Skip to content
View in the app

A better way to browse. Learn more.
Armbian Community Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Asus tinker board help find missing RPi-Monitor parameter

Tido
in Tinkerboard

Featured Replies

Hi,

 

I am looking for owners of RK3288 who can help to find missing information in the system.

A lot already works from the template. Vcore has been added thanks to @TonyMac32  , but some important information like RAM frequency (dynamic.5.name=dram_frequency) is still missing.

This is my adjusted version, but to do some more HW testing we need as much information about the board as possible.

Spoiler 

web.page.icon='img/logo.png'
web.page.menutitle='RPi-Monitor  <sub>('+data.hostname+')</sub>'
web.page.pagetitle='RPi-Monitor ('+data.hostname+')'

web.status.1.name=Raspberry Pi
web.statistics.1.name=Raspberry Pi

web.addons.1.name=Addons
web.addons.1.addons=about

include=/etc/rpimonitor/template/version.conf
include=/etc/rpimonitor/template/uptime.conf
include=/etc/rpimonitor/template/memory.conf
include=/etc/rpimonitor/template/swap.conf
include=/etc/rpimonitor/template/sdcard.conf

########################################################################
# Extract CPU information
#  Page: 1
#  Information               Status     Statistics
#  - cpu frequency           - yes      - no
#  - cpu voltage             - yes      - yes
#  - cpu load 1, 5, 15       - yes      - yes
#  - cpu scaling governor    - yes      - no
########################################################################
dynamic.1.name=cpu_frequency
dynamic.1.source=/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
dynamic.1.regexp=(.*)
#dynamic.1.postprocess=$1/1000000
dynamic.1.postprocess=sprintf("%.3f", $1/1000000)
dynamic.1.rrd=GAUGE

dynamic.2.name=load1,load5,load15
dynamic.2.source=/proc/loadavg
dynamic.2.regexp=^(\S+)\s(\S+)\s(\S+)
dynamic.2.postprocess=
dynamic.2.rrd=GAUGE

dynamic.3.name=scaling_governor
dynamic.3.source=/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
dynamic.3.regexp=(.*)
dynamic.3.postprocess=
dynamic.3.rrd=

dynamic.4.name=cpu_count
dynamic.4.source=grep -c processor /proc/cpuinfo
dynamic.4.regexp=(.*)
dynamic.4.postprocess=
dynamic.4.rrd=GAUGE

dynamic.5.name=dram_frequency
dynamic.5.source=/sys/devices/platform/sunxi-ddrfreq/devfreq/sunxi-ddrfreq/cur_freq
dynamic.5.regexp=(.*)
dynamic.5.postprocess=sprintf("%.3f", $1/1000000)
dynamic.5.rrd=GAUGE

dynamic.6.name=soctemp
dynamic.6.source=/etc/armbianmonitor/datasources/soctemp
dynamic.6.regexp=(.*)
dynamic.6.postprocess=sprintf("%.1f", $1/1000)
dynamic.6.rrd=GAUGE

#dynamic.7.name=externaltemp
#dynamic.7.source=/tmp/externaltemp
#dynamic.7.regexp=(.*)
#dynamic.7.postprocess=sprintf("%.1f", $1/1000)
#dynamic.7.rrd=GAUGE

#dynamic.8.name=disktemp
#dynamic.8.source=/tmp/disktemp
#dynamic.8.regexp=(.*)
#dynamic.8.postprocess=sprintf("%.1f", $1/1000)
#dynamic.8.rrd=GAUGE

dynamic.9.name=vcorevoltage
dynamic.9.source=/sys/class/regulator/regulator.4/microvolts
dynamic.9.regexp=(.*)
dynamic.9.postprocess=sprintf("%.2f", $1/1000000)
#dynamic.9.postprocess=$1/1000000
dynamic.9.rrd=GAUGE

#dynamic.10.name=cpu_stat,system_stat,user_stat,nice_stat,iowait_stat,irq_stat
#dynamic.10.source=/tmp/cpustat
#dynamic.10.regexp=^(\S+)\s(\S+)\s(\S+)\s(\S+)\s(\S+)\s(\S+)
#dynamic.10.postprocess=
#dynamic.10.rrd=GAUGE

dynamic.11.name=coolingstate
dynamic.11.source=/sys/devices/virtual/thermal/cooling_device0/cur_state
dynamic.11.regexp=(.*)
dynamic.11.postprocess=
dynamic.11.rrd=GAUGE

