Hello everybody,

the images from armbian for my Orange Pi 3 work very fine and stable.

Thank you for that.

 

I came to armbian by links form orangepi.org.

When I tried to get an Android image from there I got
an Xutuntu image. (https://drive.google.com/drive/folders/1Urh9-yljq9Mrrafp7ZWRVf_s_AdjUoTQ)

 

Do you know where to get an Android for my Orange Pi 3?

 

Thanks if you have information for me about that.

 

 

 

 

You can download board specific images from :

http://www.orangepi.org/downloadresources/

Also if you only need the Android Image, you can download the official orange pi build from :

https://drive.google.com/drive/mobile/folders/1Urh9-yljq9Mrrafp7ZWRVf_s_AdjUoTQ?usp=drive_open

EDIT:

Are sure you used the correct file?

The image provided by the link you mentioned, is 383 Mb, and no other orange pi's official linux image has a size equal to that

So go double check the file you used/extracted

 

On 3/30/2020 at 2:11 PM, rauscharm said:

Hello everybody,

the images from armbian for my Orange Pi 3 work very fine and stable.

Thank you for that.

 

I came to armbian by links form orangepi.org.

When I tried to get an Android image from there I got
an Xutuntu image. (https://drive.google.com/drive/folders/1Urh9-yljq9Mrrafp7ZWRVf_s_AdjUoTQ)

 

Do you know where to get an Android for my Orange Pi 3?

 

Thanks if you have information for me about that.

 

 

 

 

Also, note that OrangePi Android images cannot be flashed to microsd cards with a simple Etcher or WinImager (or whatever it was called). You need to use PhoenixCard v4.1.2 I'll type that out again; 4.1.2. I know, google tells you that the latest version of PhoenixCard is 3.1.x, but you can find the 4.1.2 from orangepi's site somewhere, I forgot exactly where. At least for me, the 3.1.x did NOT work at all. Once I found the v4.1.2 everything worked. 

Edited March 31, 20206 yr by Anna Vahtera
typo

Hi,

thanks for your reply.

I found 2 PhoenixCard V4.1.2. When open them, I can see buttons but they are blank.

It's on Windows 10. I also tried it on a Windows 10 in a virtual machine both had the same appearance with most of nothing. :-)

How can you use it?

 

P.S. the Xubuntu that started was from emmc, as I think the pi did not boot the "Andriod Card" so first I thought I burned the wrong image.

 

 

I got the PhoenixCard v4.1.2 straight from OrangePi.org, from their download folders, here: https://drive.google.com/drive/folders/1Vh2H14q9GDyfTdepVOIfAlrVjVZ_FM2A

I'm using Windows 10 too and I didn't have any problems with it.  I don't know if it needs the latest dotNET or no, but might be worth to see if both 3.x and 4.x are of the latest version.

 

Other than that, I can't really help since it's working on my computer without problems.

PhoenixCard_V310_20130618 worked fine for my OrangePI Lite2 (same H6 cpu)...

On 3/31/2020 at 2:08 AM, Localhost said:

You can download board specific images from :

http://www.orangepi.org/downloadresources/

Also if you only need the Android Image, you can download the official orange pi build from :

https://drive.google.com/drive/mobile/folders/1Urh9-yljq9Mrrafp7ZWRVf_s_AdjUoTQ?usp=drive_open

EDIT:

Are sure you used the correct file?

The image provided by the link you mentioned, is 383 Mb, and no other orange pi's official linux image has a size equal to that

So go double check the file you used/extracted

 

 

I can install the Android 7 on Orange Pi 3 but there are no google store, and everytime i try to run Netflix/Youtube or other program, it said