Off-topic

<prompt> "Talk to me about it." <claude> Good question, because the honest answer has layers, and most of the "8K" in the ads lives in only one of them. What's real: the decoder. The RK3588's video engine (RKVDEC2) really does decode 8K: HEVC and VP9 at 8K@60, H.264 and AV1 at 8K@30, in silicon. That's not marketing. It's the same block Deep Ink talks to for our 4K HDR work, and 8K is just more macroblocks through the same pipe. So "8K video decoding" is a true statement about the chip. Where it thins out: the display. The VOP2 display controller's big port (VP0) tops out at 8K@30 or 4K@120, and here's the nugget: those are the same number. …

Now the picture is complete, and it's better news than the September note suggested. Three things in Firefox's own code: 1. There's a fallback chain already, and it's three deep. CreateTexture tries zero-copy import first; if that fails it has CreateTextureViaCopyYUV for NV12 and CreateTextureViaCopyP010 for 10-bit. 2. Those fallbacks already use the external-texture machinery — the exact mechanism a whole-frame import needs: aGLContext->fBindTexture(LOCAL_GL_TEXTURE_EXTERNAL, srcTex); aGLContext->fEGLImageTargetTexture2D(LOCAL_GL_TEXTURE_EXTERNAL, mEGLImage[aPlane]); So Firefox can bind a dma-buf as an external texture. It just does it …

Hi everyone, I’m sharing an engineering paper about getting a PP-OCRv6-based RapidOCR pipeline running on the Orange Pi Zero 3W’s Allwinner A733 / Vivante VIP9000 NPU, integrated into Visual AI. Full paper: https://github.com/sog777/orange-pi-zero-3w-rapidocr-npu The tests used the Orange Pi Debian 12 Bookworm image and its vendor NPU stack, not Armbian. This is an engineering case study, not an Armbian support request or a claim that the same binaries work on an Armbian image. The paper covers the ONNX → ACUITY → NBG → VIPLite conversion path, static model shapes, targeted convolution and LayerNorm graph rewrites, quantization, simulator-versus-hardwa…

Selling a fully working Helios64 NAS from Kobol. It has been running continuously since purchase without any issues. Includes 4x Western Digital Red 4TB HDDs (16TB total), all in good health and used only in this setup. All original parts are included: case, power supply, cables, and accessories. Note: the 1GbE Ethernet fix has not been applied. Selling because I recently upgraded to a new NAS. Located in the Netherlands. Pickup possible or shipping within the EU. Contact me for pricing or questions.

In this topic I'll share information from Wi-Fi modules found in SBCs, and their compatibility with WPA3 standard. WPA3-Personal Only (not Transitional or Compatible) Wi-Fi 5 (ac), 6 (ax), 7 (be) on 2.4 and 5 GHz: Authentication and Key Management (AKM): WPA3-SAE with SHA256 (AKM:8, AKM:9 FT), optionally WPA3-SAE with a variable hash algorithm depending on Diffie-Hellman (DH) group SHA-256, SHA-384, or SHA-512 (AKM:24, AKM:25 FT) Key derivation methods: Hunting and Pecking (HnP) or Hash-to-Element (H2E) Pairwise cipher (PTK): CCMP-128, optionally GCMP-256, others possible but not TKIP Group data cipher (GTK): CCMP-128, opt…

Made some power consumption tests of different USB-Ethernet 2.5G, 1G and 100M dongles. Test bed: Orange Pi Zero3 with 480 MHz CPU speed locked, connected to the PC over UART, Armbian 26.11.0-trunk.30 6.18.48-current-sunxi64 AVHzY CT-3 for power consumption monitoring Intel I226-V as another Ethernet side First I set a baseline Orange Pi consumption with USB Host enabled. The absolute minimum I could get is with a Logitech radio keyboard dongle plugged in — 0.934 W. Then I plugged in USB-Ethernet adapters and recorded its idle power consumption without cable connected, idle power with cable and En…

Hello ! I just finished modifying the Rockchip U-Boot bootloader to make it possible to boot Android OS from NVMe SSD. If anyone needs this, here is the complete tutorial: https://github.com/MarusGradinaru/NanoPi-M5-Android-NVMe

I'm older and not much time allowed to "F" off. I used to spend time in my late 30's On Q3A InstaUnlagged. I'm using AI The best I can to do the things I dont have time for. I bought a OP5b before our house flooded and then I started AI for geneology.. went f'n amazing... Family came here from France in 1624. In 1924 there was a commemorative coin and 2 stamps celebrating my family and other French and Belgium Huguenots working the American Dream, with religious freedoms... Then a book about our Family's farm in Central Park. An artist hired to painting of the description of the farm.. So I bought the coin, the two stamps, the painting, the book and the French Bible that…

(sorry for bad english) this box is heavily locked down i want to install armbian for emuelec on it but no support and no root but luckily it can local update throught sdcard/usb i just want to watch kodi, play emulation games does any one have the android tv firmware for this box? specs ( if needed): 1g ram 4g rom cpu fake allwinner h313 ( high chance is h3 because uses mali 400 mp2 and armv7a i checked on aida64) android 9

I want to get an sbc to make personal server running website with backend for me, so basically JS, Python, and other stuff. I also want to connect my microcontrollers like esp32 to make my custom smart home system, by using camera. Maybe i also could use AI to analize the image. I found one Banana pi M3(2gb ram) for under 10$, so i am thinking whether to buy it. I feel like the deal is great since i can't find other sbcs with such hardware, ram to be specific, but i heard that software support is bad. Is that true for now? Or is it usable? I am also thinking of getting Orange pi one plus(1gb ram), but it costs more and also has less ram. What shoul…

Hello, Could anybody provide plans/recommendations about Armbian and Orange Pi CM4 board? Thanks in advance.

