Orange PI PC + Not booting and throwing Kernel panic on Console

I tried to install default linux kernel (3.4.113) on Orange Pi PC + and It's keep on rebooting while displaying kernel panic on console.

Below I have attached the log

 

U-Boot 2017.11-armbian (Dec 18 2017 - 14:24:28 +0530) Allwinner Technology

 

CPU: Allwinner H3 (SUN8I 1680)

Model: Xunlong Orange Pi PC Plus

DRAM: 1 GiB

MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1

In: serial

Out: serial

Err: serial

Net: phy interface0

eth0: ethernet@1c30000

starting USB...

USB0: USB EHCI 1.00

USB1: USB OHCI 1.0

USB2: USB EHCI 1.00

USB3: USB OHCI 1.0

USB4: USB EHCI 1.00

USB5: USB OHCI 1.0

scanning bus 0 for devices... 1 USB Device(s) found

scanning bus 2 for devices... 1 USB Device(s) found

scanning bus 4 for devices... 1 USB Device(s) found

scanning usb for storage devices... 0 Storage Device(s) found

Hit any key to stop autoboot: 0

switch to partitions #0, OK

mmc0 is current device

Scanning mmc 0:1...

Found U-Boot script /boot/boot.scr

3708 bytes read in 197 ms (17.6 KiB/s)

## Executing script at 43100000

U-boot loaded from SD

Boot script loaded from mmc

115 bytes read in 150 ms (0 Bytes/s)

5191308 bytes read in 496 ms (10 MiB/s)

4808360 bytes read in 496 ms (9.2 MiB/s)

Found legacy kernel configuration

36392 bytes read in 518 ms (68.4 KiB/s)

## Loading init Ramdisk from Legacy Image at 43300000 ...

Image Name: uInitrd

Image Type: ARM Linux RAMDisk Image (gzip compressed)

Data Size: 5191244 Bytes = 5 MiB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Loading Ramdisk to 49b0c000, end 49fff64c ... OK

Using machid 0x1029 from environment

 

Starting kernel ...

 

[sun8i_fixup]: From boot, get meminfo:

Start: 0x40000000

Size: 1024MB

ion_carveout reserve: 160m@0 256m@0 130m@1 200m@1

ion_reserve_select: ion chipid [0x2c00081!

ion_reserve_common: ion reserve: [0x50000000, 0x60000000]!

Loading, please wait...

starting version 229

Begin: Loading essential drivers ... done.

Begin: Running /scripts/init-premount ... done.

Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.

Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems

done.

Begin: Will now check root file system ... fsck from util-linux 2.27.1

[/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1

/dev/mmcblk0p1 has unsupported feature(s): metadata_csum

e2fsck: Get a newer version of e2fsck!

fsck exited with status code 8

done.

Warning: File system check failed but did not detect errors

mount: mounting /dev/mmcblk0p1 on /root failed: Invalid argument

done.

Begin: Running /scripts/local-bottom ... done.

Begin: Running /scripts/init-bottom ... mount: mounting /dev on /root/dev failed: No such file or directory

done.

mount: mounting /run on /root/run failed: No such file or directory

run-init: current directory on the same filesystem as the root: error 0

Target filesystem doesn't have requested /sbin/init.

run-init: current directory on the same filesystem as the root: error 0

run-init: current directory on the same filesystem as the root: error 0

run-init: current directory on the same filesystem as the root: error 0

run-init: current directory on the same filesystem as the root: error 0

run-init: current directory on the same filesystem as the root: error 0

No init found. Try passing init= bootarg.

Rebooting automatically due to panic= boot argument

 

Kindly help me resolve this the issue ?