Hi. I'm trying to use GPIO's of OrangePi PC+ and after install WiringOP, when I run the gpio readall, all my GPIO's Mode are showing OFF. I tryed enable in armbian-config, but I have only pps-gpio and w1-gpio, I tryed enable both but doesn't work too. Someone knows some solution? Thanks.

You don't need to install anything. This is a script I use on a very similar device:

 

#!/bin/bash
task(){
	gp=$1
        [[ ! -d /sys/class/gpio/gpio${gp} ]] && echo ${gp} > /sys/class/gpio/export
        echo "out" > /sys/class/gpio/gpio${gp}/direction
        echo "0" > /sys/class/gpio/gpio${gp}/value
        sleep 10
        echo "1" > /sys/class/gpio/gpio${gp}/value

}

task "$1"

 

doing this.

More info:

https://www.google.com/search?q=sunxi+gpio

Hi Igor, thanks for your answer, but I tried it too (not your script yet, but commands export, direction, value in /sys/class/gpio). I don't know why doesn't work.

Edited August 15, 20224 yr by vinicius

  

 +------+-----+----------+------+---+OrangePiH3+---+------+----------+-----+------+
 | GPIO | wPi |   Name   | Mode | V | Physical | V | Mode | Name     | wPi | GPIO |
 +------+-----+----------+------+---+----++----+---+------+----------+-----+------+
 |      |     |     3.3V |      |   |  1 || 2  |   |      | 5V       |     |      |
 |   12 |   0 |    SDA.0 |  OFF | 0 |  3 || 4  |   |      | 5V       |     |      |
 |   11 |   1 |    SCL.0 |  OFF | 0 |  5 || 6  |   |      | GND      |     |      |
 |    6 |   2 |      PA6 |  OFF | 0 |  7 || 8  | 0 | OFF  | TXD.3    | 3   | 13   |
 |      |     |      GND |      |   |  9 || 10 | 0 | OFF  | RXD.3    | 4   | 14   |
 |    1 |   5 |    RXD.2 |  OFF | 0 | 11 || 12 | 0 | IN   | PD14     | 6   | 110  |
 |    0 |   7 |    TXD.2 |  OFF | 0 | 13 || 14 |   |      | GND      |     |      |
 |    3 |   8 |    CTS.2 |  OFF | 0 | 15 || 16 | 0 | OFF  | PC04     | 9   | 68   |
 |      |     |     3.3V |      |   | 17 || 18 | 0 | OFF  | PC07     | 10  | 71   |
 |   64 |  11 |   MOSI.0 |  OFF | 0 | 19 || 20 |   |      | GND      |     |      |
 |   65 |  12 |   MISO.0 |  OFF | 0 | 21 || 22 | 0 | OFF  | RTS.2    | 13  | 2    |
 |   66 |  14 |   SCLK.0 |  OFF | 0 | 23 || 24 | 0 | OFF  | CE.0     | 15  | 67   |
 |      |     |      GND |      |   | 25 || 26 | 0 | OFF  | PA21     | 16  | 21   |
 |   19 |  17 |    SDA.1 |  OFF | 0 | 27 || 28 | 0 | OFF  | SCL.1    | 18  | 18   |
 |    7 |  19 |     PA07 |  OFF | 0 | 29 || 30 |   |      | GND      |     |      |
 |    8 |  20 |     PA08 |  OFF | 0 | 31 || 32 | 0 | OFF  | RTS.1    | 21  | 200  |
 |    9 |  22 |     PA09 |  OFF | 0 | 33 || 34 |   |      | GND      |     |      |
 |   10 |  23 |     PA10 |  OFF | 0 | 35 || 36 | 0 | OFF  | CTS.1    | 24  | 201  |
 |   20 |  25 |     PA20 |  OFF | 0 | 37 || 38 | 0 | OFF  | TXD.1    | 26  | 198  |
 |      |     |      GND |      |   | 39 || 40 | 0 | OFF  | RXD.1    | 27  | 199  |
 +------+-----+----------+------+---+----++----+---+------+----------+-----+------+
 | GPIO | wPi |   Name   | Mode | V | Physical | V | Mode | Name     | wPi | GPIO |
 +------+-----+----------+------+---+OrangePiH3+---+------+----------+-----+------+

The physical pin is 16, GPIO 68. Running the script, nothing happens passing with params 68.

 

 

Edited August 15, 20224 yr by vinicius

Solved! With BC547 transistor...

Edited August 26, 20224 yr by vinicius

what do you mean?

On 8/26/2022 at 9:47 PM, vinicius said:

Solved! With BC547 transistor...