Hello averyone I'm trying to download the multitool.img.xz can someone please help me find it or share a valide link?

In one post here I saw a "please buy hardware we recommend" quote, and I appreciate that, but I wasn't able to find a recommended boards list - is there even one? Or should I just use the standard/platinum support filtering on the main page? Anyway, I could also use some help / recommendation for a general purpose SBC as I ... didn't by one for years. I'm looking for a more recent SBC to run a small, low power server (think pihole, homeassistant, zigbee, etc). I don't have specific requirements, but I'd like the board to have some kind of "long term support" and I'd also like to choose something that the armbian team would recommend, maybe from a manufacturer …

Hi all, I'm running DietPi on an Orange Pi Zero 3 (H618, sunxi64), which repackages the Armbian current-sunxi64 kernel. I use a USB DVB-T2 dongle (HanfTek Astrometa RTL2832P, VID/PID 15f4:0131) with tvheadend for over-the-air TV. After a routine update the dongle stopped working entirely, and I tracked the root cause down to missing kernel modules. ## Problem Starting from kernel 6.18.x (package linux-image-current-sunxi64 version 26.05.0-trunk-dietpi1 and all subsequent builds through dietpi5), the following modules are absent from the kernel package: - dvb_usb_v2 - dvb-usb-rtl28xxu - dvb_core …

Hi everyone, I am developing an industrial system using a Raspberry Pi 5 (Raspberry Pi OS Bookworm). Because it is deployed in an environment with abrupt power cutoffs, I am facing an issue where the default pink and white splash screen randomly reappears during boot, overriding my configuration. Here is what I have already implemented to prevent this: Disabled Splash Screen: Added disable_splash=1 to /boot/firmware/config.txt. Read-Only File System: Enabled the native Overlay File System via raspi-config to protect the boot and root partitions from corruption. Industrial Hardware: Tested with high-end storage to rule out basic SD card degradation…

Hi everyone, I'm running a small application on an Armbian-based SBC and need a reliable SMTP Service Provider for sending notifications and transactional emails. I've been comparing a few options, including iDealSMTP, Mailgun, and SMTP2GO. For those hosting services on Armbian devices, which provider has worked best in terms of deliverability and ease of configuration? Any tips or experiences would be appreciated. Thanks!

Orange Pi 5B subforum has recurring threads about eMMC boot loops, WiFi/Bluetooth regressions on mainline kernels, and the general "what image actually works on this thing" question. Joshua-Riek's ubuntu-rockchip was a common answer to that for a long time, but it was archived recently. This is a personal continuation fork in case it's useful to anyone working through those same issues. What this is: - Fork of Joshua-Riek/ubuntu-rockchip (archived) — same vendor 6.1 kernel base, not mainline - Therefore: onboard WiFi/BT works (no mainline driver regressions), eMMC boots reliably - Scope: Orange Pi 5B + Ubuntu 24.04 (Noble) only. jammy/oracular/plucky suite conf…

Working with Claude.AI I have Joshua's kernel updated and cherry picked to have latest security fix. I have it on my Orange Pi 5b, on the Emmc. running 24/7, burn test, 4k video for screen saver. widevine in Vivaldi and chromium/Visual Studio Flicker fix. I am waiting on new Antennas to arrive for Bluetooth check. Currently hosted on Private Github, working towards public consumption. I'll let the AI tell the story. defcom5

I just build the build the driver for my RTL8188FTV that supported by rtl8188fu. It works as wifi hot spot but has some problems with nmcli . I share what is done and I hope it be useful for others. 0. Install dkms , make and git: apt install dkms make git 1. Remove any existing source and dkms config for module : dkms remove rtl8188fu/1.0 --all rm -f /lib/firmware/rtlwifi/rtl8188fufw.bin rm -f /etc/modprobe.d/rtl8188fu.conf rm -r /var/lib/dkms/rtl8188fu 2. Get current kernel version and install matching headers: uname -a My results are: Linux orangepipc 5.10.21-s…

Hi everyone, I’m working on an RK3568-based platform (Yocto build, Rockchip BSP) and I’ve reached a blocker regarding OP-TEE / Trusted Application (TA) development. Anyone knows how to get RK3568 + Linux + OP-TEE source/build path Rockchip vendor SDK with RK3568 OP-TEE source a repo showing rk3568 + optee_os + TA dev kit for Linux

As someone not familiar with all the ins and outs of GPL specifically, how does GPL in the armbian/build project play with userpatches? Is it expected that a commercial hardware device using Armbian would need to open-source the customize-image.sh script? Thanks!

