Skip to content
View in the app

A better way to browse. Learn more.

Armbian Community Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

the network always crashed in nanopi m4

Featured Replies

Here I found a bug in Nanopi M4.

When I download BitTorrent file through ipv6(use Transmission,qbittorent...),the network will crashed.

And I even can't ping it successful.

When I connect it in local.I don't see any log in the network service.

And when I replace the network card(1000Mb) with a usb network card.

The network work very good.And didn't appear any problem.

I have try all the linux system include the office system.

the problem happen again.

So I only can use the usb network card or wifi.

Does anyone who know how to solve the problem???

I would be very grateful for it.

I noticed a same problem in firely board.

if it is the same problem??

http://dev.t-firefly.com/thread-11741-2-1.html

and he change the kernel in this way:

 &gmac {

         phy-supply = <&vcc_phy>;

         phy-mode = "rgmii";

         clock_in_out = "input";

         snps,reset-gpio = <&gpio3 15 GPIO_ACTIVE_LOW>;

         snps,reset-active-low;

         snps,reset-delays-us = <0 10000 50000>;

         assigned-clocks = <&cru SCLK_RMII_SRC>;

         assigned-clock-parents = <&clkin_gmac>;

         pinctrl-names = "default";

         pinctrl-0 = <&rgmii_pins>;

         tx_delay = <0x28>;

 -       rx_delay = <0x11>;

+       rx_delay = <0x1B>;

         status = "okay";

 };

I don't know if it work.

And I didn't know how to change it in the kernel files.

I am poor in this work.

I also find that the nanopi m4 use the st_gmac driver for eth0 1000m.

And I'm sure it has some bug.

When I use the usb card drvier for usb card.Every thing work good.

Guest
This topic is now closed to further replies.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.