Skip to content
View in the app

A better way to browse. Learn more.

Armbian Community Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

[Cubieboard2] [kernel 4.9.7-sunxi & uboot 2017.01-armbian] not possible to boot on SD

Featured Replies

Hi,

With current cubieboard2 image on SD class 10,

local@solo:~$ time sudo dd if=/tmp/Armbian_5.25_Cubieboard2_Debian_jessie_next_4.9.7.img of=/dev/sdb bs=4k
326656+0 enregistrements lus
326656+0 enregistrements écrits
1337982976 octets (1,3 GB) copiés, 317,544 s, 4,2 MB/s

 

 

not possible to boot on cubieboard2.

Please find following log

 

=> =>
U-Boot SPL 2017.01-armbian (Feb 02 2017 - 02:16:44)
DRAM: 1024 MiB
CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
Trying to boot from MMC1

U-Boot 2017.01-armbian (Feb 02 2017 - 02:16:44 +0100) Allwinner Technology

CPU:   Allwinner A20 (SUN7I)
Model: Cubietech Cubieboard2
I2C:   ready
DRAM:  1 GiB
MMC:   SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
SCSI:  SATA link 0 timeout.
AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part ccc apst
Net:   eth0: ethernet@01c50000
Hit any key to stop autoboot:  0
6944 bytes read in 170 ms (39.1 KiB/s)
scanning bus for devices...
Found 0 device(s).

Device 0: not available
starting USB...
USB0:   USB EHCI 1.00
USB1:   USB OHCI 1.0
USB2:   USB EHCI 1.00
USB3:   USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 2 USB Device(s) found

USB device 0: unknown device
ethernet@01c50000 Waiting for PHY auto negotiation to complete.. done
Speed: 100, full duplex
BOOTP broadcast 1
DHCP client bound to address 192.168.15.2 (4 ms)
*** Warning: no boot file name; using 'C0A80F02.img'
Using ethernet@01c50000 device
TFTP from server 0.0.0.0; our IP address is 192.168.15.2
Filename 'C0A80F02.img'.
Load address: 0x42000000
Loading: T T T T T T T T T T
Retry count exceeded; starting again
missing environment variable: pxeuuid
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/01-02-c5-06-42-04-4b
Speed: 100, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C0A80F02
Speed: 100, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C0A80F0
Speed: 100, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C0A80F
Speed: 100, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C0A80
Speed: 100, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C0A8
Speed: 100, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C0A
Speed: 100, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C0
Speed: 100, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C
Speed: 100, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-sunxi
Speed: 100, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm
Speed: 100, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default
Speed: 100, full duplex
*** ERROR: `serverip' not set
Config file not found
Speed: 100, full duplex
BOOTP broadcast 1
DHCP client bound to address 192.168.15.2 (3 ms)
Using ethernet@01c50000 device
TFTP from server 0.0.0.0; our IP address is 192.168.15.2
Filename 'boot.scr.uimg'.
Load address: 0x43100000
Loading: *
CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7 | VT102 | Déconnecté |

 

 

 

 

 

Thanks in advance for your help

Guest
This topic is now closed to further replies.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.