#dynamic.12.name=cpuminer
#dynamic.12.source=/tmp/khash
#dynamic.12.regexp=(.*)
#dynamic.12.postprocess=
#dynamic.12.rrd=GAUGE


########################################################################
#    STATUS PAGE
########################################################################
web.status.1.content.1.name=CPU
web.status.1.content.1.icon=cpu.png
web.status.1.content.1.line.1=JustGageBar("Load", "1min", 0, data.load1, 3, 100, 80)+" "+JustGageBar("Load", "5min", 0, data.load5, 3, 100, 80)+" "+JustGageBar("Load", "15min", 0, data.load15, 3, 100, 80)
#web.status.1.content.1.line.2="CPU total: <b>" + data.cpu_stat + "%</b> (Sys: " + data.system_stat + "%, User: " + data.user_stat + "%, I/O wait: " + data.iowait_stat + "%, Nice: " + data.nice_stat + "%)"
web.status.1.content.1.line.2="CPU frequency: <b>" + data.cpu_frequency + "MHz</b>  DRAM frequency: <b>Not available</b>"
web.status.1.content.1.line.3="Governor: <b>" + data.scaling_governor + "</b>  Active CPU cores: <b>" + data.cpu_count + "</b>  Vcore: <b>" + data.vcorevoltage + "</b>"

web.status.1.content.3.name=Temperature
web.status.1.content.3.icon=cpu_temp.png
web.status.1.content.3.line.1=JustGageBar("SoC", "  C",0, data.soctemp , 100,100,80,percentColors,50,70)+" "+JustGageBar("Disk", "  C",0, data.disktemp , 100,100,80,percentColor$
web.status.1.content.3.line.1=JustGageBar("SoC", "°C",0, data.soctemp , 100,100,80,percentColors,50,70)+" "+JustGageBar("Disk", "°C",0, data.disktemp , 100,100,80,percentColors,40,50)+" "+JustGageBar("Cooling State", "",0, data.coolingstate , 5,100,80,percentColors,1,2)


########################################################################
#   STATISTICS PAGE
########################################################################
web.statistics.1.content.1.name=Load / Clockspeeds / Temperature
web.statistics.1.content.1.graph.1=load1
web.statistics.1.content.1.graph.2=load5
web.statistics.1.content.1.graph.3=load15
web.statistics.1.content.1.graph.4=cpu_frequency
web.statistics.1.content.1.graph.5=cpu_count
web.statistics.1.content.1.graph.6=soctemp
web.statistics.1.content.1.graph.7=vcorevoltage

web.statistics.1.content.1.ds_graph_options.load1.label=Load 1 min
web.statistics.1.content.1.ds_graph_options.load5.label=Load 5 min
web.statistics.1.content.1.ds_graph_options.load15.label=Load 15 min

web.statistics.1.content.1.ds_graph_options.cpu_frequency.label=CPU Clock speed (GHz)
web.statistics.1.content.1.ds_graph_options.cpu_frequency.yaxis=2

web.statistics.1.content.1.ds_graph_options.cpu_count.label=Active CPUs
web.statistics.1.content.1.ds_graph_options.cpu_count.yaxis=2

web.statistics.1.content.1.ds_graph_options.soctemp.label=SoC temp (  C)

web.statistics.1.content.1.ds_graph_options.vcorevoltage.label=Vcore (V)
web.statistics.1.content.1.ds_graph_options.vcorevoltage.yaxis=2

web.statistics.1.content.1.ds_graph_options.cpu_stat.label=CPU total (%)
web.statistics.1.content.1.graph_options.y1axis={ position: "left", min: 35, max: 75 }
web.statistics.1.content.1.graph_options.y2axis={ position: "right" }



# von Tido
web.statistics.1.content.3.name=Load / Cores / Temperature
web.statistics.1.content.3.graph.1=load1
web.statistics.1.content.3.graph.2=cpu_count
web.statistics.1.content.3.graph.3=soctemp
web.statistics.1.content.3.ds_graph_options.load1.label=Load 1 min
web.statistics.1.content.3.ds_graph_options.cpu_count.label=Active CPUs
web.statistics.1.content.3.ds_graph_options.soctemp.label=SoC temp (  C)
web.statistics.1.content.3.ds_graph_options.soctemp.yaxis=2

 

 

This is the Template from armbian.

cp /etc/rpimonitor/template/raspbian.conf /etc/rpimonitor/template/raspbian.conf.orig
so you have a backup.

