September 10Sep 10 Become a sponsor, help to add other boards in armbian standart, you don't need to be a programmer to help the community, just need a copy of the ARM BOARD and a x86 computer to compile new versions. If you like what you see here and want to help: Donate Armbian the like button only costs a few dollars. Here will be published all the tweaks for the Embedfire RK3576 board to enter the mainline with armbian. MiniLoaderAll.bin https://drive.google.com/file/d/15q19LOv_XuXbvwdlVjEWuhQtNEceOXwc Documentation: https://doc.embedfire.com/linux/rk3576/quick_start/zh/latest/index.html Unnoficial Firmware: https://drive.google.com/file/d/1MVb1bwc-vf6geXrWAVmU1RLjvcAyCQh6/view?usp=sharing Board Image:
September 11Sep 11 Author Build Vendor: ./compile.sh BOARD=lubancat-3-v2 BRANCH=vendor BUILD_DESKTOP=yes BUILD_MINIMAL=no DESKTOP_ENVIRONMENT=gnome DESKTOP_TIER=mid KERNEL_CONFIGURE=yes INSTALL_HEADERS=yes RELEASE=noble Vendor Kernel $ cat dmesg $ dmesg $ armbianmonitor -u https://paste.armbian.com/oxoreteqib https://paste.armbian.com/aqatapejip Armbian-unofficial_26.11.0-trunk_Lubancat-3-v2_noble_vendor_6.1.172_gnome_desktop https://drive.google.com/file/d/1MVb1bwc-vf6geXrWAVmU1RLjvcAyCQh6/view?usp=sharing PR into Rockchip Kernel: https://github.com/armbian/linux-rockchip/pull/549
September 11Sep 11 Nice writeup — following this one closely, RK3576 boards are popping up everywhere lately. One thing worth mentioning: MiniLoaderAll.bin is fine for getting the vendor branch running, but for the mainline path you'll want the idbloader built from mainline U-Boot with the rkbin blobs instead. Armbian refreshed the bl31/bl32 and DDR blobs for RK3576 recently, so a mainline build is closer than it looks — the BL32 hang thread in this forum last month was exactly that stage. Once lubancat-3-v2 boots on vendor, it might be worth a quick try on the edge kernel to see what's still missing before submitting the board config upstream. Saves a round of review comments later. We do RK3576/RK3588 work on the industrial side at Boardcon, so if you run into anything odd during DDR init or PMIC sequencing, happy to compare notes.
September 13Sep 13 Author @Boardcon_yang Thanks for the tip, here are the boot logs using this loader for mainline 6.18: Quote USB-PLUG 2017.09-g13ceb2afdcb-241106 #lxh (Nov 07 2024 - 16:10:03 +0800) Serial: raw, 0x2ad40000 scanning bus for devices... Timedout waiting for UIC response Timedout waiting for UIC response Timedout waiting for UIC response Timedout waiting for UIC response link startup failed -110 ufshcd_pltfrm_init() failed -110 Scandev: scsi 0 m0 mmc@2a330000: 0 Scandev: mmc 0 m0 Bootdev: mmc 0 RKUSB: LUN 0, dev 0, hwpart 0, sector 0x0, count 0x3a40000 |usb device is high-speed /DDR fcb0cfd52f cym 24/10/09-19:36:03,fwver: v1.08 In ch0 ttot10 ch1 ttot10 ch0 ttot16 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB ch1 ttot16 channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB Manufacturer ID:0x13 CH0 RX Vref:24.9%, RX DQS Vref:30.4%, TX Vref:22.8%,22.8% DQ roc: p1 n1, p0 n4, p0 n0, p0 n0, p2 n3, p1 n1, p0 n1, p3 n0, p1 n3, p0 n0, p2 n1, p7 n0, p0 n0, p7 n1, p0 n0, p2 n0, p4 n0, p5 n7, DQ rds:l0 l0 l0 l0 l0 l0 l0 l0, l0 l0 l0 l0 l0 l0 l0 l0 DQS roc: p1, n0, p0, n0 CH1 RX Vref:24.9%, RX DQS Vref:31.2%, TX Vref:23.8%,21.8% DQ roc: p1 n0, p0 n0, p0 n0, p0 n2, p4 n0, p0 n3, p3 n0, p3 n5, p0 n0, p0 n0, p3 n0, p0 n0, p1 n0, p7 n0, p7 n0, p0 n0, p1 n0, p7 n0, DQ rds:l0 l0 l0 l0 l0 l0 l0 l0, l0 l0 l0 l0 l0 l0 l0 l0 DQS roc: p0, n1, p2, n0 stride=0x3, ddr_config=0x4 hash bank_mask0-3 0x0 0x880 0x1100 0x2200, rank_mask0 0x400400 change to F1: 528MHz ch0 ttot10 ch1 ttot10 change to F2: 1068MHz ch0 ttot12 ch1 ttot12 change to F3: 1560MHz ch0 ttot14 ch1 ttot14 change to F0: 2112MHz ch0 ttot16 ch1 ttot16 out U-Boot SPL 2026.07_armbian-2026.07-Sece3-P4dba-H1974-V0a2c-B6a81-R448a (Sep 12 2026 - 23:34:04 +0000) Trying to boot from MMC2 ## Checking hash(es) for config config-1 ... OK ## Checking hash(es) for Image atf-1 ... sha256+ OK ## Checking hash(es) for Image u-boot ... sha256+ OK ## Checking hash(es) for Image fdt-1 ... sha256+ OK ## Checking hash(es) for Image atf-2 ... sha256+ OK ## Checking hash(es) for Image atf-3 ... sha256+ OK INFO: Preloader serial: 0 NOTICE: BL31: v2.3():v2.3-931-g4d7e811c6:derrick.huang, fwver: v1.20 NOTICE: BL31: Built : 19:19:38, May 26 2025 INFO: SOC (0x35760101) INFO: spec: 0x1 INFO: test version: 0x0 INFO: cost 375905 us before hptimer restart INFO: soc cold boot INFO: ARM GICv2 driver initialized INFO: bypass memory repair INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz INFO: Using opteed sec cpu_context! INFO: boot cpu mask: 1 INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x40800000 INFO: SPSR = 0x3c9 U-Boot 2026.07_armbian-2026.07-Sece3-P4dba-H1974-V0a2c-B6a81-R448a (Sep 12 2026 - 23:34:04 +0000) Model: EmbedFire LubanCat-3-v2 SoC: RK3576 DRAM: 4 GiB PMIC: RK806 (on=0x40, off=0x00) Core: 991 devices, 26 uclasses, devicetree: separate MMC: mmc@2a310000: 0, mmc@2a330000: 1 Loading Environment from nowhere... OK In: serial@2ad40000 Out: serial@2ad40000 Err: serial@2ad40000 Net: No ethernet found. Hit any key to stop autoboot: 0 Scanning for bootflows in all bootdevs Seq Method State Uclass Part Name Filename --- ----------- ------ -------- ---- ------------------------ ---------------- Scanning global bootmeth 'efi_mgr': Card did not respond to voltage select! : -110 Cannot persist EFI variables without system partition 0 efi_mgr ready (none) 0 <NULL> ** Booting bootflow '<NULL>' with efi_mgr Loading Boot0000 'mmc 1' failed EFI boot manager: Cannot load any image Boot failed (err=-14) Scanning bootdev 'mmc@2a330000.bootdev': 1 script ready mmc 1 mmc@2a330000.bootdev.part /boot/boot.scr ** Booting bootflow 'mmc@2a330000.bootdev.part_1' with script Boot script loaded from mmc 1:1 170 bytes read in 12 ms (13.7 KiB/s) 24812078 bytes read in 156 ms (151.7 MiB/s) 35916288 bytes read in 218 ms (157.1 MiB/s) 185740 bytes read in 34 ms (5.2 MiB/s) Working FDT set to 52000000 Trying kaslrseed command... Info: Unknown command can be safely ignored since kaslrseed does not apply to all boards. Unknown command 'kaslrseed' - try 'help' ## Loading init Ramdisk from Legacy Image at 52180000 ... Image Name: uInitrd Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 24812014 Bytes = 23.7 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 52000000 Booting using the fdt blob at 0x52000000 Working FDT set to 52000000 Loading Ramdisk to fb456000, end fcbff9ee ... OK Loading Device Tree to 00000000fce28000, end 00000000fcebdfff ... OK Working FDT set to fce28000 [image_setup_libfdt] called [image_setup_libfdt] calling fdt_fixup_ethernet [fdt_fixup_ethernet] called [fdt_fixup_ethernet] alias #0: name='i2c0', path='/soc/i2c@27300000' [fdt_fixup_ethernet] alias #1: name='i2c1', path='/soc/i2c@2ac40000' [fdt_fixup_ethernet] alias #2: name='i2c2', path='/soc/i2c@2ac50000' [fdt_fixup_ethernet] alias #3: name='i2c3', path='/soc/i2c@2ac60000' [fdt_fixup_ethernet] alias #4: name='i2c4', path='/soc/i2c@2ac70000' [fdt_fixup_ethernet] alias #5: name='i2c5', path='/soc/i2c@2ac80000' [fdt_fixup_ethernet] alias #6: name='i2c6', path='/soc/i2c@2ac90000' [fdt_fixup_ethernet] alias #7: name='i2c7', path='/soc/i2c@2aca0000' [fdt_fixup_ethernet] alias #8: name='i2c8', path='/soc/i2c@2acb0000' [fdt_fixup_ethernet] alias #9: name='i2c9', path='/soc/i2c@2ae80000' [fdt_fixup_ethernet] alias #10: name='serial0', path='/soc/serial@2ad40000' [fdt_fixup_ethernet] alias #11: name='serial1', path='/soc/serial@27310000' [fdt_fixup_ethernet] alias #12: name='serial2', path='/soc/serial@2ad50000' [fdt_fixup_ethernet] alias #13: name='serial3', path='/soc/serial@2ad60000' [fdt_fixup_ethernet] alias #14: name='serial4', path='/soc/serial@2ad70000' [fdt_fixup_ethernet] alias #15: name='serial5', path='/soc/serial@2ad80000' [fdt_fixup_ethernet] alias #16: name='serial6', path='/soc/serial@2ad90000' [fdt_fixup_ethernet] alias #17: name='serial7', path='/soc/serial@2ada0000' [fdt_fixup_ethernet] alias #18: name='serial8', path='/soc/serial@2adb0000' [fdt_fixup_ethernet] alias #19: name='serial9', path='/soc/serial@2adc0000' [fdt_fixup_ethernet] alias #20: name='serial10', path='/soc/serial@2afc0000' [fdt_fixup_ethernet] alias #21: name='serial11', path='/soc/serial@2afd0000' [fdt_fixup_ethernet] alias #22: name='spi0', path='/soc/spi@2acf0000' [fdt_fixup_ethernet] alias #23: name='spi1', path='/soc/spi@2ad00000' [fdt_fixup_ethernet] alias #24: name='spi2', path='/soc/spi@2ad10000' [fdt_fixup_ethernet] alias #25: name='spi3', path='/soc/spi@2ad20000' [fdt_fixup_ethernet] alias #26: name='spi4', path='/soc/spi@2ad30000' [fdt_fixup_ethernet] alias #27: name='ethernet0', path='/soc/ethernet@2a220000' [fdt_fixup_ethernet] env var for alias 'ethernet0' is 'ethaddr', value='52:ad:5a:0e:09:87' [fdt_fixup_ethernet] Patching node '/soc/ethernet@2a220000' (offset 91448) with MAC 52:ad:5a:0e:09:87 [fdt_fixup_ethernet] alias #28: name='mmc0', path='/soc/mmc@2a310000' [fdt_fixup_ethernet] alias #29: name='mmc1', path='/soc/mmc@2a330000' [fdt_fixup_ethernet] alias #30: name='rtc0', path='/soc/i2c@2ac60000/rtc@51' [fdt_fixup_ethernet] SUMMARY: aliases found=31, attempted=1, skipped=0, patched=1 Starting kernel ... Then it reboots: Quote USB-PLUG 2017.09-g13ceb2afdcb-241106 #lxh (Nov 07 2024 - 16:10:03 +0800) Serial: raw, 0x2ad40000 scanning bus for devices... Timedout waiting for UIC response Timedout waiting for UIC response Timedout waiting for UIC response Timedout waiting for UIC response link startup failed -110 ufshcd_pltfrm_init() failed -110 Scandev: scsi 0 m0 mmc@2a330000: 0 Scandev: mmc 0 m0 Bootdev: mmc 0 RKUSB: LUN 0, dev 0, hwpart 0, sector 0x0, count 0x3a40000 |usb device is high-speed /DDR fcb0cfd52f cym 24/10/09-19:36:03,fwver: v1.08 In ch0 ttot10 ch1 ttot10 ch0 