pkfox

Apologies this seems to have posted twice could admin please delete one of them Hi all, I built an image for my new Odroid M2 16 GB board using the parameters in my config-odroid.conf BOARD=odroidm2 RELEASE=trixie BUILD_DESKTOP=no BUILD_MINIMAL=yes KERNEL_CONFIGURE=no Issued compile.sh odroid It built and booted first time I configured it using armbian-install to boot from the emmc and use a 1tb Samsung nvme as the system disk Rebooted after removing the sdcard Everything seemed to work until I tried to flash another image to the sdcard with dd The flash immediately stalled and killed my windows Putty session Some of the errors from dmesg mmc1: Card stuck being busy! __mmc_poll_for_busy dwmmc_rockchip fe2c0000.mmc: Busy; trying anyway mmc_host mmc1: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80200000) GPT PMBR size mismatch (7675903 != 62333951) The primary GPT table is corrupt, but the backup appears OK. I have no idea what to do My intention was to try different images to ascertain which worked best which I can still do but i have to flash the card on another box I hope this makes sense Kind regards Pete Kane

Hi all, I built an image for my new Odroid M2 16 GB board using the parameters in my config-odroid.conf ``` BOARD=odroidm2 RELEASE=trixie BUILD_DESKTOP=no BUILD_MINIMAL=yes KERNEL_CONFIGURE=no ``` And issued compile.sh odroid It built and booted first time I configured it using armbian-install to boot from the emmc and use the 1tb Samsung nvme as the system disk Rebooted after removing the sdcard Everything seemed to work until I tried to flash an image to the sdcard with dd The flash immediately stalled and killed my Putty session Some of the errors from dmesg ``` mmc1: Card stuck being busy! __mmc_poll_for_busy dwmmc_rockchip fe2c0000.mmc: Busy; trying anyway mmc_host mmc1: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80200000) ```

I flashed a home built nanpim4v2 image to two brand new Silicon Power 32GB sdcards and they wont boot whereas SanDisk 32GB boot OK can anyone explain why ?

Thanks @Werner

Thanks very much @c0rnelius

I wonder what the chances of that happening are - do you think I can use the rpi4b config ?

Hi guys I cloned the build earlier with a view to building an image for a rpi5b git clone --depth 1 --branch main https://github.com/armbian/build and build/config/boards/rpi5b.csc was present. I've just refreshed the clone and it's not there - has it been removed for some reason ? Edit It's not on github either - am I going mad ? 🙂

I've recently used armbian-install to enable booting from my nvme/ssd drive and all appears to be working fine. However, I'm curious to know, why, the device is mounted twice as shown below. The / mount point is in /etc/fstab but where/how does the device get mounted again on /var/log.hdd. mount|grep nvme /dev/nvme0n1p1 on / type ext4 (rw,noatime,errors=remount-ro,commit=120) /dev/nvme0n1p1 on /var/log.hdd type ext4 (rw,noatime,errors=remount-ro,commit=120)

Ok thanks @Werner

Hi all, is it possible to boot from an NVME without a sdcard ?

Your suggestion worked thanks again @c0rnelius

Ah that's good to know thanks very much for your help - are you a kernel developer ?

Good stuff thanks - why put them in /lib/firmware/updates ? I'm not doubting you just tring to make sense of all this 😀

I'll give it a try - are these the broadcom blobs ?

That's probably what I'll do - I'm fairly sure it's broadcom related - I have another pi 5 with raspbian installed (which has wlan0 present by default) so I can probably glean some info there - wish me luck

Your suggestion of wget and install worked perfectly so thanks @Werner now I'll have to ascertain which blob is doing the business - any idea as to how I can do that ? thanks again

Anyway have you checked if the armbian-firmware-full packages actually contains the necessary blobs you are looking for? No, I don't know what blobs I need, all I know is, wlan0 appears after I install armbian-firmware-full and reboot - is it because my build machine isn't running armbian that the armbian mirrors are not found - could I add them to my /etc/apt/sources.list ? getting desperate now 😀

I think we're done on this question I'll go and post in the build forum now - thanks very much for your help @Werner

Hi all, I'm building a rpi5b image with some success. My build machine is a x86_64 GNU/Linux with a 1gb ssd and 32gb of ram . The image builds and boots fine but there is no wlan0 device available in the booted image. I can get it by installing the armbian-firmware-full package and rebooting apt install -y armbian-firmware-full reboot I thought I could include the install in the customize-image.sh script but I get an error E: Unable to locate package armbian-firmware-full ( line 515 in the log ) - any ideas guys

Tried with PASTE_URL="https://paste.armbian.de/log" and I get a curl command When I run it curl --data-binary @build/output/logs/log-build-36b7b9d7-5385-49d0-ac61-9f6f8603c700.log.ans https://paste.armbian.de/log I get https://paste.armbian.de/usunowihox which looks promising

With SHARE_LOG=no I get this [🌿] Share log manually (or SHARE_LOG=yes): [ curl --data-binary @output/logs/log-build-e56c01c4-5313-440a-bf8c-da532052dea2.log.ans https://paste.armbian.com/log ]

I'll give it a shot thanks @Werner

Hi @Werner I ran the build again and I see this at the end 🌱] SHARE_LOG=yes, uploading log [ uploading logs ] [🌿] Log uploaded, share URL: [ <!DOCTYPE html> <html lang=en> <head> <meta charset=utf-8> <title>Error</title> </head> <body> <pre>Cannot POST /log</pre> </body> </html> ]

Thank you @Werner I'll take a look

Hi all, apologies I know this isn't the correct forum to post,but, I have a question regarding the armbian build process for a raspi5b , but unfortunately I can't post in the correct forum because It requires the url of my build log which I don't know the location of - anyone here know where that is ? I use SHARE_LOG=yes as a parameter to compile.sh and my build machine is a x86_64 GNU/Linux with a 1gb ssd and 32gb of ram - please ignore the tag I couldn't find an appropriate one