March 30, 20233 yr I downloaded "Armbian Lunar XFCE desktop" image from https://www.armbian.com/tinkerboard-2/ and mounted it to the SD card. Then I booted the board but it couldn't boot. Only the red LED is on. The tinker os can boot and work well. The red LED is on and the green LED keeps blinking. How could I do to boot Armbian on this board? Edited March 30, 20233 yr by 蒙金
April 26, 20233 yr I have similar problem on the Tinkerboard 2S. I think this is due to the boot loader using a 'security' feature. Watching on the UART output gives : DDR Version 1.27 20211018 set center 1.0V [...] Boot1 Release Time: Jun 13 2022 09:58:34, version: 1.28 CPUId = 0x0 ChipType = 0x10, 631 mmc_set_bus_width: 1 EmmcClk: 375KHZ EmmcClk: 375KHZ mmc_set_bus_width: 8 EmmcClk: 200000KHZ [...] find part:uboot OK. first_lba:0x4000. find part:trust OK. first_lba:0x6000. LoadTrust Addr:0x6000 [...] LoadTrust Addr:0x7c00 mmc0:cmd18,0 mmc0:cmd12,0 mmc0:cmd18,0 mmc0:cmd12,0 Addr:0x6000 No find trust.img! LoadTrustBL error:-3 SecureMode = 0 SecureInit read PBA: 0x4 SecureInit read PBA: 0x404 SecureInit read PBA: 0x804 SecureInit read PBA: 0xc04 SecureInit read PBA: 0x1004 SecureInit read PBA: 0x1404 SecureInit read PBA: 0x1804 SecureInit read PBA: 0x1c04 SecureInit ret = -2, SecureMode = 0 I think "No find trust.img!" and the following "LoadTrustBL error:-3" explains the boot problem. I am going to fig this more. Maybe someone knows more about this boot-loader.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.