ttot16 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB ch1 ttot16 channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB Manufacturer ID:0x13 CH0 RX Vref:24.9%, RX DQS Vref:30.4%, TX Vref:22.8%,22.8% DQ roc: p1 n1, p0 n4, p0 n0, p0 n0, p2 n3, p1 n1, p0 n1, p3 n0, p1 n3, p0 n0, p2 n1, p7 n0, p0 n0, p7 n1, p0 n0, p2 n0, p4 n0, p5 n7, DQ rds:l0 l0 l0 l0 l0 l0 l0 l0, l0 l0 l0 l0 l0 l0 l0 l0 DQS roc: p1, n0, p0, n0 CH1 RX Vref:24.9%, RX DQS Vref:31.2%, TX Vref:23.8%,21.8% DQ roc: p1 n0, p0 n0, p0 n0, p0 n2, p4 n0, p0 n3, p3 n0, p3 n5, p0 n0, p0 n0, p3 n0, p0 n0, p1 n0, p7 n0, p7 n0, p0 n0, p1 n0, p7 n0, DQ rds:l0 l0 l0 l0 l0 l0 l0 l0, l0 l0 l0 l0 l0 l0 l0 l0 DQS roc: p0, n1, p2, n0 stride=0x3, ddr_config=0x4 hash bank_mask0-3 0x0 0x880 0x1100 0x2200, rank_mask0 0x400400 change to F1: 528MHz ch0 ttot10 ch1 ttot10 change to F2: 1068MHz ch0 ttot12 ch1 ttot12 change to F3: 1560MHz ch0 ttot14 ch1 ttot14 change to F0: 2112MHz ch0 ttot16 ch1 ttot16 out U-Boot SPL 2026.07_armbian-2026.07-Sece3-P4dba-H1974-V0a2c-B6a81-R448a (Sep 12 2026 - 23:34:04 +0000) Trying to boot from MMC2 ## Checking hash(es) for config config-1 ... OK ## Checking hash(es) for Image atf-1 ... sha256+ OK ## Checking hash(es) for Image u-boot ... sha256+ OK ## Checking hash(es) for Image fdt-1 ... sha256+ OK ## Checking hash(es) for Image atf-2 ... sha256+ OK ## Checking hash(es) for Image atf-3 ... sha256+ OK INFO: Preloader serial: 0 NOTICE: BL31: v2.3():v2.3-931-g4d7e811c6:derrick.huang, fwver: v1.20 NOTICE: BL31: Built : 19:19:38, May 26 2025 INFO: SOC (0x35760101) INFO: spec: 0x1 INFO: test version: 0x0 INFO: cost 375905 us before hptimer restart INFO: soc cold boot INFO: ARM GICv2 driver initialized INFO: bypass memory repair INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz INFO: Using opteed sec cpu_context! INFO: boot cpu mask: 1 INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x40800000 INFO: SPSR = 0x3c9 U-Boot 2026.07_armbian-2026.07-Sece3-P4dba-H1974-V0a2c-B6a81-R448a (Sep 12 2026 - 23:34:04 +0000) Model: EmbedFire LubanCat-3-v2 SoC: RK3576 DRAM: 4 GiB PMIC: RK806 (on=0x40, off=0x00) Core: 991 devices, 26 uclasses, devicetree: separate MMC: mmc@2a310000: 0, mmc@2a330000: 1 Loading Environment from nowhere... OK In: serial@2ad40000 Out: serial@2ad40000 Err: serial@2ad40000 Net: No ethernet found. Hit any key to stop autoboot: 0 Scanning for bootflows in all bootdevs Seq Method State Uclass Part Name Filename --- ----------- ------ -------- ---- ------------------------ ---------------- Scanning global bootmeth 'efi_mgr': Card did not respond to voltage select! : -110 Cannot persist EFI variables without system partition 0 efi_mgr ready (none) 0 <NULL> ** Booting bootflow '<NULL>' with efi_mgr Loading Boot0000 'mmc 1' failed EFI boot manager: Cannot load any image Boot failed (err=-14) Scanning bootdev 'mmc@2a330000.bootdev': 1 script ready mmc sed: couldn't open temporary file /root/sedTDc7LM: Read-only file system rm: cannot remove '/etc/systemd/system/getty@.service.d/override.conf': Read-only file system rm: cannot remove '/etc/systemd/system/serial-getty@.service.d/override.conf': Read-only file system root@lubancat-3-v2:~# root@lubancat-3-v2:~# root@lubancat-3-v2:~# USB-PLUG 2017.09-g13ceb2afdcb-241106 #lxh (Nov 07 2024 - 16:10:03 +0800) -bash: USB-PLUG: command not found root@lubancat-3-v2:~# root@lubancat-3-v2:~# Serial: raw, 0x2ad40000 -bash: Serial:: command not found root@lubancat-3-v2:~# scanning bus for devices... -bash: scanning: command not found root@lubancat-3-v2:~# Timedout waiting for UIC response -bash: Timedout: command not found root@lubancat-3-v2:~# Timedout waiting for UIC response -bash: Timedout: command not found root@lubancat-3-v2:~# Timedout waiting for UIC response -bash: Timedout: command not found root@lubancat-3-v2:~# Timedout waiting for UIC response -bash: Timedout: command not found root@lubancat-3-v2:~# link startup failed -110 error: unexpected argument '-1' found tip: to pass '-1' as a value, use '-- -1' Usage: link FILE1 FILE2 For more information, try '--help'. root@lubancat-3-v2:~# ufshcd_pltfrm_init() failed -110 -bash: syntax error near unexpected token `failed' root@lubancat-3-v2:~# Scandev: scsi 0 m0 -bash: Scandev:: command not found root@lubancat-3-v2:~# mmc@2a330000: 0 -bash: mmc@2a330000:: command not found root@lubancat-3-v2:~# Scandev: mmc 0 m0 -bash: Scandev:: command not found root@lubancat-3-v2:~# Bootdev: mmc 0 -bash: Bootdev:: command not found root@lubancat-3-v2:~# RKUSB: LUN 0, dev 0, hwpart 0, sector 0x0, count 0x3a40000 -bash: RKUSB:: command not found root@lubancat-3-v2:~# |usb device is high-speed -bash: syntax error near unexpected token `|' root@lubancat-3-v2:~# /DDR fcb0cfd52f cym 24/10/09-19:36:03,fwver: v1.08 -bash: /DDR: No such file or directory root@lubancat-3-v2:~# In -bash: In: command not found root@lubancat-3-v2:~# ch0 ttot10 -bash: ch0: command not found root@lubancat-3-v2:~# ch1 