Skip to content
View in the app

A better way to browse. Learn more.

Armbian Community Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

no boot after upgrade && activate hdmi output

Featured Replies

Hi all,

 

got a hummingboard i4-pro installed with armbian debian vanilla.

After 

apt-get update && apt-get upgrade

system won't come up again. Anybody else?

 

How to activate hdmi output for debugging? Am I the only one?

 

Even more: 

 

Got a BlueBeach mini PCI-e SATA 2-ports controller, recognized as:

  01:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02) (prog-if 01 [AHCI 1.0])Subsystem: ASMedia Technology Inc. Device 1060

but my attached harddrive (2,5", separate psu) will not be assigned as /dev/sdX

 

Any idea where to start to troubleshoot?

 

Thanks a lot guys

me too. I have Orange Pi One. Yesterday try "apt-get update && apt-get upgrade" from desktop version Armbian 5.10.

After I type reboot in console Orange turn off and when I plug adapter it doesnt boot, on board light up only diods in RJ45 connector

today I try new image 5.13, it work, but when it booting there was errors: buffer I/O error and emmc(somethink text) error

Ok I understand that the half-size mini-PCI-E port is only for pci-based cards.

 

At the back/bottom the mSATA port is working with my mSATA 32GB SSD.

 

Now I got another 2-port MiniPCIE card fitting into the bottom mSATA port, which is described as a MiniPCIE card. It's not working too, obviously because the other way round the mSATA port does not understand miniPCIE cards. https://www.amazon.de/gp/product/B00ORXQY2E/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

 

Ain't there any mSATA or miniPCIE card with 2-SATA ports that work on hummingboard?

 

I just wanted to connect 2 SATA hard disks and do mdraid.

 

And still, Armbian_5.10_Cubox-i_Debian_jessie_4.5.2 will not boot after 

apt-get-update && apt-get upgrade

I can't be the only one ?? It's 100% reproducable.

I can't be the only one ?? It's 100% reproducable.

 

I found out what is happening but don't know where exactly is a problem yet. MMC0 become MMC1 and if you correct boot parameters and fstab it will boot. 

 

Ain't there any mSATA or miniPCIE card with 2-SATA ports that work on hummingboard?

 

In theory this or similar in the top mini PCI slot:

http://www.dx.com/p/iocrest-io-mpce1061-2i-mini-pci-express-sata-3-0-controller-card-green-383391#.V1Mjh_l97AQ

I FINALLY FOUND   :o   :lol:

 

For all who are looking for a Dual-SATA Mini PCI-E adapter for attaching two harddisks to the Hummingboard i4-pro, THIS adapter is the ONLY one (out of ~8 tested adapters) WHICH WORKS:

 


 

I'm german, so I got no english/international amazon link.

Unfortunately the product has no "real name" - even the driver cd nor the manual tells a brand name.

But if the amazon link will die someday, here's the lspci -v output:

 



01:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASMedia Technology Inc. Device 1060
Flags: bus master, fast devsel, latency 0, IRQ 155
I/O ports at 1020 [size=8]
I/O ports at 1030 [size=4]
I/O ports at 1028 [size=8]
I/O ports at 1034 [size=4]
I/O ports at 1000 [size=32]
Memory at 01100000 (32-bit, non-prefetchable) [size=512]
[virtual] Expansion ROM at 01200000 [disabled] [size=64K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [78] Power Management version 3
Capabilities: [80] Express Legacy Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Kernel driver in use: ahci


 

currently running armbian jessie legacy. I will try it on vanilla too.

Damn am I happy , just wanted to share :D

Guest
This topic is now closed to further replies.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.