Hi, No sure if this is the place to post this but here it goes. I use the Debian distro for my armbian deployments. Every time I deploy, and the system comes with systemd-resolved it gives me problems. I always have to remove it and use the /etc/resolv.conf file by it self. I would suggest removing this, it's not necessary or useful. -Cheers

Hello everyone, I'm looking on how to get patched boot.img from this firmware: https://disk.yandex.ru/d/10ARWp8CEpWr_Q It is Z1 se android box with h313 chip and 2/16 gb ram What i tried is: magisk latest apk (unsupported) If anyone could help me,my telegram account is: @jasmin8111

Hi everyone! I'm obviously new here, and I simply wanted to give my profile a picture, but failed to find that option in the "profile > account settings". I assume it's easy, and to be honest I like to take the time to ask a real person here. Is there an option to upload an avatar image? Thank you!

In the past (2019) there was no chance to use the A64-CPU Jide Remix Mini with armbian, because of a blocked -u-boot But today I found a site (from February 2025 on github) https://github.com/r4nd3l/revived_remix_mini_pc?tab=readme-ov-file which can make the Closed Jide Remix Mini to boot from SDCard with a modified u-boot There at the github page is a modified u-boot and a modified A64 armbian for the Jide Remix Mini. Jide did leave us with a closed/blocked device AT this time the 16GB emmc isnt useable, but using SDCard is a start for upcycling the Jide Remix Mini

The update from the "armbian.com/beta" repository has not been working for quite some time now. Repositories are broken, sizes in InRelease do not match sizes in subbranches. Mirror synchronization has been going on for about a week now?!

Hello, i'm trying to make Arch work on my H3, it boots to uboot, loads fine and says RAM size and reads /boot/boot.scr, but when it tries to ext4load something it gives a error of ` ** fs_devread read error - block` and ` ** No partition table - mmc 0`, everything after `321 bytes read in 24 ms (33.2 KiB/s)` loads by arrays of pixels, i never seen these before on Armbian, H3Droid or any other img file. [ EDIT ] Turns out, U-Boot defaults to 400000hz on SD card while saying its mode is SD High Speed (50MHz), i still cant fix the issue...

I've noticed that since yesterday the `server` Armbian images disappeared from the product pages. Example: https://www.armbian.com/radxa-rock-5-itx/ I can no longer see them. Is it a bug, or something expected from now on. I also noticed the https://armbian.chi.auroradev.org/dl/rock-5-itx/ folder is empty.

Hi I have an RK3566 board with a Unisoc UWE5621DS wifi/BT chip on it. I have had a number of kernels running on this board (4.19.209 BSP, 6.0 mainline, 6.1-rc1 mainline) but the wifi is a problem. I noticed that there is an Orange Pi 5.17 kernel that includes a driver for UWE5622. I'm not sure how close 5621DS is to 5622 Also I think that this kernel is meant for the Orange Pi 4 which has an RK3399, whereas I have RK3566. Anyone any thoughts on what is most likely to work?

I find this forum very interesting. There's a lot of useful information here.

Yesterday I did start to install armbian trixie iot on my Pinebook. Second part in debian - after the u-boot) starts, but then the Pinebook shuts off, because of a low battery(?) I did charge the whole day and powered off in the evening. Today the Pinebook stand on my table with a swollen battery. I removed it and happily it doesnt crash anything else than the battery holder. But now it doenst boot up complete like with a low battery. After the u-boot debian trixie does boot , but at the middle of the messages it does shutdown Can it run completly without battery? I have normally a 5V/2Ah power-supply connected and that did work the las…

Hi, I’m working on enabling I²S audio output using a PCM5102 DAC on an Orange Pi Zero 2W (SoC: Allwinner H618) running Armbian_community_25.11.0-trunk.334_trixie_current_6.12.47_minimal. Despite several tests and rebuild attempts, I haven’t been able to obtain any sound output from the I²S interface. Below is a summary of what has been done so far. Hardware setup Board: Orange Pi Zero 2W SoC: Allwinner H618 DAC: PCM5102 (I²S input, analog stereo output) Connections: I2S0 → used for DAC (pins LRCK, BCLK, DIN, GND, 3.3V) Confirmed pin mappings according to H618 documentation and available DTS files. OS Image: Armb…

Hi I'm looking to emulate an industrial device such as eWon or ESA router by using an sbc with dual eth and tailscale/headscale. What is the best and cheapest board? better if with a decent chassis. I'm interested in something like nanopi Rx or orangepi Rx. Any idea? thank you

DDR d5483af87d cym 23/11/23-16:15:24,fwver: v1.15 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB Manufacturer ID:0x0 ch:0 dq0 fail,write:0x1,read:0x0 ch:0 dq1 fail,write:0x2,read:0x0 ch:0 dq2 fail,write:0x4,read:0x0 ch:0 dq3 fail,write:0x8,read:0x0 ch:0 dq4 fail,write:0x10,read:0x0 ch:0 dq5 fail,write:0x20,read:0x0 ch:0 dq6 fail,write:0x40,read:0x0 ch:0 dq7 fail,write:0x80,read:0x0 ch:0 dq8 fail…

Recently, first when updating the OrangePi 3B, and now the BananaPi M2 Ultra, the /ect/os-release file, *PRETTY_NAME=*trunk.XXX*, has stopped updating correctly. XXX doesn't change and doesn't match the current value. (rolling release)

