On 4/6/2018 at 4:33 PM, Arkimede said:

All right, the wi-fi now works:

You need to create the file /etc/modprobe.d/ssv6051.conf

and enter the path to the driver configuration file

(type in file)

options ssv6051 stacfgpath = / lib / firmware / ssv6051 / ssv6051-wifi.cfg

You must also configure the wpa_supplicant for network access.

 

 

Hi Arkimede,

I'm trying to run Armbian_5.44_S9xxx_Ubuntu_xenial_3.14.29_mate_20180515.img.xz on X96 mini with 2GB RAM, but I'm getting:

 

mlogic:~$ dmesg | grep ssv
               *** sta_cfg_set, /usr/lib/firmware/ssv6051/ssv6051-wifi.cfg ***
[   13.564886] WARNING: CPU: 0 PID: 2865 at drivers/amlogic/wifi/ssv6051/ssvdevice/ssvdevice.c:159 sta_cfg_set+0x1dc/0x220 [ssv6051]()
[   13.564896] Modules linked in: ssv6051(+) mac80211 cfg80211 aml_nftl_dev(P)
[   13.564966] [<ffffffbffc1455f0>] sta_cfg_set+0x1d8/0x220 [ssv6051]
[   13.564981] [<ffffffbffc145714>] ssvdevice_init+0xdc/0x120 [ssv6051]
[   13.565000] [<ffffffbffc177094>] $x+0x94/0x108 [ssv6051]
[   13.565272] ssv6xxx_sdio_init
[   13.565575] ssv6xxx_set_sdio_clk:set sdio clk 25000000Hz
[   13.595828] ssv6xxx_sdio_power_on
[   13.608526] ssv6xxx_dev_probe(): ssv6200 device found !
[   13.608605] WARNING: CPU: 0 PID: 2865 at drivers/amlogic/wifi/ssv6051/smac/init.c:1376 ssv6xxx_dev_probe+0x1180/0x19e8 [ssv6051]()
[   13.608615] Modules linked in: ssv6051(+) mac80211 cfg80211 aml_nftl_dev(P)
[   13.608673] [<ffffffbffc14dff4>] ssv6xxx_dev_probe+0x117c/0x19e8 [ssv6051]
[   13.608730] [<ffffffbffc1645b4>] ssv6xxx_sdio_probe+0x31c/0x3c0 [ssv6051]
[   13.608783] [<ffffffbffc1640c4>] ssv6xxx_sdio_init+0x24/0x30 [ssv6051]
[   13.608797] [<ffffffbffc145738>] ssvdevice_init+0x100/0x120 [ssv6051]
[   13.608815] [<ffffffbffc177094>] $x+0x94/0x108 [ssv6051]
[   13.608838] SSV WLAN driver ssv6200: Failed to initialize device
[   13.608866] SSV WLAN driver: probe of ssv6200 failed with error -12

I followed your recommendation form above but I got an error that stacfgpath is an unsupported option, but I think we don't need that. What I'm doing wrong?

 

Otherwise the WiFi worked as charm with USB Realtek WiFi dongle.

 

Thanks!

On 5/26/2018 at 1:01 PM, pisach said:

 

 

Hi Arkimede,

I'm trying to run Armbian_5.44_S9xxx_Ubuntu_xenial_3.14.29_mate_20180515.img.xz on X96 mini with 2GB RAM, but I'm getting:

 

mlogic:~$ dmesg | grep ssv
               *** sta_cfg_set, /usr/lib/firmware/ssv6051/ssv6051-wifi.cfg ***
[   13.564886] WARNING: CPU: 0 PID: 2865 at drivers/amlogic/wifi/ssv6051/ssvdevice/ssvdevice.c:159 sta_cfg_set+0x1dc/0x220 [ssv6051]()
[   13.564896] Modules linked in: ssv6051(+) mac80211 cfg80211 aml_nftl_dev(P)
[   13.564966] [<ffffffbffc1455f0>] sta_cfg_set+0x1d8/0x220 [ssv6051]
[   13.564981] [<ffffffbffc145714>] ssvdevice_init+0xdc/0x120 [ssv6051]
[   13.565000] [<ffffffbffc177094>] $x+0x94/0x108 [ssv6051]
[   13.565272] ssv6xxx_sdio_init
[   13.565575] ssv6xxx_set_sdio_clk:set sdio clk 25000000Hz
[   13.595828] ssv6xxx_sdio_power_on
[   13.608526] ssv6xxx_dev_probe(): ssv6200 device found !
[   13.608605] WARNING: CPU: 0 PID: 2865 at drivers/amlogic/wifi/ssv6051/smac/init.c:1376 ssv6xxx_dev_probe+0x1180/0x19e8 [ssv6051]()
[   13.608615] Modules linked in: ssv6051(+) mac80211 cfg80211 aml_nftl_dev(P)
[   13.608673] [<ffffffbffc14dff4>] ssv6xxx_dev_probe+0x117c/0x19e8 [ssv6051]
[   13.608730] [<ffffffbffc1645b4>] ssv6xxx_sdio_probe+0x31c/0x3c0 [ssv6051]
[   13.608783] [<ffffffbffc1640c4>] ssv6xxx_sdio_init+0x24/0x30 [ssv6051]
[   13.608797] [<ffffffbffc145738>] ssvdevice_init+0x100/0x120 [ssv6051]
[   13.608815] [<ffffffbffc177094>] $x+0x94/0x108 [ssv6051]
[   13.608838] SSV WLAN driver ssv6200: Failed to initialize device
[   13.608866] SSV WLAN driver: probe of ssv6200 failed with error -12

I followed your recommendation form above but I got an error that stacfgpath is an unsupported option, but I think we don't need that. What I'm doing wrong?

  

Otherwise the WiFi worked as charm with USB Realtek WiFi dongle.

 

Thanks!

 

I solved that with creating symlink :-)

 

Now it's fine

Hi,

 

I've also bought a TV Box with S905W chip.

 

Tried armbian 5.44 but it didn't boot.

So I tried 5.37 and got the prompt !

 

After installing to nand, I could'nt use sudo, many permissions were set wrong (wrong owner/group, etc...). I had to set them manually on many folders (/bin , /usr , /lib, /etc....).

 

Now I'd like to use and external usb SSD as my root partition. I tried to modify the /etc/fstab file, but it seems that it's not the good place

Perhaps a file in /boot ?

Sorry to necro an old thread, but I have managed to get the all the usb ports working on my MXQ Pro 4k s905w . I noticed there was no clock crystal soldered on near the usb hub chip, I happened to have a 12mhz crystal lying around and tried it. Not sure how they were making it work in android, but I have the android dts file if someone smarter than me wants to go through it.

Now I'm just looking for an older image so I can have wifi as well. The older links in this thread seem dead.