz,clock=12000KHz
mmc2:cmd1,20
NeedKHz=200KHz,clock=12000KHz
SdmmcInit=2 1
NeedKHz=200KHz,clock=12000KHz
NeedKHz=200KHz,clock=12000KHz
NeedKHz=200KHz,clock=12000KHz
mmc0:cmd5,20
DPLL = 1300 MHz
NeedKHz=24000KHz,clock=650000KHz
DPLL = 1300 MHz
NeedKHz=40000KHz,clock=650000KHz
SdmmcInit=0 0
BootCapSize=0
UserCapSize=15193MB
FwPartOffset=2000 , 0
StorageInit ok = 35754844
SecureMode = 0
Secure read PBA: 0x4
Secure read PBA: 0x404
Secure read PBA: 0x804
Secure read PBA: 0xc04
Secure read PBA: 0x1004
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT 0x330b9c0 signature is wrong
recovery gpt...
GPT 0x330b9c0 signature is wrong
recovery gpt fail!
LoadTrust Addr:0x4000
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x600000, size=0x9d4bc
RunBL31 0x10000
INFO:    Preloader serial: 0
NOTICE:  BL31: v1.3(release):3a579d3
NOTICE:  BL31: Built : 09:09:17, Jan 29 2019
INFO:    Lastlog: last=0x100000, realtime=0x102000, size=0x2000
INFO:    ARM GICv2 driver initialized
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 1
INFO:    plat_rockchip_pmu_init: pd status 0xe b
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x600000
INFO:    SPSR = 0x3c9


U-Boot 2017.09-armbian (Jan 20 2020 - 04:19:49 +0100)

Model: Radxa ROCK Pi S
PreSerial: 0
DRAM:  254 MiB
Sysmem: init
Relocation Offset is: 0f919000
vdd-core init 1044000 uV
MMC:   dwmmc@ff480000: 0, dwmmc@ff490000: 1
Using default environment

In:    serial@ff0c0000
Out:   serial@ff0c0000
Err:   serial@ff0c0000
Model: Radxa ROCK Pi S
Card did not respond to voltage select!
mmc_init: -95, time 9
Card did not respond to voltage select!
mmc_init: -95, time 9
do_rkimg_test: dev_desc is NULL!
Bootdev(atags): mmc 0
MMC0: Legacy, 50Mhz
PartType: DOS
rockchip_get_boot_mode: Could not found misc partition
boot mode: None
CLK: (sync kernel. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
  apll 816000 KHz
  dpll 1300000 KHz
  vpll0 1179647 KHz
  vpll1 903167 KHz
  aclk_bus 185714 KHz
  hclk_bus 100000 KHz
  pclk_bus 100000 KHz
  aclk_peri 185714 KHz
  hclk_peri 100000 KHz
  pclk_peri 100000 KHz
  hclk_audio 98303 KHz
  pclk_audio 98303 KHz
Net:   No ethernet found.
Hit key to stop autoboot('CTRL+C'):  0
Could not find misc partition
ANDROID: reboot reason: "(none)"
load_android_image: Can't find part: boot
Android image load failed
Android boot failed, error -1.
do_boot_rockchip: Could not find mmcsda1 part
Card did not respond to voltage select!
mmc_init: -95, time 9
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
2940 bytes read in 21 ms (136.7 KiB/s)
## Executing script at 00500000
Boot script loaded from mmc 0
125 bytes read in 17 ms (6.8 KiB/s)
"Synchronous Abort" handler, esr 0x96000010
* Relocate offset = 000000000f919000
* ELR(PC)    =   000000000065ca30
* LR         =   000000000065afc4
* SP         =   000000000f508020

* ESR_EL2    =   0000000096000010
        EC[31:26] == 100101, Exception from a Data abort, from current exception level
        IL[25] == 1, 32-bit instruction trapped

* DAIF       =   00000000000003c0
        D[9] == 1, DBG masked
        A[8] == 1, ABORT masked
        I[7] == 1, IRQ masked
        F[6] == 1, FIQ masked

* SPSR_EL2   =   0000000020000349
        D[9] == 1, DBG masked
        A[8] == 1, ABORT masked
        I[7] == 0, IRQ not masked
        F[6] == 1, FIQ masked
        M[4] == 0, Exception taken from AArch64
        M[3:0] == 1001, EL2h

* SCTLR_EL2  =   0000000030c51835
        I[12] == 1, Icaches enabled
        C[2] == 1, Dcache enabled
        M[0] == 1, MMU enabled