Hi everyone, I got my OrangePi Zero 2W to work with MAX98357A board, the violet one, but I can only hear one channel. I didn't modify ALSA much, just focused on DTS: ... fragment@1 { target-path = "/soc"; __overlay__ { ahub0_plat: ahub0_plat { #sound-dai-cells = <0>; compatible = "allwinner,sunxi-snd-plat-ahub"; apb_num = <2>; /* for dma port 5 */ dmas = <&dma 5>, <&dma 5>; dma-names = "tx", "rx"; playback_cma = <128>; capture_cma = <128>; tx_fifo_size = <128>; rx_fifo_size = <128>; tdm_num = …

Hi there, i just noticed that the link which should explain how to enter Maskrom Mode on the Tinkerboard S https://www.armbian.com/tinkerboard/ does not point to the Wiki but to a site for an online Casino. Seems that tinkerboarding.co.uk does not exist anymore. Maybe someone could remotve that link.

Hi, I'm looking a newer armbian iso image which contains those futures. Is there any link? I'm going to test on Turing RK1 (RK3588) machine. Regards.

I have followed this guide for Firefly SDK Buildroot and I am unable to get the shell on uart2(ttyS2) or fiq-debugger port. I have checked multiple blogs, tickets, and forums, and edited .dts and .dtsi to: Disable fiq-debugger and use uart2 as shell Disable uart2 and enable fiq-debugger (default file mode) Route fiq-debugger to uart 0x00 by editing serial ID and other configs to use uart2 (ttyS2) …but I am unable to get shell access on console. I am a beginner in this, so I apologize in advance as I feel there might be a small issue I am unable to identify. Here are the relevant files/content: rk3568-linux.dtsi …

Hi Armbian folks, I’m new to the forum and joined today (07:42 PM CEST, July 20, 2025). I’ve recently started playing around with single-board computers, like an Orange Pi 5 I set up with Armbian a while back—it’s been a fun challenge! I’m based in Poland and enjoy tinkering with tech in my spare time. I’d love to hear what brings you all here—any cool hobbies or projects you’re working on? I’m thinking of trying something simple like a media server or smart home setup, but I’m open to ideas. What do you enjoy doing with your SBCs or other gear? Looking forward to chatting with you!

Hii this is my first post

Why can I not sign in with GitHub ?

I have seen many Wifi Benchmarks for speed only and not for reliability. I stopped doing wifi benchmarks for speed since i get very different values for the same board a few hours later,. For real life projects reliability and availability is what matters when you depends solely in wifi network. I would strongly suggest @tkaiser to include "reliability" in his tests, maybe a new thread. As for example you can try iperf with -t 1000, -t 2000, -t 3000 and -t 10000 (if it allows?). Try this with your board and see what happens...

Hi all, If anyone is interested, I have a Helios64 backup battery pack lying around that I did order back in the day, but never got around to installing/using it. (Have a separate UPS.) From my guess this thing is <6 years old, but again, never seen any charge or discharge. PM me when interested. Groetjes, PS Available for pickup in the San Jose, Bay Area, CA (USA) or can send domestically thru USPS.

Please help, I've tried everything.

WOW, I was really unhappy when I saw this, just goes to show you not to trust even projects like ARMBIAN on where they will connect to from your network, advise before anyone finds themselves in trouble having to explain why some of these connections..... I was downloading Armbian image and then got a warning that I couldn't connect to site called "FOREVER PIRATES" and became concerned... You can read it yourself... https://imgur.com/a/IQyzlvr

I’ve been rocking a Solidrun clearfog base with Armbian for ~10 years now as my home router and was very happy with it until a few months ago when the newer software updates began to break it. I think the software support is beginning to rot due to not many users and thus no push to maintain it. I figure it’s time to start looking for a replacement. I have a Rock 5 ITX that could do it but I’ve been trying to keep it on the vendor kernel so it can transcode in hardware for Jellyfin - but that vendor kernel has issues reliably detecting the SATA controllers - and I don’t want to have to reboot my router multiple times to get the hardware to work after applying …

So, For a project I'm looking into a logger/monitor SBC attached to an automotive device with CAN bus to solve customer issues more easily. I rather not fuzz around with (deeply) embedded stuff and keep options open (e.g. wireless connectivity/sensors). Like the old and trusty H3, preferably low-voltage, cheap and stable, no AI required or Armbian support. Any recommendations?