Now delete all the text within the file
ctrl + k
and paste this text into it:

Spoiler 

web.page.icon='img/logo.png'
web.page.menutitle='RPi-Monitor  <sub>('+data.hostname+')</sub>'
web.page.pagetitle='RPi-Monitor ('+data.hostname+')'

web.status.1.name=Raspberry Pi
web.statistics.1.name=Raspberry Pi

web.addons.1.name=Addons
web.addons.1.addons=about

include=/etc/rpimonitor/template/version.conf
include=/etc/rpimonitor/template/uptime.conf
include=/etc/rpimonitor/template/memory.conf
include=/etc/rpimonitor/template/swap.conf
include=/etc/rpimonitor/template/sdcard.conf

dynamic.1.name=cpu_frequency
dynamic.1.source=/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
dynamic.1.regexp=(.*)
dynamic.1.postprocess=sprintf("%.3f", $1/1000000)
dynamic.1.rrd=GAUGE

dynamic.2.name=load1,load5,load15
dynamic.2.source=/proc/loadavg
dynamic.2.regexp=^(\S+)\s(\S+)\s(\S+)
dynamic.2.postprocess=
dynamic.2.rrd=GAUGE

dynamic.3.name=scaling_governor
dynamic.3.source=/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
dynamic.3.regexp=(.*)
dynamic.3.postprocess=
dynamic.3.rrd=

dynamic.4.name=cpu_count
dynamic.4.source=grep -c processor /proc/cpuinfo
dynamic.4.regexp=(.*)
dynamic.4.postprocess=
dynamic.4.rrd=GAUGE

dynamic.5.name=dram_frequency
dynamic.5.source=/sys/devices/platform/sunxi-ddrfreq/devfreq/sunxi-ddrfreq/cur_freq
dynamic.5.regexp=(.*)
dynamic.5.postprocess=sprintf("%.3f", $1/1000000)
dynamic.5.rrd=GAUGE

dynamic.6.name=soctemp
dynamic.6.source=/etc/armbianmonitor/datasources/soctemp
dynamic.6.regexp=(.*)
dynamic.6.postprocess=
dynamic.6.rrd=GAUGE

dynamic.7.name=externaltemp
dynamic.7.source=/tmp/externaltemp
dynamic.7.regexp=(.*)
dynamic.7.postprocess=sprintf("%.1f", $1/1000)
dynamic.7.rrd=GAUGE

dynamic.8.name=disktemp
dynamic.8.source=/tmp/disktemp
dynamic.8.regexp=(.*)
dynamic.8.postprocess=sprintf("%.1f", $1/1000)
dynamic.8.rrd=GAUGE

dynamic.9.name=vcorevoltage
dynamic.9.source=/sys/class/regulator/regulator.4/microvolts
dynamic.9.regexp=(.*)
dynamic.9.postprocess=sprintf("%.2f", $1/1000)
dynamic.9.rrd=GAUGE

dynamic.10.name=cpu_stat,system_stat,user_stat,nice_stat,iowait_stat,irq_stat
dynamic.10.source=/tmp/cpustat
dynamic.10.regexp=^(\S+)\s(\S+)\s(\S+)\s(\S+)\s(\S+)\s(\S+)
dynamic.10.postprocess=
dynamic.10.rrd=GAUGE

dynamic.11.name=coolingstate
dynamic.11.source=/sys/devices/virtual/thermal/cooling_device0/cur_state
dynamic.11.regexp=(.*)
dynamic.11.postprocess=
dynamic.11.rrd=GAUGE

dynamic.12.name=cpuminer
dynamic.12.source=/tmp/khash
dynamic.12.regexp=(.*)
dynamic.12.postprocess=
dynamic.12.rrd=GAUGE