ttot10 -bash: ch1: command not found root@lubancat-3-v2:~# ch0 ttot16 -bash: ch0: command not found root@lubancat-3-v2:~# LPDDR4X, 2112MHz -bash: LPDDR4X,: command not found root@lubancat-3-v2:~# channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB -bash: channel[0]: command not found root@lubancat-3-v2:~# ch1 ttot16 -bash: ch1: command not found root@lubancat-3-v2:~# channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB -bash: channel[1]: command not found root@lubancat-3-v2:~# Manufacturer ID:0x13 -bash: Manufacturer: command not found root@lubancat-3-v2:~# CH0 RX Vref:24.9%, RX DQS Vref:30.4%, TX Vref:22.8%,22.8% -bash: CH0: command not found root@lubancat-3-v2:~# DQ roc: -bash: DQ: command not found root@lubancat-3-v2:~# p1 n1, p0 n4, p0 n0, p0 n0, p2 n3, p1 n1, p0 n1, p3 n0, p1 n3, -bash: p1: command not found root@lubancat-3-v2:~# p0 n0, p2 n1, p7 n0, p0 n0, p7 n1, p0 n0, p2 n0, p4 n0, p5 n7, -bash: p0: command not found root@lubancat-3-v2:~# root@lubancat-3-v2:~# DQ rds:l0 l0 l0 l0 l0 l0 l0 l0, l0 l0 l0 l0 l0 l0 l0 l0 -bash: DQ: command not found root@lubancat-3-v2:~# DQS roc: p1, n0, p0, n0 -bash: DQS: command not found root@lubancat-3-v2:~# root@lubancat-3-v2:~# CH1 RX Vref:24.9%, RX DQS Vref:31.2%, TX Vref:23.8%,21.8% -bash: CH1: command not found root@lubancat-3-v2:~# DQ roc: -bash: DQ: command not found root@lubancat-3-v2:~# p1 n0, p0 n0, p0 n0, p0 n2, p4 n0, p0 n3, p3 n0, p3 n5, p0 n0, -bash: p1: command not found root@lubancat-3-v2:~# p0 n0, p3 n0, p0 n0, p1 n0, p7 n0, p7 n0, p0 n0, p1 n0, p7 n0, -bash: p0: command not found root@lubancat-3-v2:~# root@lubancat-3-v2:~# DQ rds:l0 l0 l0 l0 l0 l0 l0 l0, l0 l0 l0 l0 l0 l0 l0 l0 -bash: DQ: command not found root@lubancat-3-v2:~# DQS roc: p0, n1, p2, n0 -bash: DQS: command not found root@lubancat-3-v2:~# root@lubancat-3-v2:~# stride=0x3, ddr_config=0x4 root@lubancat-3-v2:~# hash bank_mask0-3 0x0 0x880 0x1100 0x2200, rank_mask0 0x400400 -bash: hash: bank_mask0-3: not found -bash: hash: 0x0: not found -bash: hash: 0x880: not found -bash: hash: 0x1100: not found -bash: hash: 0x2200,: not found -bash: hash: rank_mask0: not found -bash: hash: 0x400400: not found root@lubancat-3-v2:~# change to F1: 528MHz -bash: change: command not found root@lubancat-3-v2:~# ch0 ttot10 -bash: ch0: command not found root@lubancat-3-v2:~# ch1 ttot10 -bash: ch1: command not found root@lubancat-3-v2:~# change to F2: 1068MHz -bash: change: command not found root@lubancat-3-v2:~# ch0 ttot12 -bash: ch0: command not found root@lubancat-3-v2:~# ch1 ttot12 -bash: ch1: command not found root@lubancat-3-v2:~# change to F3: 1560MHz -bash: change: command not found root@lubancat-3-v2:~# ch0 ttot14 -bash: ch0: command not found root@lubancat-3-v2:~# ch1 ttot14 -bash: ch1: command not found root@lubancat-3-v2:~# change to F0: 2112MHz -bash: change: command not found root@lubancat-3-v2:~# ch0 ttot16 -bash: ch0: command not found root@lubancat-3-v2:~# ch1 ttot16 -bash: ch1: command not found root@lubancat-3-v2:~# out -bash: out: command not found root@lubancat-3-v2:~# root@lubancat-3-v2:~# U-Boot SPL 2026.07_armbian-2026.07-Sece3-P4dba-H1974-V0a2c-B6a81-R448a (Sep 12 2026 - 23:34:04 +0000) -bash: syntax error near unexpected token `(' root@lubancat-3-v2:~# Trying to boot from MMC2 -bash: Trying: command not found root@lubancat-3-v2:~# ## Checking hash(es) for config config-1 ... OK root@lubancat-3-v2:~# ## Checking hash(es) for Image atf-1 ... sha256+ OK root@lubancat-3-v2:~# ## Checking hash(es) for Image u-boot ... sha256+ OK root@lubancat-3-v2:~# ## Checking hash(es) for Image fdt-1 ... sha256+ OK root@lubancat-3-v2:~# ## Checking hash(es) for Image atf-2 ... sha256+ OK root@lubancat-3-v2:~# ## Checking hash(es) for Image atf-3 ... sha256+ OK root@lubancat-3-v2:~# INFO: Preloader serial: 0 -bash: INFO:: command not found root@lubancat-3-v2:~# NOTICE: BL31: v2.3():v2.3-931-g4d7e811c6:derrick.huang, fwver: v1.20 -bash: syntax error near unexpected token `(' root@lubancat-3-v2:~# NOTICE: BL31: Built : 19:19:38, May 26 2025 -bash: NOTICE:: command not found root@lubancat-3-v2:~# INFO: SOC (0x35760101) -bash: syntax error near unexpected token `(' root@lubancat-3-v2:~# INFO: spec: 0x1 -bash: INFO:: command not found root@lubancat-3-v2:~# INFO: test version: 0x0 -bash: INFO:: command not found root@lubancat-3-v2:~# INFO: cost 375905 us before hptimer restart -bash: INFO:: command not found root@lubancat-3-v2:~# INFO: soc cold boot -bash: INFO:: command not found root@lubancat-3-v2:~# INFO: ARM GICv2 driver initialized -bash: INFO:: command not found root@lubancat-3-v2:~# INFO: bypass memory repair -bash: INFO:: command not found root@lubancat-3-v2:~# INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz -bash: INFO:: command not found root@lubancat-3-v2:~# INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz -bash: INFO:: command not found root@lubancat-3-v2:~# INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz -bash: INFO:: command not found root@lubancat-3-v2:~# INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz -bash: INFO:: command not found root@lubancat-3-v2:~# INFO: Using opteed sec cpu_context! -bash: INFO:: command not found root@lubancat-3-v2:~# INFO: boot cpu mask: 1 -bash: INFO:: command not found root@lubancat-3-v2:~# INFO: BL31: Initializing runtime services -bash: INFO:: command not found root@lubancat-3-v2:~# WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK > ERROR: Error initializing runtime service opteed_fast > INFO: BL31: Preparing for EL3 exit to normal world > INFO: Entry point address = 0x40800000 > INFO: SPSR = 0x3c9 > > > U-Boot 2026.07_armbian-2026.07-Sece3-P4dba-H1974-V0a2c-B6a81-R448a (Sep 12 2026 - 23:34:04 +0000) > > Model: EmbedFire LubanCat-3-v2 > SoC: RK3576 > DRAM: 4 GiB > PMIC: RK806 (on=0x40, off=0x00) > Core: 991 devices, 26 uclasses, devicetree: separate > MMC: mmc@2a310000: 0, mmc@2a330000: 1 > Loading Environment from nowhere... OK > In: serial@2ad40000 > Out: serial@2ad40000 > Err: serial@2ad40000 > Net: No ethernet found. > Hit any key to stop autoboot: 0 > Scanning for bootflows in all bootdevs > Seq Method State Uclass Part Name Filename > --- ----------- ------ -------- ---- ------------------------ ---------------- > Scanning global bootmeth 'efi_mgr': > Card did not respond to voltage select! : -110 > Cannot persist EFI variables without system partition > 0 efi_mgr ready (none) 0 <NULL> > ** Booting bootflow '<NULL>' with efi_mgr > Loading Boot0000 'mmc 1' failed > EFI boot manager: Cannot load any image [fdt_fixup_ethernet] alias #0: name='i2c0', path='/soc/i2c@27300000' [fdt_fixup_ethernet] alias #1: name='i2c1', path='/soc/i2c@2ac40000' [fdt_fixup_ethernet] alias #2: name='i2c2', path='/soc/i2c@2ac50000' [fdt_fixup_ethernet] alias #3: name='i2c3', path='/soc/i2c@2ac60000' [fdt_fixup_ethernet] alias #4: name='i2c4', path='/soc/i2c@2ac70000' [fdt_fixup_ethernet] alias #5: name='i2c5', path='/soc/i2c@2ac80000' [fdt_fixup_ethernet] alias #6: name='i2c6', path='/soc/i2c@2ac90000' [fdt_fixup_ethernet] alias #7: name='i2c7', path='/soc/i2c@2aca0000' [fdt_fixup_ethernet] alias #8: name='i2c8', path='/soc/i2c@2acb0000' [fdt_fixup_ethernet] alias #9: name='i2c9', path='/soc/i2c@2ae80000' [fdt_fixup_ethernet] alias #10: name='serial0', path='/soc/serial@2ad40000' [fdt_fixup_ethernet] alias #11: name='serial1', path='/soc/serial@27310000' [fdt_fixup_ethernet] alias #12: name='serial2', path='/soc/serial@2ad50000' [fdt_fixup_ethernet] alias #13: name='serial3', path='/soc/serial@2ad60000' [fdt_fixup_ethernet] alias #14: name='serial4', path='/soc/serial@2ad70000' [fdt_fixup_ethernet] alias #15: name='serial5', path='/soc/serial@2ad80000' [fdt_fixup_ethernet] alias #16: name='serial6', path='/soc/serial@2ad90000' [fdt_fixup_ethernet] alias #17: name='serial7', path='/soc/serial@2ada0000' [fdt_fixup_ethernet] alias #18: name='serial8', path='/soc/serial@2adb0000' [fdt_fixup_ethernet] alias #19: name='serial9', path='/soc/serial@2adc0000' [fdt_fixup_ethernet] alias #20: name='serial10', path='/soc/serial@2afc0000' [fdt_fixup_ethernet] alias #21: name='serial11', path='/soc/serial@2afd0000' [fdt_fixup_ethernet] alias #22: name='spi0', path='/soc/spi@2acf0000' [fdt_fixup_ethernet] alias #23: name='spi1', path='/soc/spi@2ad00000' [fdt_fixup_ethernet] alias #24: name='spi2', path='/soc/spi@2ad10000' [fdt_fixup_ethernet] alias #25: name='spi3', path='/soc/spi@2ad20000' [fdt_fixup_ethernet] alias #26: name='spi4', path='/soc/spi@2ad30000' [fdt_fixup_ethernet] alias #27: name='ethernet0', path='/soc/ethernet@2a220000' [fdt_fixup_ethernet] env var for alias 'ethernet0' is 'ethaddr', value='52:ad:5a:0e:09:87' [fdt_fixup_ethernet] Patching node '/soc/ethernet@2a220000' (offset 91448) with MAC 52:ad:5a:0e:09:87 [fdt_fixup_ethernet] alias #28: name='mmc0', path='/soc/mmc@2a310000' [fdt_fixup_ethernet] alias #29: name='mmc1', path='/soc/mmc@2a330000' [fdt_fixup_ethernet] alias #30: name='rtc0', path='/soc/i2c@2ac60000/rtc@51' [fdt_fixup_ethernet] SUMMARY: aliases found=31, attempted=1, skipped=0, patched=1 Starting kernel ... Build with: ./compile.sh BOARD=lubancat-3-v2 BRANCH=current BUILD_DESKTOP=no BUILD_MINIMAL=yes KERNEL_CONFIGURE=no INSTALL_HEADERS=yes RELEASE=resolute $ armbianmonitor -u https://paste.armbian.com/efawuhoguq https://paste.armbian.com/evuboloxop