Hello, If I compile the mainline kernel after a make -j2 Bananapi_defconfig Will I get a suitable kernel or am I obliged to use ARMbian build script ? The question behind is, I'm testing Arch on several (unsupported) SBCs at customers requests, and on the BananaPI-M1, the HDMI is not working, on the OrangePI PC2, both the network and eMMC don't work. Obviously, everything is perfectly working on my ARMbian boxes 😄 Thanks

I have an odroid xu4 and want to thank you for the great work ... _ _ _ /_\ _ _ _ __ | |__(_)__ _ _ _ / _ \| '_| ' \| '_ \ / _` | ' \ /_/ \_\_| |_|_|_|_.__/_\__,_|_||_| v25.2.2 for Odroid XU4 running Armbian Linux 6.6.75-current-odroidxu4 Packages: Debian stable (bookworm) IP addresses: (LAN) IPv4: 192.168.178.24 IPv6: fd0b:5278:d32e:0:1d4d:933a:afcc:c02 (WAN) 188.136.105.135 Performance: Load: 1% Up time: 27 days 5:26 Memory usage: 4% of 1.94G CPU temp: 47°C Usage of /: 5% of 29G storage/: 3% of 234G Tips: Support our crowdfunding project https://forum.armbian.com…

Hey all, Selling my Helios64 as I've recently upgraded my server if anyone is looking. Fully built, original condition with all drive bays and screws. Sadly no original packaging, seem to have discarded that for some reason and it has been sitting in direct sunlight so has a slither of fading on the top but still working away fine up until a few days ago. Drop me a PM if you're interested or are looking to get some pics. Given it's size and weight I'd only be looking to ship this within the UK, possibly mainland Europe at a push. Thanks

For example, what is the name of the two 2GB DDR 4 ram on the nanopi neo3 board?

I'm selling my Helios 64 with original box and small parts. Apart from a few attempts, it's basically a new one. The modification for the network interface was made. If you interested please send me a PM. Thanks

I logged in to the Armbian forums today, for the first time in a long time. I got a message that I had to confirm my email. I didn't capture a screenshot and the screen is now gone. I promptly received an email, subject: We've Missed You! Your Account is Active Again. This had some details of my recent access and: "If this was you, please ignore this email. Otherwise, you should secure your account immediately." There was a button: Review Activity & Secure Account. I clicked that button. A page opened with the message: Oops! The page you are trying to access is not available to guests, but may be available if you sign in. …

Downloaded the latest build Armbian_25.2.1_Orangepi5_bookworm_vendor_6.1.99_minimal.img Cloned the git repo for rtl88x2bu Built the new module with cd /usr/src/linux-headers-6.1.99-vendor-rk35xx/arch/ ln -s arm64 aarch64 cd /rtl88x2bu make KVER=6.1.99-vendor-rk35xx -j8 make KVER=6.1.99-vendor-rk35xx install modprobe 88x2bu.ko Looked at dmesg, and I see that it gives a message that the kernel is tainted and the module will not load. No working wifi. This same procedure worked fine with the 6.1.75 kernel of a previous release.

So first I want to change my Armbian STB IP settings to Static with the command source /etc/network/interfaces.d/* #Network is managed by Network manager #auto lo #iface lo inet loopback auto eth0 iface eth0 inet static address 10.10.10.10 subnetmask 255.255.255.0 gateway 10.10.10.1 broadcast 10.10.10.255 hwaddess ether MAC Address and i save the setting when i reboot the config i cant access the IP address in SSH nor CasaOS Web UI. i need help

I can't even imagine the amount of work involved on both sides of the (debian) development fence, as well as the admins, mods, community contributors, ..., here, that help make Armbian a viable SBC (ARM) whatever OS. -and here's to RISC-*, and let it not be too encumbered. My "Armbian_24.11.1_Odroidc4_noble_current_6.6.60-kisak.img" works very well on my lowly Odroid-C4. I don't know your names, but Thankyou all.

Hey everyone, I am a tech lover with a passion for single board computers & opensource projects. I want to exploring the capabilities of Armbian and want to share insights on optimizing performance for various applications. I want to learn as well as start my own conversation to answer my question and learn more. If there are any posts or resources that are suggested for new users. Please share with me. I am grateful. 😊

See https://www.collabora.com/news-and-blog/news-and-events/rockchip-rk3588-upstream-support-progress-future-plans.html

Hi all, seeking some assistance kinder stuck on this. So i have managed to install it on Rocky Linux 9 ok with "dnf install wireguard-tools" configured it fine and upto nearly last step however stuck here trying to start with "systemctl start wg-quick@wg0" getting this error: [root@localhost ~]# sudo systemctl start wg-quick@wg0 Job for wg-quick@wg0.service failed because the control process exited with error code. See "systemctl status wg-quick@wg0.service" and "journalctl -xeu wg-quick@wg0.service" for details. When I check sudo journalctl -u wg-quick@wg0 I see this: Starting WireGuard via wg-quick(8) for wg0... Dec 08 00:…

Is it possible to perfrom CSI data extraction using nexmon tool happens in the following phones with the respective firmware patches given below and how? Samsung Galaxy S22 Plus - 20_82_42_sta (r994653) Google Pixel 7 and 7 Pro - 20_101_36_2 (r994653) and 20_101_57 (r1035009) Google Pixel 8 - 24_671_6_9 (r1031525)

uptodated today, jammy on bpi-m5 running 3d printer with klipper etc. With snapd frozen, so is firefox. possible fix? passwd f-u, I am that other contributing member but finally got it reset.

