Hi, I checked the hardware with older installation (with LCD and non I2S-Audio) and WLAN is working.

bananapi@lemaker ~ $ uname -a
Linux lemaker 3.4.103 #4 SMP PREEMPT Thu Dec 18 12:55:58 CST 2014 armv7l GNU/Linux
bananapi@lemaker ~ $ lsmod
Module                  Size  Used by
sunxi_spdma             4796  1
sunxi_spdif             6481  1
sunxi_sndspdif          3405  0
sndspdif                3047  1
ft5x_ts                42276  0
ap6210                584133  0
mali_drm                2608  0
drm                   209226  1 mali_drm
mali                  111427  0
ump                    52415  1 mali
bananapi@lemaker ~ $

bananapi@lemaker ~ $ cat /proc/asound/cards
 0 [sunxicodec     ]: sunxi-CODEC - sunxi-CODEC
                      sunxi-CODEC  Audio Codec
 1 [sunxisndspdif  ]: sunxi-sndspdif - sunxi-sndspdif
                      sunxi-sndspdif
bananapi@lemaker ~ $ iwconfig
lo        no wireless extensions.

tunl0     no wireless extensions.

wlan0     IEEE 802.11  Access Point: Not-Associated
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  invalid crypt:0  invalid misc:0

eth0      no wireless extensions.

bananapi@lemaker ~ $

A.

Try this kernel. I add the driver and recompile:
 

http://mirror.igorpecovnik.com/test/linux-image-banana_4.3_armhf.deb

 

It will remain in future upgrades. Use it with default Bananapro FEX.

 

I hope we fixed the problem now. 

Try this kernel. I add the driver and recompile:

 

http://mirror.igorpecovnik.com/test/linux-image-banana_4.3_armhf.deb

 

It will remain in future upgrades. Use it with default Bananapro FEX.

 

I hope we fixed the problem now. 

 

Thanks! But how should I use it? It's not an image for SD-card.

Sorry!

 

A.

Use latest and install this kernel over. dpkg -i xxxxx.deb

Hi Igor! It works! I use the ap6210 driver.

Last login: Mon Sep  7 22:04:05 2015

Load: 0.19, 0.22, 0.10 - Board: 42.7°C - Memory: 954Mb

root@bananapi:~# iwconfig
lo        no wireless extensions.

tunl0     no wireless extensions.

wlan0     IEEE 802.11  ESSID:"xxxxxxxx"
          Mode:Managed  Frequency:2.412 GHz  Access Point: xx:vv:yy:zz:dd:vv
          Bit Rate=65 Mb/s   Tx-Power:32 dBm
          Retry min limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off

eth0      no wireless extensions.

bond0     no wireless extensions.

root@bananapi:~# uname -a
Linux bananapi 3.4.108-banana #8 SMP PREEMPT Sun Sep 6 20:18:29 CEST 2015 armv7l GNU/Linux
root@bananapi:~#

root@bananapi:~# lsmod
Module                  Size  Used by
bnep                   14462  2
cpufreq_userspace       3524  0
ap6210                624553  0
a20_tp                  3365  0
8021q                  18593  0
garp                    6072  1 8021q
stp                     2032  1 garp
llc                     5365  2 stp,garp
sunxi_ir                4037  0
hidp                   17640  0
rfcomm                 58686  0
bt_gpio                 2741  0
wifi_gpio               6375  1 bt_gpio
hci_uart               25000  0
bluetooth             264185  12 bnep,hidp,hci_uart,rfcomm
spidev                  6366  0
root@bananapi:~#

Now I have to test the Audio and LCD.

 

 

Thanks!

A.

hey igor what do you change? i ran in same problem with dan-3.4.108 kernel

His kernel doesn't have this driver build in by default. Either use my kernel or add this patch:

 

https://github.com/igorpecovnik/lib/blob/second/patch/kernel/wireless-bananapro.patch

 

It used to be, but then it was removed:

https://github.com/dan-and/linux-sunxi/commit/53d8c2caa8955d00d609beee073f0e14ec253a11

https://github.com/EddyBeaupre/ap6210this the same as yours? i applied this an run a build dts is much easier, the only thing that not work is mali

I took that patch from Lemaker kernel source and they probably fork it from Eddy. I didn't check.

 

Mali is not working, sun4i (A10) breaks, we need an extra gmac patch, ... I already start to prepare an alternative 3.4 branch, starting from linux-sunxi. I need to fix few patches, ... i'll put up this week no matter how far I will come.