September 13Sep 13 Author @Boardcon_yang here are the boot logs using this loader for mainline 7.2.5-edge-rockchip64: Quote ▒DDR 2f85f4b2d4 cym 25/02/06-17:25.41,fwver: v1.09 In ch0 ttot10 ch1 ttot10 ch0 ttot16 LPDDR4X, 1848MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB ch1 ttot16 channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB Manufacturer ID:0x13 CH0 RX Vref:25.7%, RX DQS Vref:30.4%, TX Vref:22.8%,22.8% DQ roc: p1 n0, p0 n3, p4 n1, p2 n1, p4 n1, p1 n0, p0 n0, p5 n0, p0 n0, p3 n4, p3 n0, p4 n0, p2 n2, p7 n0, p3 n7, p3 n1, p6 n0, p0 n0, DQ rds:l0 l0 l0 l0 l0 l0 l0 l0, l0 l0 l0 h1 l0 l0 l0 l0 DQS roc: p3, n2, p1, n0 CH1 RX Vref:25.7%, RX DQS Vref:31.6%, TX Vref:23.8%,20.8% DQ roc: p2 n0, p0 n0, p1 n1, p2 n5, p4 n0, p0 n2, p4 n0, p1 n2, p1 n0, p1 n0, p7 n0, p1 n1, p1 n0, p5 n0, p6 n0, p0 n0, p6 n0, p5 n0, DQ rds:l0 l0 l0 l0 h1 l0 l0 l0, l0 l0 l0 l0 l0 h1 l0 l0 DQS roc: p1, n0, p2, n0 stride=0x3, ddr_config=0x4 hash bank_mask0-3 0x0 0x880 0x1100 0x2200, rank_mask0 0x400400 change to F1: 528MHz ch0 ttot10 ch1 ttot10 change to F2: 1068MHz ch0 ttot12 ch1 ttot12 change to F3: 1560MHz ch0 ttot14 ch1 ttot14 change to F0: 1848MHz ch0 ttot16 ch1 ttot16 out USB-PLUG 2017.09-g13ceb2afdcb-241106 #lxh (Nov 07 2024 - 16:10:03 +0800) Serial: raw, 0x2ad40000 scanning bus for devices... Timedout waiting for UIC response Timedout waiting for UIC response Timedout waiting for UIC response Timedout waiting for UIC response link startup failed -110 ufshcd_pltfrm_init() failed -110 Scandev: scsi 0 m0 mmc@2a330000: 0 Scandev: mmc 0 m0 Bootdev: mmc 0 RKUSB: LUN 0, dev 0, hwpart 0, sector 0x0, count 0x3a40000 /usb device is high-speed |DDR fcb0cfd52f cym 24/10/09-19:36:03,fwver: v1.08 In ch0 ttot10 ch1 ttot10 ch0 ttot16 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB ch1 ttot16 channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB Manufacturer ID:0x13 CH0 RX Vref:24.5%, RX DQS Vref:30.0%, TX Vref:22.8%,22.8% DQ roc: p0 n0, p0 n4, p1 n1, p0 n0, p0 n0, p0 n0, p0 n1, p5 n0, p0 n1, p0 n0, p6 n1, p6 n0, p0 n0, p2 n0, p0 n2, p2 n0, p4 n0, p3 n6, DQ rds:l0 l0 l0 l0 l0 l0 l0 l0, l0 l0 l0 l0 l0 l0 l0 l0 DQS roc: p0, n0, p0, n0 CH1 RX Vref:24.9%, RX DQS Vref:31.2%, TX Vref:23.8%,21.8% DQ roc: p1 n0, p0 n1, p0 n0, p0 n2, p3 n0, p0 n4, p3 n0, p0 n0, p0 n0, p3 n7, p3 n0, p0 n0, p3 n4, p7 n0, p6 n0, p0 n0, p2 n0, p6 n0, DQ rds:l0 l0 l0 l0 l0 l0 l0 l0, l0 l0 l0 l0 l0 l0 l0 l0 DQS roc: p0, n1, p2, n0 stride=0x3, ddr_config=0x4 hash bank_mask0-3 0x0 0x880 0x1100 0x2200, rank_mask0 0x400400 change to F1: 528MHz ch0 ttot10 ch1 ttot10 change to F2: 1068MHz ch0 ttot12 ch1 ttot12 change to F3: 1560MHz ch0 ttot14 ch1 ttot14 change to F0: 2112MHz ch0 ttot16 ch1 ttot16 out U-Boot SPL 2026.07_armbian-2026.07-Sece3-P4dba-H1974-V0a2c-B6a81-R448a (Sep 13 2026 - 00:56:24 +0000) Trying to boot from MMC2 ## Checking hash(es) for config config-1 ... OK ## Checking hash(es) for Image atf-1 ... sha256+ OK ## Checking hash(es) for Image u-boot ... sha256+ OK ## Checking hash(es) for Image fdt-1 ... sha256+ OK ## Checking hash(es) for Image atf-2 ... sha256+ OK ## Checking hash(es) for Image atf-3 ... sha256+ OK INFO: Preloader serial: 0 NOTICE: BL31: v2.3():v2.3-931-g4d7e811c6:derrick.huang, fwver: v1.20 NOTICE: BL31: Built : 19:19:38, May 26 2025 INFO: SOC (0x35760101) INFO: spec: 0x1 INFO: test version: 0x0 INFO: cost 376989 us before hptimer restart INFO: soc cold boot INFO: ARM GICv2 driver initialized INFO: bypass memory repair INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz INFO: Using opteed sec cpu_context! INFO: boot cpu mask: 1 INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x40800000 INFO: SPSR = 0x3c9 U-Boot 2026.07_armbian-2026.07-Sece3-P4dba-H1974-V0a2c-B6a81-R448a (Sep 13 2026 - 00:56:24 +0000) Model: EmbedFire LubanCat-3-v2 SoC: RK3576 DRAM: 4 GiB PMIC: RK806 (on=0x40, off=0x00) Core: 991 devices, 26 uclasses, devicetree: separate MMC: mmc@2a310000: 0, mmc@2a330000: 1 Loading Environment from nowhere... OK In: serial@2ad40000 Out: serial@2ad40000 Err: serial@2ad40000 Net: No ethernet found. Hit any key to stop autoboot: 0 Scanning for bootflows in all bootdevs Seq Method State Uclass Part Name Filename --- ----------- ------ -------- ---- ------------------------ ---------------- Scanning global bootmeth 'efi_mgr': Card did not respond to voltage select! : -110 Cannot persist EFI variables without system partition 0 efi_mgr ready (none) 0 <NULL> ** Booting bootflow '<NULL>' with efi_mgr Loading Boot0000 'mmc 1' failed EFI boot manager: Cannot load any image Boot failed (err=-14) Scanning bootdev 'mmc@2a330000.bootdev': 1 script ready mmc 1 mmc@2a330000.bootdev.part /boot/boot.scr ** Booting bootflow 'mmc@2a330000.bootdev.part_1' with script Boot script loaded from mmc 1:1 170 bytes read in 11 ms (14.6 KiB/s) 25059139 bytes read in 155 ms (154.2 MiB/s) 38590976 bytes read in 246 ms (149.6 MiB/s) 188838 bytes read in 49 ms (3.7 MiB/s) Working FDT set to 52000000 Trying kaslrseed command... Info: Unknown command can be safely ignored since kaslrseed does not apply to all boards. Unknown command 'kaslrseed' - try 'help' ## Loading init Ramdisk from Legacy Image at 52180000 ... Image Name: uInitrd Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 25059075 Bytes = 23.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 52000000 Booting using the fdt blob at 0x52000000 Working FDT set to 52000000 Loading Ramdisk to fb41a000, end fcbfff03 ... OK Loading Device Tree to 00000000fce27000, end 00000000fcebdfff ... OK Working FDT set to fce27000 Build with: ./compile.sh BOARD=lubancat-3-v2 BRANCH=current BUILD_DESKTOP=no BUILD_MINIMAL=yes KERNEL_CONFIGURE=no INSTALL_HEADERS=yes RELEASE=resolute $ armbianmonitor -u https://paste.armbian.com/wagupuyopi