I've run some sysbench (v0.4.12) tests. More will come later as I will get Raspberry Pi 3 Model B+ and Orange Pi RK3399. Banana Pi = ARMv71 A20 @ 960 MHz (not sure about current clock, not overclocked) Banana Pi Armbian (2 cores, 2 threads) - 1 thread - 1057 events in 60 seconds, which gives 17.62 events per second Banana Pi Armbian (2 cores, 2 threads) - 2 threads - 2003 events in 60 seconds, which gives 33.38 events per second i7-8700K @ 4.7 GHz VM with Mint 18.3 x64 in VirtualBox on Windows 10 (4 cores, 4 threads) - 1 thread - 10000 events in 4 seconds, which gives 2500 events per second i7-8700K @ 4.7 GHz Mint 18.3 x64 stand-alon…

just want ask is Wanke Cloud NAS is use armbian? I bought this thrift item

Hi Armbians Maybe some of you already wanted to put your SBC in a professional data center and operate it as a standalone server for DNS, VPN, Tor, or whatever. That is exactly why I have put together a huge list of worldwide DC provider options, that are willing to colocate SBC‘s. It could certainly be of interest to one or the other. Check my list here: *** SBC colocation/ SBC hosting worldwide provider megalist ***

I followed the steps outlined in the instructions, and they worked very well for me with (10 ISPs) 4G dongles using PPP connections. TV Box Model tested: MXQ Pro 4K, 5G (H3 Allwinner), ISO: Sunvell 69. I started with Debian 10 and later upgraded to Debian 11. I also use a second USB 3.0 LAN card, as well as the dongles connected through a USB hub with an independent power supply. For more information, you can check the following resources: Installing the Perl dependencies took some time. Net-ISP-Balance Documentation https://lstein.github.io/Net-ISP-Balance/ Net-ISP-Balance GitHub Repository https://github.com/lste…

neither apt nor snap will update firefox, apt says possible mirror update in progress. snap refresh or snap list says its current. Call me puzzled. Which do I uninstall??? .

I have 40 huge Chinees tablets for product configuration but the company wont react anymore. Tablets/ half pc Currently runs on Android 7 on the device is it possible to have LAN connection, 3x USB, Simcard slot, SD reader on and off button. And have 1080p touchscreen. What are the he possibilities can it run on windows, chrome os newer versions of Android ?

Banana Pi BPI-M5 Pro adopts the second-generation 8nm high-performance AIOT platform Rockchip RK3576, with a 6 TOPS computing power NPU and support for up to 32GB of large memory. It supports 8K video encoding and decoding, offers rich interfaces including dual gigabit Ethernet ports, WiFi 6 & BT5, and various video outputs. Compatible with multiple operating systems, it is suitable for ARM-based PCs, edge computing devices, personal mobile internet devices, and other digital multimedia applications. Key Parameter SoC: Rockchip RK3576 CPU: Integrated with four Cortex-A72 cores @ 2.2GHz and four Cortex-A53 cores @ 1.8GHz, along with a…

Hello! I wish to make my OrangePi 'failsafe' in regards of spontaneous power losses and such, so I need to have it running write protected, with writes going to a special partition or just RAM. My searches yielded an 'ancient' way to freeze the root filesystem using overlayroot, which isn't supoprted anymore (https://docs.armbian.com/User-Guide_Advanced-Features/) As I think that this kind of 'headless embedded usage' is an usual scenario for SBC running Armbian and having seen there was a method for doing so before, I assume there probably is a popular modern method for doing so, but I couldn' find it. How would I do this with the…

Hi all, One question here. I am making an electronic design that was previously completed by a third party. It has a Raspberry Pi Zero 2W attached, an Ethernet controller module based on the ENC28J60, and an RJ45 connector. Here the Ethernet controller module is similar to the GeeekPi ENC28J60 Overlays HAT V1.02 board. Added: ENC28J60 's Main Specs ref: https://www.kukelec.com/products/ENC28J60-I--SS.html The issue is that the Raspberry Pi is unable to establish a network connection via Ethernet, as the ENC28J60 chip is not even recognized. I have checked the Raspberry Pi’s configuration, and it is correct and consistent with the chosen SPI pins. While …

Hi guys, I want to ask, how to reset ARMbian to reset factory default during fresh install because i can't find it in armbian config Thanks

Hi, Curious if there's something like Intel ME that I can use to control my PC and use as a coprocessor when booted, maybe if it had a Coral TPU or something. I remember hearing something about a RPi CM4 base board that has a PCIe connector that can plug into a 1x or 2x slot. (Don't remember exactly which one.) Thanks in advance. edit: Also. Use it for GPIO and serial ports.

Hello Everyone 🤗, I'm not too familiar with Armbian or ARM-based platforms in general. I'm working on an endeavour that calls for creating a unique kernel module, thus any advice or materials you could offer would be really helpful. This is a quick synopsis of the assignment and the difficulties I'm having: Project Synopsis: I'm using Armbian Buster on an Orange Pi 4. My objective is to create a unique kernel module that communicates with a particular piece of hardware—a temperature sensor attached to the I2C bus. The module's job is to read sensor data and provide user-space applications with access to it. Actions To Date: K…

Hello there, This is my first post after just joining this discussion, so please forgive me and provide kind assistance if I have posted to the wrong subsection! As a new member in this forum and wish to share and gain some knowledge. I am looking forward to create my own discussion to resolve my query and gain some knowledge though I have taken part in various discussion which is definitely helped me a lot. Also in what category should be taken depends on what factors? Thankyou in advance.