########################################################################
#    STATUS PAGE
########################################################################
web.status.1.content.1.name=CPU
web.status.1.content.1.icon=cpu.png
web.status.1.content.1.line.1=JustGageBar("Load", "1min", 0, data.load1, 3, 100, 80)+" "+JustGageBar("Load", "5min", 0, data.load5, 3, 100, 80)+" "+JustGageBar("Load", "15min", 0, data.load15, 3, 100, 80)
web.status.1.content.1.line.2="CPU total: <b>" + data.cpu_stat + "%</b> (Sys: " + data.system_stat + "%, User: " + data.user_stat + "%, I/O wait: " + data.iowait_stat + "%, Nice: " + data.nice_stat + "%)"
web.status.1.content.1.line.3="CPU frequency: <b>" + data.cpu_frequency + "GHz</b> &nbsp;DRAM frequency: <b>" + data.dram_frequency + "GHz</b>"
web.status.1.content.1.line.4="Governor: <b>" + data.scaling_governor + "</b> &nbsp;Active CPU cores: <b>" + data.cpu_count + "</b> &nbsp;Vcore: <b>" + data.vcorevoltage + "</b>"

web.status.1.content.3.name=Temperature
web.status.1.content.3.icon=cpu_temp.png
web.status.1.content.3.line.1=JustGageBar("SoC", "°C",0, data.soctemp , 100,100,80,percentColors,50,70)+" "+JustGageBar("Disk", "°C",0, data.disktemp , 100,100,80,percentColors,40,50)+" "+JustGageBar("Cooling State", "",0, data.coolingstate , 5,100,80,percentColors,1,2)


########################################################################
#   STATISTICS PAGE
########################################################################
web.statistics.1.content.1.name=Load / Clockspeeds / Temperature
web.statistics.1.content.1.graph.1=load1
web.statistics.1.content.1.graph.2=load5
web.statistics.1.content.1.graph.3=load15
web.statistics.1.content.1.graph.4=cpu_frequency
web.statistics.1.content.1.graph.5=dram_frequency
web.statistics.1.content.1.graph.6=cpu_count
web.statistics.1.content.1.graph.7=soctemp
web.statistics.1.content.1.graph.8=vcorevoltage
web.statistics.1.content.1.graph.9=disktemp
web.statistics.1.content.1.graph.10=cpu_stat
web.statistics.1.content.1.graph.11=coolingstate
web.statistics.1.content.1.graph.12=cpuminer
web.statistics.1.content.1.ds_graph_options.load1.label=Load 1 min
web.statistics.1.content.1.ds_graph_options.load5.label=Load 5 min
web.statistics.1.content.1.ds_graph_options.load15.label=Load 15 min
web.statistics.1.content.1.ds_graph_options.cpu_frequency.label=CPU Clock speed (GHz)
web.statistics.1.content.1.ds_graph_options.cpu_frequency.yaxis=2
web.statistics.1.content.1.ds_graph_options.dram_frequency.label=DRAM Clock speed (GHz)
web.statistics.1.content.1.ds_graph_options.dram_frequency.yaxis=2
web.statistics.1.content.1.ds_graph_options.cpu_count.label=Active CPUs
web.statistics.1.content.1.ds_graph_options.cpu_count.yaxis=2
web.statistics.1.content.1.ds_graph_options.soctemp.label=SoC temp (°C)
web.statistics.1.content.1.ds_graph_options.cpuminer.label=khash/s
web.statistics.1.content.1.ds_graph_options.cpuminer.yaxis=2
web.statistics.1.content.1.ds_graph_options.disktemp.label=Disk temp (°C)
web.statistics.1.content.1.ds_graph_options.vcorevoltage.label=Vcore (V)
web.statistics.1.content.1.ds_graph_options.vcorevoltage.yaxis=2
web.statistics.1.content.1.ds_graph_options.coolingstate.label=Cooling State
web.statistics.1.content.1.ds_graph_options.coolingstate.yaxis=2
web.statistics.1.content.1.ds_graph_options.cpu_stat.label=CPU total (%)
web.statistics.1.content.1.graph_options.y1axis={ position: "left", min: 35, max: 75 }
web.statistics.1.content.1.graph_options.y2axis={ position: "right" }

web.statistics.1.content.2.name=Detailed CPU Stats
web.statistics.1.content.2.graph.1=cpu_stat
web.statistics.1.content.2.graph.2=system_stat
web.statistics.1.content.2.graph.3=user_stat
web.statistics.1.content.2.graph.4=nice_stat
web.statistics.1.content.2.graph.5=iowait_stat
web.statistics.1.content.2.graph.6=irq_stat
web.statistics.1.content.2.ds_graph_options.cpu_stat.label=CPU total (%)
web.statistics.1.content.2.ds_graph_options.system_stat.label=System (%)
web.statistics.1.content.2.ds_graph_options.user_stat.label=User (%)
web.statistics.1.content.2.ds_graph_options.nice_stat.label=Nice (%)
web.statistics.1.content.2.ds_graph_options.iowait_stat.label=I/O wait (%)
web.statistics.1.content.2.ds_graph_options.irq_stat.label=IRQ/softirq (%)
web.statistics.1.content.2.graph_options.y1axis={ position: "left", min: 0, max: 100 }

 

Now you will see that some information is missing, like RAM-frequency, but also 'Detailed CPU Stats'.

