March 14, 20242 yr Hi I was trying out Armbian_24.2.1_Odroidn2_bookworm_current_6.6.16_cinnamon_desktop.img.xz and its not booting when you have a usb hdd connected. It works pefectly fine on bullseye image. Also tryed some other hdd on usb Board variant: n2-plus Net: dunac_neson8b ethernet@ff3f0000: Can't get reset: -2 ethe: ethernet@ff310000 Hit any key to stop autoboot: 0 starting USB... Bus usb@ff500000: Register 3000140 MbrPorts 3 Starting the controller USB XHCI 1.10 scanning bus usbeff500000 for devices... unable to get device descriptor (error-1) WARN halted endpoint, queueing URB anyway. Unexpected XHCI event TRB, skipping... (f0f719c0 00000000 13000000 04008400) the https://paste.armbian.com/peromuzibi is the bullseye one.
March 14, 20242 yr Out of curiosity, does it boot when you drop in my firmware build? dd bs=512 seek=1 conv=notrunc,fsync if=odroid-n2-plus/u-boot-meson.bin of=/dev/${entire-device-to-be-used}
March 16, 20242 yr Author What device ${entire-device-to-be-used}. Do i put here /dev/zram1: LABEL="log2ram" UUID="f669e3f4-c37a-47e0-9427-9839ee24afeb" BLOCK_SIZE="4096" TYPE="ext4" /dev/mmcblk1p1: LABEL="armbi_root" UUID="de04b6b8-a4ac-493b-bee1-92d2eaff5ff0" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="586ce220-01" /dev/zram0: UUID="9a68dd65-2939-47d0-a8a7-cb19f1afe9d8" TYPE="swap" /dev/sda is externe ubs its pluged out otherwise no boot
March 16, 20242 yr 49 minutes ago, Christian Willemsen said: What device ${entire-device-to-be-used}. Do i put here If the microSD card in the microSD card slot is the one with the Armbian_24.2.1_Odroidn2_bookworm_current_6.6.16_cinnamon_desktop.img.xz then it is: dd bs=512 seek=1 conv=notrunc,fsync if=odroid-n2-plus/u-boot-meson.bin of=/dev/mmcblk1 It is always the NAME that lsblk enumerates with the TYPE "disk".
March 16, 20242 yr 22 minutes ago, Christian Willemsen said: it worked OK, then you're now on this version and it's not a general issue, it's about how Armbian's firmware is built.
March 16, 20242 yr My guess would be this patch; https://github.com/armbian/build/blob/main/patch/u-boot/v2022.10/meson64-boot-usb-nvme-scsi-first.patch But if its a spin up HDD, it could be PREBOOT and it isn't able to spin up the drive in time and halting the boot process.
March 16, 20242 yr 1 hour ago, c0rnelius said: My guess would be this patch Quite possible, because due to my migration to bootstd, this entire code block no longer exists for me.
July 31, 20242 yr Just thought I'd let you all know I ran into this same issue. Had to manually (un)patch U-Boot and build from source.
August 28, 20242 yr I have same issue on Armbian_24.8.1_Odroidn2_bookworm_current_6.6.47_minimal When usb-hdd is connected odroid cannot boot. Odroid spins hdd than restarts.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.