Yesterday I did get a new little Bluetooth-Speaker, but without AUX - I rechecked some Bluetooth-Commands. But could never connect, because the Pi missed the protocol A2DP - which was only available with PulseAudio as Bluetooth-Module So I used my 2nd OrangePi One with USB-Bluetooth-Dongle and mainline-kernel for this challenge: ARMBIAN 5.38 stable Debian GNU/Linux 9 (stretch) 4.14.18-sunxi Linux opi-one-main 4.14.18-sunxi #24 SMP Fri Feb 9 16:24:32 CET 2018 armv7l GNU/Linux I like ALSA more than PulseAudio - I searched for ALSA and Bluetooth-Audio - and did found no good news about Audio and Bluetooth while using ALSA. At the second sea…

I'm running Armbian on my ARM-based single-board computer, and I would like to create a bootable live image from my current installation. This way, I can use the image to boot other devices with the same configuration, software, and customizations that I've set up on my current system. I've looked through the Armbian documentation, but I couldn't find a straightforward guide on how to accomplish this task. Can someone please provide step-by-step instructions on how to create a bootable live image from my current Armbian installation? Ideally, I'd like to be able to create an image file (e.g., .img or .iso) that I can write to a USB drive or an SD card, making it…

Hello all, I had diet-pi on my rock64 for the last few years but recently decided to install armbian debian community maintained firmware. Everything is working fine but I seem to get a new core fw on an almost daily basis (armbian-bsp-cli-rock64-current) and the board needs to be rebooted each time. An I using the wrong repo or is this normal? Should i consider running stock debian instead of armbian?

Please tell me how to install IMX462 MIPI CAMERA so that it is recognized by NAS SDK 3588. Since I am a beginner, I cannot configure DTS or create a driver. I need help. Linux ARM Kernel Architecture - Patchwork I think there is a patch related to imx462 here, but I don't know how to use it. Please tell me how to use it.

Hi, I've been looking around for an Arm development platform. Banana Pi seems to be about the best value for money. I've been looking around at some TV boxes. However, I see mixed opinions about these being a option. SBCs seem to be almost twice the price of similar spec Arm TV box. Processing power and memory are mostly my priorities. Anything over 4GB seems insanely expensive. I can do SMD soldering work. So modding at TV box is an option. Are there any options for an 8gb Octa core system that isn't going to cost more than a decent PC?

As a beginner in the system I intend to do is how to start the construction of a Wifi Vending Machine operated by coinslot call in philippines is PESO WIFI. Maybe someone is working on it these are samples of the appearance between client and admin side. Client Portal: Admin side:

Hello Armbian Forum! I hope you are all well. It's been more than 5 years since I last visited here, a lot of things has changed in my life since then. I saw my posts complaining about apt speed, that I could get 200kbps speed, now I am building +200gbps infrastructures for tens of thousands of servers. I felt a little bit of nostalgia visiting this forum because of that. And here I am, just I wanted to say hi! I hope you all also had a great time in the last 5 years just like me.

We are well aware that our download pages are no perfect and generally there is always room for improvements, so we are constantly trying to improve them. Better UX and useful information saves time. Help us saving your time! Things like: https://armbian.atlassian.net/browse/AR-2363

Hi, I developed this app just while having a look at django + angular -> https://github.com/vijaygill/wg-ui-plus I thought of sharing it with open-source communiity which has given me a lot! It allows me to have finer control over what a given VPN client can access (using IP Tables rules - managed by the code itself) I hope somebody finds it useful. It is comes as docker image (published on every push to dev / master) so updates are quite frequent for now due to tweaks / fixes. I developed it on an Orange Pi 5+ running on Armbian . The LIVE instance is running on a Raspberry Pi. …

Hi. I'm using armbian 24.05 Ubuntu jammy xfce 30. I've downloaded Arduino ide 1.8 for arm32 Linux. I replaced original Arduino due bossac with custom bossac for udoo in Arduino due Tools in order to make ide see atmel sam3xe on udoo, but bossac didn't find it. I've tried super user access and chmod on bossac and on ttyxmc (internal Arduino due programming seirla port) With old armbian build it worked, but now not. Cheers

Hello everyone! I'm compiling firmware for orangepizero3，then you want to customize the bootlogo. I tried to replace my bootlogo with armbian-logo-png in xx, but the compiled firmware did not change, so I would like to ask you how to modify it My compile command:./compile.sh BOARD=orangepizero3 BRANCH=current BUILD_DESKTOP=yes BUILD_MINIMAL=no DESKTOP_APPGROUPS_SELECTED='browsers multimedia' DESKTOP_ENVIRONMENT=xfce DESKTOP_ENVIRONMENT_CONFIG_NAME=config_base KERNEL_CONFIGURE=no RELEASE=bookworm PLYMOUTH=yes build

Newbie Using LinuxMint 21.3 I have been searching for answer to below question, and have been referred to UserSpace as it may have an answer. Referral from greg kh on Linusfoundation org. Question: Linux Mint 21.3 Using LibreCalc With USB RFID tag readers, (2 or more reader) most enter direct into open focus spreadsheet. However with no device number. Have same pid and vid. As the read from USB tag goes to the spreadsheet, can the device number eg 03 and the bus number eg 004 (either or both) be appended to the data read, into the spreadsheet. This would enable spreadsheet identify each reader and its location, to manipulate the tag …