 

  • Author

While trying to find some software telling me more about the hardware I came across this: 

dpkg -l procinfo hwinfo lshw dmidecode  
apt-get install procinfo hwinfo lshw inxi (needs like 830kB)

 

 

Commands with the software just installed (line by line): 

hwinfo > /home/hwinfo.txt   (export it to the SDcard as text file 170kB)
hwinfo --short > /home/hwinfo-short.txt
hwinfo   (long version)
dmesg | grep -i memory
dmesg | grep -i usb
lsusb -t
dmesg | grep -i tty
I guess it is only for x86 system with BIOS man dmidecode
dmidecode -t memory
dmidecode -t bios
root@tinkerboard:/home# dmidecode -t processor
# dmidecode 2.12
/dev/mem: Operation not permitted

procinfo -h
procinfo
procinfo -S   (values per second)
lscpu
lshw -short
lshw (long version)
lshw -class memory

inxi -Fx
inxi -h

 

 

GUI applications:
https://github.com/fontanon/udev-discover
sysinfo
hardinfo

 

 

  • Author

While all chasing the voltage on their board - I thought it could be useful to have a profile in RPi-Monitor to read these out.

Step by step so you are not losing any data.

Backup: 

cp /etc/rpimonitor/template/raspbian.conf /etc/rpimonitor/template/raspbian.conf.orig

Paste the content:

Spoiler 

nano /etc/rpimonitor/template/raspbian.conf
Now delete all the text within the file and paste this text into it:  ctrl + k

# Paste these lines:
web.page.icon='img/logo.png'
web.page.menutitle='RPi-Monitor  <sub>('+data.hostname+')</sub>'
web.page.pagetitle='RPi-Monitor ('+data.hostname+')'

web.status.1.name=Raspberry Pi
web.statistics.1.name=Raspberry Pi

web.addons.1.name=Addons
web.addons.1.addons=about

include=/etc/rpimonitor/template/version.conf
include=/etc/rpimonitor/template/uptime.conf
include=/etc/rpimonitor/template/memory.conf
include=/etc/rpimonitor/template/sdcard.conf

dynamic.1.name=cpu_frequency
dynamic.1.source=/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
dynamic.1.regexp=(.*)
dynamic.1.postprocess=sprintf("%.3f", $1/1000000)
dynamic.1.rrd=GAUGE

dynamic.2.name=load1,load5,load15
dynamic.2.source=/proc/loadavg
dynamic.2.regexp=^(\S+)\s(\S+)\s(\S+)
dynamic.2.postprocess=
dynamic.2.rrd=GAUGE

dynamic.3.name=vsys_regulator
dynamic.3.source=/sys/devices/platform/vsys-regulator/regulator/regulator.1/microvolts
dynamic.3.regexp=(.*)
dynamic.3.postprocess=sprintf("%.2f", $1/1000000)
dynamic.3.rrd=GAUGE

dynamic.4.name=vcorevoltage
dynamic.4.source=/sys/class/regulator/regulator.4/microvolts
dynamic.4.regexp=(.*)
dynamic.4.postprocess=sprintf("%.2f", $1/1000000)
dynamic.4.rrd=GAUGE

dynamic.5.name=vcc_SD
dynamic.5.source=/sys/devices/platform/sdmmc-regulator/regulator/regulator.2/microvolts
dynamic.5.regexp=(.*)
dynamic.5.postprocess=sprintf("%.2f", $1/1000000)
dynamic.5.rrd=GAUGE

dynamic.6.name=vccio_SD
dynamic.6.source=/sys/class/regulator/regulator.8/microvolts
dynamic.6.regexp=(.*)
dynamic.6.postprocess=sprintf("%.2f", $1/1000000)
dynamic.6.rrd=GAUGE

dynamic.7.name=vdd_gpu
dynamic.7.source=/sys/class/regulator/regulator.10/microvolts
dynamic.7.regexp=(.*)
dynamic.7.postprocess=sprintf("%.2f", $1/1000000)
dynamic.7.rrd=GAUGE

dynamic.8.name=vdd_logic
dynamic.8.source=/sys/devices/platform/vdd_log/regulator/regulator.3/microvolts
dynamic.8.regexp=(.*)
dynamic.8.postprocess=sprintf("%.2f", $1/1000000)
dynamic.8.rrd=GAUGE