September 13Sep 13 Author PR: https://github.com/armbian/build/pull/10689 Build with: ./compile.sh BOARD=lubancat-3-v2 BRANCH=bleedingedge BUILD_DESKTOP=no BUILD_MINIMAL=yes KERNEL_CONFIGURE=no INSTALL_HEADERS=yes RELEASE=resolute Tested again on bleedingedge 7.3.0-RC2 https://paste.armbian.com/mesigeruda
September 14Sep 14 Author Build vendor again https://github.com/armbian/linux-rockchip/pull/549 merged and closed let'me build it again edit: Build Logs: https://paste.armbian.com/ifaxolareb Board Logs: https://paste.armbian.com/fisozesesu Boot logs: Quote USB-PLUG 2017.09-g13ceb2afdcb-241106 #lxh (Nov 07 2024 - 16:10:03 +0800) Serial: raw, 0x2ad40000 scanning bus for devices... Timedout waiting for UIC response Timedout waiting for UIC response Timedout waiting for UIC response Timedout waiting for UIC response link startup failed -110 ufshcd_pltfrm_init() failed -110 Scandev: scsi 0 m0 mmc@2a330000: 0 Scandev: mmc 0 m0 Bootdev: mmc 0 RKUSB: LUN 0, dev 0, hwpart 0, sector 0x0, count 0x3a40000 /usb device is high-speed \DDR fcb0cfd52f cym 24/10/09-19:36:03,fwver: v1.08 In ch0 ttot10 ch1 ttot10 ch0 ttot16 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB ch1 ttot16 channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB Manufacturer ID:0x13 CH0 RX Vref:24.5%, RX DQS Vref:30.0%, TX Vref:22.8%,22.8% DQ roc: p0 n1, p0 n4, p1 n0, p0 n0, p1 n2, p0 n0, p1 n3, p5 n0, p0 n1, p0 n1, p4 n1, p3 n0, p0 n0, p5 n0, p0 n3, p3 n0, p6 n0, p3 n7, DQ rds:l0 l0 l0 l0 l0 l0 l0 l0, l0 l0 l0 l0 l0 l0 l0 l0 DQS roc: p0, n1, p1, n1 CH1 RX Vref:24.9%, RX DQS Vref:31.2%, TX Vref:23.8%,21.8% DQ roc: p2 n0, p3 n3, p0 n0, p0 n1, p3 n0, p0 n3, p2 n0, p0 n1, p0 n0, p0 n1, p4 n0, p0 n0, p1 n1, p6 n0, p7 n0, p0 n0, p2 n0, p7 n0, DQ rds:l0 l0 l0 l0 l0 l0 l0 l0, l0 l0 l0 l0 l0 l0 l0 l0 DQS roc: p0, n1, p2, n0 stride=0x3, ddr_config=0x4 hash bank_mask0-3 0x0 0x880 0x1100 0x2200, rank_mask0 0x400400 change to F1: 528MHz ch0 ttot10 ch1 ttot10 change to F2: 1068MHz ch0 ttot12 ch1 ttot12 change to F3: 1560MHz ch0 ttot14 ch1 ttot14 change to F0: 2112MHz ch0 ttot16 ch1 ttot16 out U-Boot SPL 2026.07_armbian-2026.07-Sece3-Pa416-H1974-V8d8e-B6a81-R448a (Sep 14 2026 - 17:25:32 +0000) Trying to boot from MMC2 ## Checking hash(es) for config config-1 ... OK ## Checking hash(es) for Image atf-1 ... sha256+ OK ## Checking hash(es) for Image u-boot ... sha256+ OK ## Checking hash(es) for Image fdt-1 ... sha256+ OK ## Checking hash(es) for Image atf-2 ... sha256+ OK ## Checking hash(es) for Image atf-3 ... sha256+ OK INFO: Preloader serial: 0 NOTICE: BL31: v2.3():v2.3-931-g4d7e811c6:derrick.huang, fwver: v1.20 NOTICE: BL31: Built : 19:19:38, May 26 2025 INFO: SOC (0x35760101) INFO: spec: 0x1 INFO: test version: 0x0 INFO: cost 375702 us before hptimer restart INFO: soc cold boot INFO: ARM GICv2 driver initialized INFO: bypass memory repair INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz INFO: Using opteed sec cpu_context! INFO: boot cpu mask: 1 INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x40800000 INFO: SPSR = 0x3c9 U-Boot 2026.07_armbian-2026.07-Sece3-Pa416-H1974-V8d8e-B6a81-R448a (Sep 14 2026 - 17:25:32 +0000) Model: EmbedFire LubanCat-3-v2 SoC: RK3576 DRAM: 4 GiB PMIC: RK806 (on=0x40, off=0x00) Core: 992 devices, 26 uclasses, devicetree: separate MMC: mmc@2a310000: 0, mmc@2a330000: 1 Loading Environment from nowhere... OK In: serial@2ad40000 Out: serial@2ad40000 Err: serial@2ad40000 Net: No ethernet found. Hit any key to stop autoboot: 0 Scanning for bootflows in all bootdevs Seq Method State Uclass Part Name Filename --- ----------- ------ -------- ---- ------------------------ ---------------- Scanning global bootmeth 'efi_mgr': Card did not respond to voltage select! : -110 Cannot persist EFI variables without system partition 0 efi_mgr ready (none) 0 <NULL> ** Booting bootflow '<NULL>' with efi_mgr Loading Boot0000 'mmc 1' failed EFI boot manager: Cannot load any image Boot failed (err=-14) Scanning bootdev 'mmc@2a330000.bootdev': 1 script ready mmc 1 mmc@2a330000.bootdev.part /boot/boot.scr ** Booting bootflow 'mmc@2a330000.bootdev.part_1' with script Boot script loaded from mmc 1:1 169 bytes read in 13 ms (12.7 KiB/s) 20044684 bytes read in 130 ms (147 MiB/s) 47190528 bytes read in 279 ms (161.3 MiB/s) 310729 bytes read in 68 ms (4.4 MiB/s) Working FDT set to 52000000 Trying kaslrseed command... Info: Unknown command can be safely ignored since kaslrseed does not apply to all boards. Unknown command 'kaslrseed' - try 'help' ## Loading init Ramdisk from Legacy Image at 52180000 ... Image Name: uInitrd Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 20044620 Bytes = 19.1 