Hello everyone,

First of all, sorry for my poor English.

Quick description of my problem:

I need to install OMV on Orange Pi Plus 2E's EMMC.

At the beginning I used the image of the following URL：

http://simplenas.com/download/other/orange-plus

But it is clear that this image is prepared for Orange pi plus，I successfully installed this

image to Orange Pi Plus 2E and successfully run on the TF card, but when I  cloned image

to the EMMC , it can not start.

then i used the armbian image of the following URL：

https://www.armbian.com/orange-pi-plus-2e/

i install OMV by apt-get,but webui failed to start after Reboot.

at last I found a  link in the OMV official forum :

http://kaiser-edv.de/tmp/NumpU8/

But unfortunately this link does not contain image for Orange Pi Plus 2E EMMC

I downloaded the  image for orangepi zero, but it can not run on Orange Pi Plus 2E EMMC.

Will armbian official can provide a OMV image for Orange Pi Plus 2E EMMC?

thanks a lot!

Sorry for my poor English again!

Here you go

 

1. https://docs.armbian.com/User-Guide_Getting-Started/#how-to-prepare-a-sd-card
2. OMV_3_0_72_Orangepiplus2e_3.4.113.7z
3. https://docs.armbian.com/User-Guide_Getting-Started/#how-to-install-to-emmc-nand-sata-usb

This will only work with Etcher to burn the OS image and then nand-sata-install later to transfer to eMMC. And if you're finished please provide the output from 'sudo armbianmonitor -u' in this thread.

Thanks for your help!

I have successfully started image from EMMC under your guidance.

The following is output from 'sudo armbianmonitor -u' 

root@orangepiplus2e:~# armbianmonitor -u
Network/firewall problem detected. Please fix this or upload /var/log/armhwinfo.log manually.
/var/log/armhwinfo.log has been uploaded to http://sprunge.us/YHNX