Recently I've bought small box which is kind if "wireless interface" for wired AA: https://www.aliexpress.com/item/1005006001314624.html It works quite nicely with my Ford S-Max but I'm very curious man and got it open (aka teardown). Chips cannot be identified, they lack any marks. But there is DEBUG UART First I connected it into my PC. Removable disk appeared with a few files that keeps my phone's BT address and such information. Nothing really interesting. Then I powered up device when holding the button, it didn't start but went into some "flashing mode" I think - it was identified as USB\VID_1F3A&PID_EFE8 which means sunxi SoC OTG connector in FE…

Didn't know this thing was ever going to see the light of day: https://www.aliexpress.com/item/Lichee-Pi-Zero-1GHz-Cortex-A7-512Mbit-DDR-Development-Board-Module-Mini-PC/32931418720.html I see the original board outline is still there, but it grew a bit of a waistline A valid question is why, and I'm not sure, nor will I buy it, just thought it interesting that it popped up. With complete kernel support for VDEC/VENC/ camera this is actually somewhat interesting, so maybe some people would like to play with it. I'm sure @Icenowy knows more than is humanly possible about the capabilities and whether it's worth talking about.

Hello ... I'm seeking for any device(s) with RTL8189FTV and RTL8211E chips. It's does not matter "what it is" ... (old unneeded, broken one, etc.- or any kind of trash) I have one damaged OPI Zero Plus and I can back it into the life ... now actually work and boot, but ETH and WIFI chips are burned. I'm in Slovakia .... Thanks

I am a developer from China and am not very familiar with English, so the following content is translated through Google Translate. When I successfully flash the image file of the built system onto the development board, the system seems to delete the directory under /home upon the first boot (from my observation). The build command being used ：./compile.sh build BOARD=firefly-rk3399 BRANCH=current BUILD_DESKTOP=no BUILD_MINIMAL=yes KERNEL_CONFIGURE=no RELEASE=focal This is an excerpt from customize-image.sh. Main() { case $RELEASE in stretch) # your code here # InstallOpenMediaVault # uncomment to get an OMV 4 image ;; buster) # your c…

I have IQAir AirVision pro and i'm try to reverse engineer it it uses uboot sunxi (allwinner) was following this video according to video i need to know where flash chip is mapped in to memory then use md print whole firmware then used https://github.com/nmatt0/firmwaretools/blob/master/parse-uboot-dump.py to convert to firmware as he used bdinfo to get address (which is not present), what i do? Is there any way through which i can extract frimware from device? (like using FEL Mode) also found https://github.com/zador-blood-stained/h3-fel-mass-storage is it possible do same on Allwinner A33 logs…

Any reason why even after being registered for a month and having validated my email, I still cannot see any posts in any of the topics on this entire forum? For some reason it was just a mobile phone issue.

Hi All, I am looking for the steps to build custom Linux preferably OpenWrt distro (otherwise Ubuntu or any other distro should be fine at this moment) for Orange Pi R1 H3. I searched it in https://www.armbian.com/download/?device_support=Community maintained&tx_maker=xunlong for the same. But did find anything for Pi R1 H3 board. Thanks in advance for helping me... Warm regards, Manoj

The minimal (Bookworm) torrent of Orange Pi PC2 was only shared by one source when I added it today, and that source is only at 71%. Not sure if this is another person also trying to download and the original source no longer shared, or if this is the original source and it is broken. I can ofc download the file via https, but felt I wanted to let you know.

Hi folks, I upgraded my server towards a bigger machine and unfortunately neither my parents nor brothers need a reliable fileserver. So this little machine goes on sale. - Helios64 with all trays + 2 SSD inserts - Fully assembled - Original packaging - Changed the two fans for Noctuas in order to get an even more silent server What's missing is the Battery for UPS. Mine was faulty and caused me some random reboots. Condition is mint / very good. System is stable with 5.15.93 running OMV6. If you would like pictures of the machine itself please drop me a note.

Hello guys, After seeing a friend bought and tried a Raspberry Pi 5 device, I am very excited about what can be done with such a small single-board computer. So now I'm interested in getting a suitable single-board computer to buy. What SBC is suitable to buy if I want to use virtualization sofware such as VMware ESXi for ARM? Running multiple OS at once, is my mainly use. Getting used to Intel CPU & Windows and now I want to switch to ARM and Linux environment. Thanks in advanced.

This does not look good... Did someone forget to renew the certificates?

Instruction on how to use wireless WoL (Wake on LAN) using RTL8189FS example in Armbian 23.x Bookworm (This wireless WIFI adapter is installed in Oprange Pi Lite/Oprange Pi Plus(2E)/Orange Pi Zero Plus/Oprange Pi PC Plus/Oprange Pi 2/etc...) 1. First of all we need to change the device tree configuration file dts file for our single board. The point is that for most WIFI drivers for SDIO interface there is a normal configuration of single board wake-up via interrupt and therefore there is no need to go into dts. In the driver for RTL8189FS (aka RTL8189FTV) there is NO such feature as "host-wake" interrupt and we will have to make small changes to wake up the…