Hey all, 

So recently I got myself an Orange Pi Prime so I could attempt to do some SPI flashing through spidev and flashrom.

I have been going at it, set up the board, got an actually decent power supply, and set up everything. 

Eventually I got myself into the steps of setting up the pins for spi use. 

At first, I used armbian-config to enable the spidev into /boot/armbianEnv.txt

then I added param_spidev_spi_bus=0 into armbianEnv.txt 

I rebooted and the spi device file still doesn't show up, any ideas?

I have:

went through armbian-config (System -> Hardware -> spi-spidev)

added param_spidev_spi_bus=0 to armbianEnv.txt

I even decided to read up on dtb files and dts overlays and decompiled my sun50i-h5-spi-spidev.dtbo file

manually went ahead and "enabled" the spi devices by editing the dtbo file, recomplied it, and moved them into /boot/dtb/allwinner/overlays/sun50i-h5-spi-spidev.dtbo

nothing.

thank you for your time.

armbianEnv.txt

Providing logs with 

armbianmonitor -u

 helps with troubleshooting and significantly raises chances that issue gets addressed.

10 hours ago, Werner said:

Providing logs with 

armbianmonitor -u

 helps with troubleshooting and significantly raises chances that issue gets addressed.

I honestly have no idea how the pastebin/ghostbin stuff works, but here goes:

https://ghostbin.com/LSQZy

 

Please let me know if this is good. Thank you.