* HCR_EL2    =   000000000800003a
* VBAR_EL2   =   000000000ff19800
* TTBR0_EL2  =   000000000fff0000

x0 : 000000000f5312a0 x1 : 0000000019000000
x2 : 000000000000007d x3 : 0000000000000000
x4 : 000000000000007d x5 : 0000000000000000
x6 : 0000000000000000 x7 : 0000000000000000
x8 : 0000000000000044 x9 : 0000000000000008
x10: 000000000f5312b0 x11: 000000000f5291b0
x12: 0000000000000000 x13: 0000000000000200
x14: 000000000f50a1ec x15: 00000000ffffffff
x16: 00000000e65c9a5b x17: 00000000a3c01010
x18: 000000000f510d28 x19: 0000000000000000
x20: 000000000000007d x21: 000000000f5312a0
x22: 000000000ff9fb98 x23: 0000000000000000
x24: 0000000000000000 x25: 000000000000000a
x26: 0000000000000001 x27: 0000000000000000
x28: 0000000000000000 x29: 000000000f508200

SP:
0f508020:  00000000 00000000 00000000 00000000
0f508030:  00000000 00000000 0ff920ff 00000000
0f508040:  00000000 00000000 00000000 00000000
0f508050:  0ff92146 00000000 0ff9216c 00000000
0f508060:  0ff921b9 00000000 0ff92206 00000000
0f508070:  0ff92246 00000000 0ff92286 00000000
0f508080:  0ff922c3 00000000 00000000 00000000
0f508090:  00000000 00000000 0ff92300 00000000
0f5080a0:  0f508200 00000000 0ff19a0c 00000000
0f5080b0:  00000000 00000000 0ff891de 00000000
0f5080c0:  0fff0000 00000000 0800003a 00000000
0f5080d0:  30c51835 00000000 0f508020 00000000
0f5080e0:  20000349 00000000 0ff19800 00000000
0f5080f0:  000003c0 00000000 96000010 00000000
0f508100:  0ff75a30 00000000 0f5312a0 00000000
0f508110:  19000000 00000000 0000007d 00000000


Call trace:
  PC:   [< 0065ca30 >]
  LR:   [< 0065afc4 >]

Stack:
        [< 0065ca30 >]
        [< 0060ecb0 >]
        [< 0061d604 >]
        [< 00611a7c >]
        [< 00611c1c >]
        [< 0061137c >]
        [< 00611930 >]
        [< 0061170c >]
        [< 00611c1c >]
        [< 00611340 >]
        [< 0061cb0c >]
        [< 006063fc >]
        [< 00606504 >]
        [< 0061d604 >]
        [< 00611a7c >]
        [< 00611c1c >]
        [< 0061137c >]
        [< 00611930 >]
        [< 00611c1c >]
        [< 00611340 >]
        [< 0061cba8 >]
        [< 0061d604 >]
        [< 00611a7c >]
        [< 0061170c >]
        [< 0061170c >]
        [< 00611c1c >]
        [< 00611340 >]
        [< 0061cba8 >]
        [< 0061d604 >]
        [< 00611a7c >]
        [< 0061170c >]
        [< 00611c1c >]
        [< 00611340 >]
        [< 0061cba8 >]
        [< 0061d604 >]
        [< 00611a7c >]
        [< 0061170c >]
        [< 0061170c >]
        [< 00611c1c >]
        [< 00611340 >]
        [< 0061cba8 >]
        [< 0061d604 >]
        [< 00611a7c >]
        [< 0061170c >]
        [< 00611c1c >]
        [< 00611340 >]
        [< 0061cba8 >]
        [< 0061d604 >]
        [< 00611a7c >]
        [< 00611c1c >]
        [< 00611340 >]
        [< 0061cba8 >]
        [< 0061d604 >]
        [< 00611a7c >]
        [< 00611c1c >]
        [< 0061137c >]
        [< 00611930 >]
        [< 0061170c >]
        [< 00611c1c >]
        [< 00611340 >]
        [< 0061cba8 >]
        [< 0061d604 >]
        [< 00611a7c >]
        [< 00611c1c >]
        [< 00611340 >]
        [< 0061cb0c >]
        [< 0060fd48 >]
        [< 00612810 >]
        [< 00650680 >]
        [< 00612a20 >]
        [< 0060193c >]

Copy above stack info to a file(eg. dump.txt), and
execute command in your U-Boot project: ./scripts/stacktrace.sh dump.txt

 

 

Edited by TRS-80
add spoiler and code tags

  • TRS-80 changed the title to [RK3308] Rock Pi S 256

NOTE: I originally found this thread in RK3399 subforum, but according to https://wiki.radxa.com/RockpiS this device is RK3308 based, so I moved it and added that tag to the title.

 

@RudiO,

 

Welcome to the forums!

 

Because this board is currently unsupported, I moved it to P2P section, because I don't think you have access to Development area (and I'm not sure it is really yet under any kind of development anyway).

 

Good luck!

Edited by TRS-80
add welcome and move things around

Guest
This topic is now closed to further replies.
Go to topic listing

Account

Navigation

Search

Search

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.