February 27, 20233 yr Hi, I just downloaded the newest release of Armbian and flashed into the SD card, it boots up fine from the SD Card. But I wanna install the system into the Samsung PM9A1 SSD, So I followed the instruction on the armbian page, partioned the drive and made a ext4 filesystem. but I got stuck when I tried to boot up from SSD. I hooked up a serial cable and got this information Any idea about this?
February 28, 20233 yr Author Hi, I solved this problem by editing the `boot.cmd` file under /boot I checked `/boot/armbianEnv.txt` and got nothing wrong, but the `boot.cmd` still uses the old `mmcblk0p1` which is not correct. After I edited it and compiled it to boot.scr, and the system finally boots up normally again!
March 1, 20233 yr Quote I checked `/boot/armbianEnv.txt` and got nothing wrong, but the `boot.cmd` still uses the old `mmcblk0p1` which is not correct. After I edited it and compiled it to boot.scr, and the system finally boots up normally again! Odd, my boot.cmd file has setenv rootdev "/dev/mmcblk0p1" yet boots just fine from nvme, without sdcard of emmc installed. How did you create boot.scr from boot.cmd? Found it! # Recompile with: # mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr Edited March 1, 20233 yr by lurk101 addition
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.