Hi guys,

i've the following problem in my attempt to customize/study armbian:

- succesfully compiled Armbian_5.17_Bananapim2_Debian_jessie_4.8.0 on Ubuntu 16.04 with default config;

- burned image on SD card, (on the same card burned with Armbian_5.14_Bananapim2_Debian_jessie_4.6.2_desktop and the system boot is ok)

 

- the board enter in this reset loop:

U-Boot 2016.07-armbian (Sep 11 2016 - 10:06:05 +0200) Allwinner Technology

 

CPU:   Allwinner A31s (SUN6I)

Model: Sinovoip BPI-M2

DRAM:  1 GiB

MMC:   SUNXI SD/MMC: 0

*** Warning - bad CRC, using default environment

 

HDMI connected: Setting up a 1680x1050 dvi console (overscan 0x0)

In:    serial

Out:   vga

Err:   vga

Net:   data abort

pc : [<7ef5f708>]          lr : [<00000000>]

reloc pc : [<4a001708>]    lr : [<cb0a2000>]

sp : 7af36f7c  ip : 7efabe89     fp : 00000017

r10: 7efab885  r9 : 7af3dee8     r8 : 000040a0

r7 : 7ef9ee14  r6 : 00000000     r5 : 00000001  r4 : 00000000

r3 : 0000000f  r2 : 00000001     r1 : 00000000  r0 : ea00000e

Flags: nzCv  IRQs off  FIQs off  Mode SVC_32

Resetting CPU ...

 

resetting ...

 

what's wrong ?

 

cheers

rt1k

 

 

No idea, try some older u-boot. Image from download section is working fine .. use it and just install kernel which you just compiled. Leave u-boot as is.

 

We are just finishing a new release and I'll check where is the problem on the way.

 

Thanks for reporting in.

Hi Igor,

just for your reference this is the boot msg with u-boot 2016.05 (Linux bananapim2 4.6.2-sunxi #13 SMP Sun Jun 19 16:22:09 CEST 2016 armv7l GNU/Linux)

 

many thanks for your work and support.

 

regards.

rt1k

 

------------------

U-Boot SPL 2016.05-armbian (Jun 20 2016 - 14:41:50)

DRAM: 1024 MiB

Trying to boot from MMC1

 

 

U-Boot 2016.05-armbian (Jun 20 2016 - 14:41:50 +0200) Allwinner Technology

 

CPU:   Allwinner A31s (SUN6I)

Model: Sinovoip BPI-M2

DRAM:  1 GiB

MMC:   SUNXI SD/MMC: 0

HDMI connected: Setting up a 1680x1050 dvi console (overscan 0x0)

In:    serial

Out:   vga

Err:   vga

Net:   eth0: ethernet@01c30000  <--------- here !!!!

starting USB...

USB0:   USB EHCI 1.00

USB1:   USB OHCI 1.0

scanning bus 0 for devices... 5 USB Device(s) found

Hit any key to stop autoboot:  0

=>

 

Boots fine on recent U-boot 2016.09