########################################################################
#    STATUS PAGE
########################################################################
web.status.1.content.1.name=CPU
web.status.1.content.1.icon=cpu.png
web.status.1.content.1.line.1=JustGageBar("Load", "1min", 0, data.load1, 3, 100, 80)+" "+JustGageBar("Load", "5min", 0, data.load5, 3, 100, 80)+" "+JustGageBar("Load", "15min", 0, data.load15, 3, 100, 80)
#web.status.1.content.1.line.2="CPU total: <b>" + data.cpu_stat + "%</b> (Sys: " + data.system_stat + "%, User: " + data.user_stat + "%, I/O wait: " + data.iowait_stat + "%, Nice: " + data.nice_stat + "%)"
web.status.1.content.1.line.2="CPU frequency: <b>" + data.cpu_frequency + "MHz</b>  DRAM frequency: <b>Not available</b>"
web.status.1.content.1.line.3="Governor: <b>" + data.scaling_governor + "</b>  Active CPU cores: <b>" + data.cpu_count + "</b>  Vcore: <b>" + data.vcorevoltage + "</b>"

web.status.1.content.3.name=Voltage
web.status.1.content.3.icon=pmu.png
web.status.1.content.3.line.1=JustGageBar("SoC", "  V",0, data.vcorevoltage , 2.5,100,80,percentColors,1.1,1.35)+" "+JustGageBar("GPU", "  V",0, data.vdd_gpu , 2,100,80,percentColors,1.1,2)+" "+JustGageBar("System", "",0, data.vsys_regulator , 10,100,80,percentColors,5.1,5.4)

########################################################################
#   STATISTICS PAGE
########################################################################
web.statistics.1.content.1.name=Load / Clockspeeds / Voltage
web.statistics.1.content.1.graph.1=load1
web.statistics.1.content.1.graph.2=cpu_frequency
web.statistics.1.content.1.graph.3=vsys_regulator
web.statistics.1.content.1.graph.4=vcorevoltage
web.statistics.1.content.1.graph.5=vcc_SD
web.statistics.1.content.1.graph.6=vccio_SD
web.statistics.1.content.1.graph.7=vdd_gpu
web.statistics.1.content.1.graph.8=vdd_logic

web.statistics.1.content.1.ds_graph_options.load1.label=Load 1 min
web.statistics.1.content.1.ds_graph_options.cpu_frequency.label=CPU Clock speed (GHz)
web.statistics.1.content.1.ds_graph_options.cpu_frequency.yaxis=2

web.statistics.1.content.1.ds_graph_options.vsys_regulator.label=vsys-regulator
web.statistics.1.content.1.ds_graph_options.vcorevoltage.label=Vcore (V)
web.statistics.1.content.1.ds_graph_options.vcorevoltage.yaxis=2

web.statistics.1.content.1.ds_graph_options.vcc_SD.label=vcc_SD
web.statistics.1.content.1.ds_graph_options.vccio_SD.label=vccio_SD

web.statistics.1.content.1.ds_graph_options.vdd_gpu.label=vdd_gpu
web.statistics.1.content.1.ds_graph_options.vdd_logic.label=vdd_logic

 

 

 

if it looks different adjust with: chmod 0664 

-rw-rw-r-- 1 root root  6442 May 12 23:46 raspbian.conf
-rw-rw-r-- 1 root root 13825 May  6 16:23 raspbian.conf.orig

 

Edited by Tido
added some gage for status page

  • Author

This is form another thread about Kernel 4.13

Quote

Just pushed re-organized thermals to repo,

cpu_thermal is zone0,

gpu_thermal is zone1. 

This is for dev, next, and default.

 

Guest
This topic is now closed to further replies.
Go to topic listing

Account

Navigation

Search

Search

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.