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 52000000 Booting using the fdt blob at 0x52000000 Working FDT set to 52000000 Loading Ramdisk to fb8e2000, end fcbffb4c ... OK Loading Device Tree to 00000000fce09000, end 00000000fcebdfff ... OK Working FDT set to fce09000 [image_setup_libfdt] called [image_setup_libfdt] calling fdt_fixup_ethernet [fdt_fixup_ethernet] called [fdt_fixup_ethernet] alias #0: name='csi2dcphy0', path='/csi2-dcphy0' [fdt_fixup_ethernet] alias #1: name='csi2dphy0', path='/csi2-dphy0' [fdt_fixup_ethernet] alias #2: name='csi2dphy1', path='/csi2-dphy1' [fdt_fixup_ethernet] alias #3: name='csi2dphy2', path='/csi2-dphy2' [fdt_fixup_ethernet] alias #4: name='csi2dphy3', path='/csi2-dphy3' [fdt_fixup_ethernet] alias #5: name='csi2dphy4', path='/csi2-dphy4' [fdt_fixup_ethernet] alias #6: name='csi2dphy5', path='/csi2-dphy5' [fdt_fixup_ethernet] alias #7: name='ethernet0', path='/ethernet@2a220000' [fdt_fixup_ethernet] env var for alias 'ethernet0' is 'ethaddr', value='52:ad:5a:0e:09:87' [fdt_fixup_ethernet] Patching node '/ethernet@2a220000' (offset 91128) with MAC 52:ad:5a:0e:09:87 [fdt_fixup_ethernet] alias #8: name='ethernet1', path='/ethernet@2a230000' [fdt_fixup_ethernet] env var for alias 'ethernet1' is 'eth1addr', value='52:ad:5a:0e:09:86' [fdt_fixup_ethernet] Node '/ethernet@2a230000' status is 'disabled', skipping [fdt_fixup_ethernet] alias #9: name='gpio0', path='/pinctrl/gpio@27320000' [fdt_fixup_ethernet] alias #10: name='gpio1', path='/pinctrl/gpio@2ae10000' [fdt_fixup_ethernet] alias #11: name='gpio2', path='/pinctrl/gpio@2ae20000' [fdt_fixup_ethernet] alias #12: name='gpio3', path='/pinctrl/gpio@2ae30000' [fdt_fixup_ethernet] alias #13: name='gpio4', path='/pinctrl/gpio@2ae40000' [fdt_fixup_ethernet] alias #14: name='hdcp0', path='/hdcp@27d90000' [fdt_fixup_ethernet] alias #15: name='hdcp1', path='/hdcp@27e70000' [fdt_fixup_ethernet] alias #16: name='i2c0', path='/i2c@27300000' [fdt_fixup_ethernet] alias #17: name='i2c1', path='/i2c@2ac40000' [fdt_fixup_ethernet] alias #18: name='i2c2', path='/i2c@2ac50000' [fdt_fixup_ethernet] alias #19: name='i2c3', path='/i2c@2ac60000' [fdt_fixup_ethernet] alias #20: name='i2c4', path='/i2c@2ac70000' [fdt_fixup_ethernet] alias #21: name='i2c5', path='/i2c@2ac80000' [fdt_fixup_ethernet] alias #22: name='i2c6', path='/i2c@2ac90000' [fdt_fixup_ethernet] alias #23: name='i2c7', path='/i2c@2aca0000' [fdt_fixup_ethernet] alias #24: name='i2c8', path='/i2c@2acb0000' [fdt_fixup_ethernet] alias #25: name='i2c9', path='/i2c@2ae80000' [fdt_fixup_ethernet] alias #26: name='i3c0', path='/i3c-master@2abe0000' [fdt_fixup_ethernet] alias #27: name='i3c1', path='/i3c-master@2abf0000' [fdt_fixup_ethernet] alias #28: name='rkcif_mipi_lvds0', path='/rkcif-mipi-lvds' [fdt_fixup_ethernet] alias #29: name='rkcif_mipi_lvds1', path='/rkcif-mipi-lvds1' [fdt_fixup_ethernet] alias #30: name='rkcif_mipi_lvds2', path='/rkcif-mipi-lvds2' [fdt_fixup_ethernet] alias #31: name='rkcif_mipi_lvds3', path='/rkcif-mipi-lvds3' [fdt_fixup_ethernet] alias #32: name='rkcif_mipi_lvds4', path='/rkcif-mipi-lvds4' [fdt_fixup_ethernet] alias #33: name='serial0', path='/serial@2ad40000' [fdt_fixup_ethernet] alias #34: name='serial1', path='/serial@27310000' [fdt_fixup_ethernet] alias #35: name='serial2', path='/serial@2ad50000' [fdt_fixup_ethernet] alias #36: name='serial3', path='/serial@2ad60000' [fdt_fixup_ethernet] alias #37: name='serial4', path='/serial@2ad70000' [fdt_fixup_ethernet] alias #38: name='serial5', path='/serial@2ad80000' [fdt_fixup_ethernet] alias #39: name='serial6', path='/serial@2ad90000' [fdt_fixup_ethernet] alias #40: name='serial7', path='/serial@2ada0000' [fdt_fixup_ethernet] alias #41: name='serial8', path='/serial@2adb0000' [fdt_fixup_ethernet] alias #42: name='serial9', path='/serial@2adc0000' [fdt_fixup_ethernet] alias #43: name='serial10', path='/serial@2afc0000' [fdt_fixup_ethernet] alias #44: name='serial11', path='/serial@2afd0000' [fdt_fixup_ethernet] alias #45: name='spi0', path='/spi@2acf0000' [fdt_fixup_ethernet] alias #46: name='spi1', path='/spi@2ad00000' [fdt_fixup_ethernet] alias #47: name='spi2', path='/spi@2ad10000' [fdt_fixup_ethernet] alias #48: name='spi3', path='/spi@2ad20000' [fdt_fixup_ethernet] alias #49: name='spi4', path='/spi@2ad30000' [fdt_fixup_ethernet] alias #50: name='spi5', path='/spi@2a340000' [fdt_fixup_ethernet] alias #51: name='spi6', path='/spi@2a300000' [fdt_fixup_ethernet] alias #52: name='spi7', path='/flexbus@2a2f0000/spi' [fdt_fixup_ethernet] alias #53: name='spi8', path='/flexbus@2a2f0000/fspi' [fdt_fixup_ethernet] alias #54: name='mmc0', path='/mmc@2a330000' [fdt_fixup_ethernet] alias #55: name='mmc1', path='/mmc@2a310000' [fdt_fixup_ethernet] alias #56: name='mmc2', path='/mmc@2a320000' [fdt_fixup_ethernet] SUMMARY: aliases found=57, attempted=2, skipped=1, patched=1 Starting kernel ...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.